pulseaudio ucm2 config can not handle the character "," or long name,
so change it.
Signed-off-by: XiaoTan Luo <lxt@rock-chips.com>
Change-Id: I79cfc70089227cceb9d792c171551f1d95eb6ded
The clk_inv feature of rgb depends on the sys_grf.
Signed-off-by: Damon Ding <damon.ding@rock-chips.com>
Change-Id: Id2588f6c389b2e53c7260670e4d4fe9e8c6b9aea
According to the SI report, reduce the driver strength
from 40ohm to 50ohm.
Signed-off-by: Damon Ding <damon.ding@rock-chips.com>
Change-Id: Iffd65851dfe6ac8032764a3fb44334d5c3dcd154
1. fix set_fmt & ioctl get mode unmatched issue.
2. need to set default vblank when change format.
3. enum all supported mode mbus_code, not just cur_mode.
Signed-off-by: Wang Panzhenzhuan <randy.wang@rock-chips.com>
Change-Id: Ibca6481e11d8f97ce8827ff753c5f0afdf6f809c
When usb dp phy config as USB + DP mode, the phy clk is work
and the dp lane is enabled by initial action, whether the dp
function need work or not. In the case only usb function
work, which will consume more power.
To improve this issue, we release the dp phy pll reset and
enable the dp lane when dp power on.
Signed-off-by: Zhang Yubing <yubing.zhang@rock-chips.com>
Change-Id: I678edc130ddef07f85b007577089a9689e12e2d4
In the current implementation, the U3 PHY init is invoked earlier than
U2 PHY by DWC3 controller. However, the DWC3 needs UTMI clock provided
by U2 PHY when U3 PHY is ready, without this dependence, the DWC3 gadget
may be abnormal while the cable switch to U2 port from U3 port.
So exporse the UTMI clock to U3 PHY to fix it simply.
Signed-off-by: Frank Wang <frank.wang@rock-chips.com>
Change-Id: Id20e65dde5bff3b5eccf8325e7010351aaa65654
drivers/net/wireless/rockchip_wlan/rkwifi/bcmdhd/dhd_linux.c:20403:3: error: member reference base type 'void' is not a structure or union
mutex_destroy(mtx);
^~~~~~~~~~~~~~~~~~
./include/linux/mutex_rt.h:53:48: note: expanded from macro 'mutex_destroy'
Signed-off-by: Tao Huang <huangtao@rock-chips.com>
Change-Id: I087fb3469769b6e0c23f5e937514be3452f2197a
The system_dma32 heap should allocate pages with GFP_DMA32, from
dma32_pool.
Fixes: 8880c05e5a ("ANDROID: dma-buf: system_heap: support to allocate pages with GFP_DMA32")
Change-Id: I3e9f123b653cd50873cd8dd40d31c46968ad4a43
Signed-off-by: Jianqun Xu <jay.xu@rock-chips.com>
Use the HPD state machine state in detect instead of HPD_STATUS.
Signed-off-by: Wyon Bi <bivvy.bi@rock-chips.com>
Change-Id: I9e6b14c819fa29dd38101340e40334f050832524
https://source.android.com/security/bulletin/2021-12-01
CVE-2021-33909
CVE-2021-38204
CVE-2021-0961
* tag 'ASB-2021-12-05_12-5.10': (3010 commits)
ANDROID: workqueue: export symbol of the function wq_worker_comm()
ANDROID: GKI: Update symbols to symbol list
ANDROID: vendor_hooks: Add hooks for binder proc transaction
ANDROID: GKI: Add symbols abi for USB IP kernel modules.
ANDROID: GKI: Fix file mode on mtk abi file
UPSTREAM: erofs: fix deadlock when shrink erofs slab
ANDROID: init_task: Init android vendor and oem data
UPSTREAM: sched/core: Mitigate race cpus_share_cache()/update_top_cache_domain()
ANDROID: Update symbol list for mtk
UPSTREAM: erofs: fix unsafe pagevec reuse of hooked pclusters
UPSTREAM: erofs: remove the occupied parameter from z_erofs_pagevec_enqueue()
UPSTREAM: usb: dwc3: gadget: Fix null pointer exception
ANDROID: fips140: support "evaluation testing" builds via build.sh
FROMGIT: sched/scs: Reset task stack state in bringup_cpu()
ANDROID: dma-buf: heaps: fix dma-buf heap pool pages stat
ANDROID: ABI: Add several spi_mem related symbols
UPSTREAM: spi: spi-mem: add spi_mem_dtr_supports_op()
ANDROID: gki_defconfig: enable CONFIG_SPI_MEM
ANDROID: ABI: Add several iio related symbols
ANDROID: ABI: Update symbol list for IMX
...
Change-Id: I09cddc92fa34553b944e62cc5cbbba94a84e5437
Conflicts:
arch/arm/boot/dts/rk322x.dtsi
arch/arm64/boot/dts/rockchip/rk3399.dtsi
drivers/dma-buf/heaps/system_heap.c
drivers/gpu/drm/rockchip/dw-mipi-dsi-rockchip.c
drivers/gpu/drm/rockchip/rockchip_drm_vop.c
drivers/gpu/drm/rockchip/rockchip_lvds.c
drivers/gpu/drm/rockchip/rockchip_vop_reg.c
drivers/mtd/nand/spi/core.c
drivers/pci/controller/pcie-rockchip-host.c
drivers/soc/rockchip/Kconfig
drivers/usb/dwc3/core.c
drivers/usb/dwc3/core.h
55ohm is the recommended value after hardware signal test.
