yj
a672372186
codec: 3028a & 3026 record enable
2013-08-06 18:17:20 +08:00
cym
ec6675df69
RK30/RK31:remove DDR2 and LPDDR1 support,merge ODT and DLL disable freq,
...
fix RK3188+ DLL bypass bug,and so on.
2013-08-06 17:21:21 +08:00
hhb
35c0172fff
mipi dsi: fix bug about mclk variation
2013-08-06 17:09:13 +08:00
hhb
d976e7cdcc
wdt: use two clock name that is wdt and pclk_wdt for all soc
2013-08-06 14:53:50 +08:00
黄涛
2703c55721
rk: refactor boot_mode code
2013-08-06 11:18:36 +08:00
hhb
2572d8667c
mipi dsi: add mclk change from 11289600 to 12M
2013-08-06 10:32:51 +08:00
lyz
17df9c669d
rk3026: usb: set gpio3c1 iomux to usb otg_drv
2013-08-06 09:43:10 +08:00
cym
779c94ea0a
RK3028A:fix compile err by ddr_freq.c
2013-08-05 18:26:06 +08:00
cym
c57530ce46
RK3168/RK3188:add DDR_CHANGE_FREQ_IN_LCDC_VSYNC
2013-08-05 17:22:43 +08:00
ddl
55dd5d2c89
camera: cif v0.3.d, support for rk3028a, and revert for 3188m commit
2013-08-05 16:51:54 +08:00
hjc
d2f82fa2f0
rk fb: add rk31xx interface rk_fb_poll_wait_frame_complete for ddr and fps freq
2013-08-05 16:30:24 +08:00
kfx
a98d749559
rk3026: rk3028a_tb: emmc support
2013-08-05 16:10:21 +08:00
kfx
e97088419a
iomux: add interface: iomux_is_set(unsigned int mode)
...
return value:
-1: mode is invalide
0 : mode is not set
1 : mode is set
2013-08-05 16:04:24 +08:00
wlq
297d866383
3G:add U7501 and a8530
2013-08-05 11:46:45 +08:00
lintao
148a250487
SD(io)/(e)MMC: update mmc flow, continue commit-sha19896ff517b38c2c2db17980a71dca8cd23fb8585
2013-08-05 10:39:07 +08:00
ZHW
b86e931a4e
rk3026: fix lvds finishing the recent changes
2013-08-05 09:40:18 +08:00
lintao
9896ff517b
SD(io)/(e)MMC: continue commit-sha1 ea8dee5391
2013-08-05 09:09:31 +08:00
lyz
31b466fe03
fix compile error , so sorry
2013-08-03 21:57:51 +08:00
黄涛
12c921d081
rk: mem_reserve: workaround for RGA driver, which may overflow on physical memory address parameter
2013-08-03 14:58:02 +08:00
黄涛
52827dabac
rk3026: fix boot secondary cpu fail
2013-08-03 14:27:51 +08:00
hjc
fda2986fec
rk3026_86v: add board and defconfig
2013-08-03 11:25:49 +08:00
lyz
28a0dc45bf
rk3026: usb: wake up by otg id & bvalid
2013-08-02 18:57:41 +08:00
lintao
ef39e5ccd3
Merge branch 'develop-3.0' of ssh://10.10.10.29/rk/kernel into develop-3.0
2013-08-02 18:13:13 +08:00
lintao
ea8dee5391
SDIO:
...
