This patch adds restart-poweroff node to power off board
by restart system which has no pmic, no power-hold.
Signed-off-by: Sugar Zhang <sugar.zhang@rock-chips.com>
Change-Id: Ia26ae06bca4b3ab4dcf071cf8ff5c0dfeda26c80
This patch enable this config to allow power-off by restarting
system.
Signed-off-by: Sugar Zhang <sugar.zhang@rock-chips.com>
Change-Id: I3662a3d88a92bc6d628446f0d99b3cd2b74eda63
The GPIO0_B4 to GPIO0_D7 on RK3588 SoCs have two registers to configure
the pinmux, one is in pmugrf and the other is in grf.
When the value in pmugrf is '8' means the final pinmux is in the grf
register, this patch fixes the condition.
Fixes: 9b97628093 ("pinctrl: rockchip: fix rk3588 pinmux get")
Signed-off-by: Jianqun Xu <jay.xu@rock-chips.com>
Change-Id: Ia9f0bec25fbf9696f05b45ff806f2853df56d1c3
This patch wrap register access by lock which guarantee the clk
enabled first. and remove the unused CLK status from CMN.
Signed-off-by: Sugar Zhang <sugar.zhang@rock-chips.com>
Change-Id: Iba058ad08c71de0b118913216baec1886d8f3819
The reserved pre-scale buffer size is modified to the currently supported
maximum output size.
Signed-off-by: Yu Qiaowei <cerf.yu@rock-chips.com>
Change-Id: If2f2a1275466bfd39e9003e24e3cf0a848dccff1
1. The first parent name of sclk_cif_out_src is wrong, it is
"sclk_cif_src".
2. The MUX configuration for sclk_cif_out_src is wrong, it should
be muxdiv_offset=29, mux_shift=2, mux_width=1.
Change-Id: I36a0ec0791afdef398d37ac8b92b7831619fb01b
Signed-off-by: Liang Chen <cl@rock-chips.com>
Signed-off-by: Elaine Zhang <zhangqing@rock-chips.com>
Since kmalloc may not care about GFP_DMA32, change to use get free pages
for itt on its device.
To reduce the impact of this change, we only applied it to rk3566/rk3568.
Change-Id: I2e91c97bd4d61d2542cf437363fc3dd1d9fa669c
Signed-off-by: Jianqun Xu <jay.xu@rock-chips.com>
Signed-off-by: XiaoDong Huang <derrick.huang@rock-chips.com>
The current code uses 50ms sleep to wait for host only
mode, the delay time is not enough for some Rockchip
platforms (e.g RK3036G EVB1).
Test on RK3036G EVB1, the dwc2 host only controller reg
GOTGCTL.ConIDSts = 1'b1 (device mode) if only wait for
50ms. And the host fails to detect usb2 device with the
following error log:
usb usb2-port1: connect-debounce failed
This patch checks the GOTGCTL.ConIDSts for host only
mode and increases the maximum waiting time to 200ms.
Signed-off-by: William Wu <william.wu@rock-chips.com>
Change-Id: Ie28299934aba09907ea08f5fd3b34bf2fb35822e
At 32 bit platform size_t maximum value is 0xffffffff, SZ_4G(0x100000000) will
be cliped to 0, so we split into two mapping.
Fixes: 0da77f77c0 ("drm/rockchip: drv: add support pre mapping for vop iommu")
Signed-off-by: Sandy Huang <hjc@rock-chips.com>
Change-Id: I4066b1e20cfb9e29033b72f2035bf5e24a1f1f23
CVBS only support for 480i and 576i display mode. It is
needed for rk3036 to enable scaling when using interlace
mode, which also updated in this commit.
Signed-off-by: Damon Ding <damon.ding@rock-chips.com>
Change-Id: I1d131ec71c0b31680280353e1690f8c01eb3c94e
The related codes are ported from kernel-3.10. Tve interface
function has been tested on rk3036/rk3128/rk3228.
Signed-off-by: Damon Ding <damon.ding@rock-chips.com>
Change-Id: I5395bdccd7c645dfd34e9ccf166f3c94086e3134
caused by commit of thunderboot support
be07e90202262ebfe8b008e7ec5b0142ee54a99c
Signed-off-by: Su Yuefu <yuefu.su@rock-chips.com>
Change-Id: I54c19bd9084a004bb15fc6f9054138f2c81ff059
The clkreq is recommended:
1.Set as gpio property
2.Set as function io with supports-clkreq property enable
Change-Id: Idc72fa9190a3ec51876f3f5dce09d7e7a5201009
Signed-off-by: Jon Lin <jon.lin@rock-chips.com>
This fw fix some RX issue:
1. connect detect error;
2. transfer error in ssd huge data write(more than 10GB).
Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
Change-Id: If9b8d7fbe4414ae4d28ff6bbd4415d88b582113d
Allocate multiple jpeg enc cores to encode the same frame at the same time,
and than there is a dma cache coherence issue when the user
space copies bitstream data to another buffer.
So, need to invalid cache after every core encoding done.
Signed-off-by: Yandong Lin <yandong.lin@rock-chips.com>
Change-Id: I0868398f09787cdbd2be6f6a2cd3c1adbe61e4b5