Change-Id: Iddb2d9eabfc5abb79662e25f40f5b332864aed15
Signed-off-by: Jon Lin <jon.lin@rock-chips.com>
Insert the self-powered Type-C device(support specification Revision 3.0),
after the Type-C PD chip cc detection is completed, the power role and
data role on the port side are sink and device(ufp)respectively.
After the power supply negotiation is completed, before the self-powered
Type-C device initiates the DR_swap request, the port side initiates VDM
Message communication. The process is as follows:
(1) The port side sends Discover Identity, Discover SVIDs, Discover Modes
Command in turn, and receives the ACK corresponding to the command on
the device side. The tcpm framework calls tcpm_register_partner_altmodes()
to register the partner altmode;
(2) After registering partner altmode, dp driver will start dp->work, and
call the tcpm framework callback function in this work to initiate Enter
Modes Command;
(3) After the port side receives the DR_swap request initiated by the Type-C
device and processes it, the port side data role switches to host (dfp),
then the tcpm framework initiates vdm message communication again, that is,
the restart process (1) Repeat registration of partner altmode, Then print
stack information:
[ 31.786238][ T193] Call trace:
[ 31.786251][ T193] dump_backtrace+0x0/0x1d0
[ 31.786257][ T193] show_stack+0x14/0x20
[ 31.786266][ T193] dump_stack_lvl+0xcc/0xf0
[ 31.786272][ T193] dump_stack+0x14/0x50
[ 31.786280][ T193] sysfs_warn_dup+0x60/0x78
[ 31.786286][ T193] sysfs_do_create_link_sd.isra.2+0xe0/0xe8
[ 31.786292][ T193] sysfs_create_link+0x20/0x40
[ 31.786300][ T193] typec_probe+0x90/0x100
[ 31.786308][ T193] really_probe+0x20c/0x3e8
[ 31.786315][ T193] driver_probe_device+0x54/0xb8
[ 31.786324][ T193] __device_attach_driver+0x90/0xc0
[ 31.786334][ T193] bus_for_each_drv+0x70/0xc8
[ 31.786347][ T193] __device_attach+0xec/0x150
[ 31.786357][ T193] device_initial_probe+0x10/0x18
[ 31.786369][ T193] bus_probe_device+0x94/0xa0
[ 31.786381][ T193] device_add+0x45c/0x750
[ 31.786388][ T193] device_register+0x1c/0x28
[ 31.786394][ T193] typec_register_altmode+0x1ec/0x308
[ 31.786400][ T193] typec_partner_register_altmode+0xc/0x18
[ 31.786406][ T193] tcpm_pd_rx_handler+0x16f8/0x1748
[ 31.786413][ T193] kthread_worker_fn+0xd8/0x190
[ 31.786418][ T193] kthread+0x124/0x150
[ 31.786424][ T193] ret_from_fork+0x10/0x18
[ 31.786434][ T193] typec_displayport port0-partner.1: failed to create symlinks
[ 31.786443][ T193] typec_displayport: probe of port0-partner.1 failed with error -17
According to the PD2.0 and PD3.0 protocol specifications(see Section 6.4.4.2),
the Enter Mode Command can be started only when the data role is host(DFP) mode.
Therefore, when the port is in device(ufp) mode, the tcpm framework does not
register partner altmode.
Fixes: 2b5787ea0b ("usb: typec: tcpm: Raise vdm_sm_running flag only when VDM SM is running")
Change-Id: I76874be36179391d8008502ba4722f5e4c9eee70
Signed-off-by: Wang Jie <dave.wang@rock-chips.com>
A port of 8608d7c441 to ARM64. Both the
original code and this port are limited to dumping kernel addresses, so
don't bother if the registers are from a userspace process.
Change-Id: Idc76804c54efaaeb70311cbb500c54db6dac4525
Signed-off-by: Greg Hackmann <ghackmann@google.com>
Signed-off-by: Tao Huang <huangtao@rock-chips.com>
[ Upstream commit a59c68a6a3 ]
Currently user can configure UAC1 function with
parameters that violate UAC1 spec or are not supported
by UAC1 gadget implementation.
This can lead to incorrect behavior if such gadget
is connected to the host - like enumeration failure
or other issues depending on host's UAC1 driver
implementation, bringing user to a long hours
of debugging the issue.
Instead of silently accept these parameters, throw
an error if they are not valid.
Signed-off-by: Ruslan Bilovol <ruslan.bilovol@gmail.com>
Link: https://lore.kernel.org/r/1614599375-8803-5-git-send-email-ruslan.bilovol@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Tao Huang <huangtao@rock-chips.com>
Change-Id: I2993c5f99161149ac126d55baf54c954279483ff
[ Upstream commit 3713d5ceb0 ]
Currently user can configure UAC2 function with
parameters that violate UAC2 spec or are not supported
by UAC2 gadget implementation.
This can lead to incorrect behavior if such gadget
is connected to the host - like enumeration failure
or other issues depending on host's UAC2 driver
implementation, bringing user to a long hours
of debugging the issue.
Instead of silently accept these parameters, throw
an error if they are not valid.
Signed-off-by: Ruslan Bilovol <ruslan.bilovol@gmail.com>
Link: https://lore.kernel.org/r/1614599375-8803-4-git-send-email-ruslan.bilovol@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Change-Id: Ic6b7e292b60e838c53aab989d1f8b16798dc15e7
Signed-off-by: Tao Huang <huangtao@rock-chips.com>
