Avoid image data have 0xff 0x00 0x00 lead to disturb bt1120/bt656
EAV and SAV sync signal, so enable yuv clip when bt1120/bt656 output.
Change-Id: I59d802814f3619641516254b88e82adc636c6cde
Signed-off-by: Sandy Huang <hjc@rock-chips.com>
Fix some modes that did not set the U/V address and
cause the output error of the YUV format image.
Signed-off-by: Yu Qiaowei <cerf.yu@rock-chips.com>
Change-Id: I41abd364576e0a73fd501f3dfc726eeaa6c9b118
Avoid image data have 0xff 0x00 0x00 lead to disturb bt1120 EAV and SAV
sync signal, so enable yuv clip when bt1120 output.
Change-Id: I103615bfecfbf812768b89fb42bfd3859950187b
Signed-off-by: Sandy Huang <hjc@rock-chips.com>
This patch adds uvc_function_suspend and uvc_function_resume
for uvc function. With this patch, if usb bus enter suspend
or resume state, the usb controller driver will call the
uvc_function_suspend or uvc_function_resume to send event
to uvc app.
Change-Id: I9c584aae25298747c5a287243cb3efd71c8adfe6
Signed-off-by: William Wu <william.wu@rock-chips.com>
The spi which's version is higher than ver 2 will automatically
enable this feature.
If the length of master transmission is uncertain, the RK spi slave
is better to automatically stop after cs inactive instead of waiting
for xfer_completion forever.
Change-Id: If99e51d35391b824f48e31a3e4508db036593c8a
Signed-off-by: Jon Lin <jon.lin@rock-chips.com>
arch cris & metag have been removed from supported archs.
The dts hard link files should also be removed, or the ctags
tool will give warning.
execute"ctags -R" or "gtags", output:
ctags: Warning: cannot open source file
"scripts/dtc/include-prefixes/cris" : No such file or directory
ctags: Warning: cannot open source file
"scripts/dtc/include-prefixes/metag" : No such file or directory
This patch was override by commit 9820464afd ("UPSTREAM:
devicetree: Move include prefixes from arch to separate
directory"), so apply it again.
Change-Id: I002617cde3f879bc8364f55502839b3c3cd2dd92
Signed-off-by: Liu Changcheng <changcheng.liu@intel.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Andy Yan <andy.yan@rock-chips.com>
(cherry picked from commit 8d14f31ec9)
add rockchip_rt5651_rk628 machine driver to support HDMIIn function
Signed-off-by: Binyuan Lan <lby@rock-chips.com>
Change-Id: I893afca69ba555a3a05751df32aa4461720d3ca4
Signed-off-by: Shunhua Lan <lsh@rock-chips.com>
When system restart, there are two rst actions of PMIC sleep if
board hardware support:
- 0b'00: reset the PMIC itself completely.
- 0b'01: reset the 'RST' related register only.
In the case of 0b'00, PMIC reset itself which triggers SoC NPOR-reset
at the same time, so the command: reboot load/bootload/recovery, etc
is not effect any more.
We add a cmd list to check if this reboot cmd is what we expect for 0b'01.
Signed-off-by: Joseph Chen <chenjh@rock-chips.com>
Change-Id: Ib87d031a9dc2edc3d0ee2ba5bfb0d647696bf494
if 3dlut enable and 3DLUT_UPDATE = 1,
will start read lut at following case:
1. isp force update
2. frame end
2->1 shouldn't for 3dlut.
Change-Id: I82d03836035bc06e25839fe4d90dba7cd36c2e1a
Signed-off-by: Cai YiWei <cyw@rock-chips.com>
Panel Self Refresh (PSR), originally introduced in eDP v1.3, is an
optional feature for Source and Sink devices.