1. add SDIO v3.0
2. interface for set_volate retry while busy in ACMD41, 10 times will been TMO
2013-08-02 18:12:47 +08:00
chenxing
c426173536
rk3188: -t: set chip rk3188t uart init freq = 49.5M
2013-08-02 18:07:29 +08:00
chenxing
3b17288bab
rk3168: fix cpu_div default set error
2013-08-02 17:49:53 +08:00
chenxing
1428781714
rk3188: fix cpu_div default set error
2013-08-02 17:49:08 +08:00
chenxing
545b296efc
rk3026: add cif_in support
2013-08-02 17:43:08 +08:00
chenxing
df8225bff9
rk3026: set gpll=768M, cpll=594M as rk31xx
2013-08-02 17:20:51 +08:00
chenxing
2aff25e8de
rk3026: add more freq support
2013-08-02 16:54:42 +08:00
chenxing
9945847d8b
rk3026: add SOFT_RST_CPU_VCODEC to compatible with rk2928
2013-08-02 16:54:42 +08:00
xuhuicong
313eeecb7e
3028a hdmi: improve Signal consistency
2013-08-02 16:44:35 +08:00
xbw
2b0034ec2e
SDMMC:
...
1、add the support for SD Spec V3.0.
2、add the support for UHS-I
3. add the support for IDMA(Internal DMA)
4. eliminate the small flaw about some machines may crash because of sdio-interrupt.
2013-08-02 15:58:43 +08:00
yj
e24cfebf1d
codec: *** miss codec files again ***
2013-08-02 14:55:21 +08:00
kfx
bb2b61e6a5
rk3026: rk3028a_tb: pwm regulator support
2013-08-02 14:41:47 +08:00
yj
b1c92931e1
codec: 3028a & 3026, change str 3028 to 3026
2013-08-02 14:33:14 +08:00
kfx
f800aa79b5
rk3026: rk3028a_tb: fix wifi config: RK903->BCM4330
2013-08-02 12:29:27 +08:00
kfx
d489cd9790
rk3026: rk3028a_tb: wifi support
2013-08-02 10:44:40 +08:00
黄涛
1422cd135d
rk: ipp: only avaliable on arch rk29/rk30/rk3188
2013-08-02 10:29:04 +08:00
黄涛
cd84d3ade8
rk3026: devices.c: rename device_vpu_service to device_vpu, prevent duplicate add device
2013-08-02 10:17:16 +08:00
黄涛
bb2b91aa1b
rk: vpu_service: better support irq import by add new driver
2013-08-02 10:14:22 +08:00
黄涛
13da688b74
rk3026: tb: defconfig enable CC_OPTIMIZE_FOR_SIZE
2013-08-02 09:46:12 +08:00
lyz
b1cc8c9232
rk3026: usb: config usb fifo for device mode
2013-08-01 23:39:25 +08:00
xuhuicong
ebc870ae75
rk3028a hdmi: add pre-driver and main-driver strength to make signal more good
2013-08-01 22:00:40 +08:00
kfx
d65b248a58
rk3026: rk3028a_tb: sdmmc support
2013-08-01 20:57:11 +08:00
黄涛
0653d1650c
rk: mem_reserve: fix reserved_base_end when meminfo split by kernel
...
commit again, should with commit:
block: initialize the bounce pool if high memory may be added later
2013-08-01 20:44:13 +08:00
David Vrabel
e8b4bf3802
block: initialize the bounce pool if high memory may be added later
...
init_emergency_pool() does not create the page pool for bouncing block
requests if the current count of high pages is zero. If high memory
may be added later (either via memory hotplug or a balloon driver in a
virtualized system) then a oops occurs if a request with a high page
need bouncing because the pool does not exist.
So, always create the pool if memory hotplug is enabled and change the
test so it's valid even if all high pages are currently in the balloon
(the balloon drivers adjust totalhigh_pages but not max_pfn).
Signed-off-by: David Vrabel <david.vrabel@citrix.com >
Signed-off-by: Jens Axboe <axboe@kernel.dk >
2013-08-01 20:41:46 +08:00
黄涛
3aede2c91c
Revert "rk: mem_reserve: fix reserved_base_end when meminfo split by kernel"
...
This reverts commit 5443877020
2013-08-01 20:01:37 +08:00
黄涛
027eabd98b
rk3188: allow compile vpu_service on rk3188
2013-08-01 19:40:22 +08:00
黄涛
5443877020
rk: mem_reserve: fix reserved_base_end when meminfo split by kernel
2013-08-01 19:36:28 +08:00