Signed-off-by: Wyon Bi <bivvy.bi@rock-chips.com>
Change-Id: I39c357d7caefc087241407a7d6b452e47e16eb9a
1. fix g_mbus_config lane config issues
2. add debug info
3. add r1a version support
Signed-off-by: Wang Panzhenzhuan <randy.wang@rock-chips.com>
Change-Id: I7ef54d8216597963a90e60d5a57859818c07c929
Data will divide into multi parts to calculating while buffer not
aligned, and crypto BC_CTL/HASH_CTL only be initialized at first
time. Crypto module will be stuck at second calculations if
BC_CTL/HASH_CTL is cleared after every calculations.
Change-Id: I753c4cefbcefcbf38f36f9a6798f406979b4d17d
Signed-off-by: Lin Jinhan <troy.lin@rock-chips.com>
If update too early, the message is always "deep" even mem_sleep
is lite or ultra.
We expect the right message:
"PM: suspend entry (ultra)" or "PM: suspend entry (lite)".
Fixes: 362667b0e3 ("PM / sleep: support mem_lite/mem_ultra mode")
Signed-off-by: Joseph Chen <chenjh@rock-chips.com>
Change-Id: I15086d04cd05ec9f296c92e2f9adb8c0bfa32f33
Test on RV1126 board with UVC function. When do UVC streaming on/off
@H265 3840 * 2160 stress test, it fails to streaming on UVC with the
following log:
[ 1589.834573] WARNING: CPU: 3 PID: 3075 at drivers/usb/dwc3/gadget.c:1611 dwc3_gadget_ep_queue+0x148/0x178
[ 1589.834593] ep3in: request 638c13d3 already in flight
[ 1589.834603] Modules linked in: galcore(O)
[ 1589.834622] CPU: 3 PID: 3075 Comm: kworker/3:2 Tainted: G W O 4.19.111 #2
[ 1589.834631] Hardware name: Generic DT based system
[ 1589.834648] Workqueue: events uvcg_video_pump
[ 1589.834673] [<b010f408>] (unwind_backtrace) from [<b010b96c>] (show_stack+0x10/0x14)
[ 1589.834741] [<b010b96c>] (show_stack) from [<b0645104>] (dump_stack+0x90/0xa4)
[ 1589.834766] [<b0645104>] (dump_stack) from [<b0126204>] (__warn+0xfc/0x114)
[ 1589.834787] [<b0126204>] (__warn) from [<b0126260>] (warn_slowpath_fmt+0x44/0x68)
[ 1589.834806] [<b0126260>] (warn_slowpath_fmt) from [<b04571d8>] (dwc3_gadget_ep_queue+0x148/0x178)
[ 1589.834826] [<b04571d8>] (dwc3_gadget_ep_queue) from [<b0472074>] (uvcg_video_pump+0x94/0x164)
[ 1589.834849] [<b0472074>] (uvcg_video_pump) from [<b013cce0>] (process_one_work+0x1f0/0x408)
[ 1589.834869] [<b013cce0>] (process_one_work) from [<b013d9b8>] (worker_thread+0x30/0x564)
[ 1589.834891] [<b013d9b8>] (worker_thread) from [<b0142910>] (kthread+0x140/0x170)
[ 1589.834907] [<b0142910>] (kthread) from [<b01010d8>] (ret_from_fork+0x14/0x3c)
[ 1589.834922] Exception stack(0xbbdfffb0 to 0xbbdffff8)
[ 1589.834938] ffa0: 00000000 00000000 00000000 00000000
[ 1589.834953] ffc0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
[ 1589.834966] ffe0: 00000000 00000000 00000000 00000000 00000013 00000000
[ 1589.834979] ---[ end trace b30d445a1f050523 ]---
[ 1589.834979] ---[ end trace b30d445a1f050523 ]---
[ 1589.834992] Failed to queue request (-22).
It's because that the __dwc3_gadget_start_isoc is called very late after
XferNotReady, so the frame number is outdated and start transfer fail
with the cmd_status "DEPEVT_TRANSFER_BUS_EXPIRY". In this case, the dwc3
driver return -EINVAL to the UVC function driver without delete and unmap
the failed request, this cause the request requeue fail next time.
Change-Id: I4cc919bcd4e1e0abbb6a929483e6fc2fe7dc9750
Signed-off-by: William Wu <william.wu@rock-chips.com>
