PD#SWPL-4427
Problem:
a green line displayed when output is yuv420 4k/60hz
Solution:
set dummy data to 0x808000 can fix a green line
displayed when output is yuv420 4k/60hz
Verify:
verify by fanklin
Change-Id: I06125d36c2fb06a61dd072a1789217e7c3705207
Signed-off-by: Pengcheng Chen <pengcheng.chen@amlogic.com>
PD#SWPL-4521
Problem:
New W411 reference board A53 power combine with vddee,
becaule vddee voltage set at 800mv,so need remove
A53 dvfs table which voltage greater than 800mv
Solution:
Remove A53 frequency table greater than 1.5Ghz
Verify:
Local
Change-Id: I05a2b51f704b25a0654881d6da3372fcd2f2a051
Signed-off-by: Dianzhong Huo <dianzhong.huo@amlogic.com>
PD#SWPL-3981
Problem:
the gpu shall not use the gp0 pll as vlsi guy's suggestion.
Solution:
rm 850M from gpu freq table
Verify:
Marconi, franklin
Change-Id: I38ae616de23d51ede36776f0ecd66d0a3df30459
Signed-off-by: Jiyu Yang <jiyu.yang@amlogic.com>
PD#SWPL-4482
Problem:
used wrong tuner
Solution:
set tuner to r842
Verify:
verify by t309
Change-Id: I22fb3b6800e9f8cdeb03a307067d07d3e2190be1
Signed-off-by: Lei Qian <lei.qian@amlogic.com>
PD#SWPL-3088
Problem:
g12b big-little cluster is different from other SoC with pmu
interrupts and registers.
software modifications must adapt to the difference.
Solution:
modify
Verify:
u200 w400
Change-Id: If9217c1025dff5c17d51790f8c216e31b7d6532b
Signed-off-by: Hanjie Lin <hanjie.lin@amlogic.com>
PD#SWPL-4261
Problem:
some devices have compatibility issues.
Solution:
1.update phy setting;
2.optimize some SW logic;
3.set eess_oess to auto mode;
4.fix black screen(DE fixed error,related with rx phy) issue.
Verify:
TL1 TXLX android P
Change-Id: I842a4782b3e513fa1e483feca98ce05b128d79fc
Signed-off-by: yicheng shen <yicheng.shen@amlogic.com>
Signed-off-by: Lei Yang <lei.yang@amlogic.com>
PD#TV-2088
Problem:
wifi can not power in driver
Solution:
export set_usb_wifi_power
Verify:
franklin
Change-Id: Ic6fb75133533c395cd96e9d82f14427cf40cee96
Signed-off-by: Rongjun Chen <rongjun.chen@amlogic.com>
PD#SWPL-4079
Problem:
hdr->sdr must have 1.5s delay, when switching from sdr->hdr
the work queue can't be eliminated in time.
Solution:
eliminate the work of sdr effect when choosing hdr
Verify:
u212
Change-Id: I4c1d5467a58253ffa2fa12dfbac7f504d0388a00
Signed-off-by: Yi Zhou <yi.zhou@amlogic.com>
PD#SWPL-4320
Problem:
The meson8b and arm64_a32 are both selected in Kconfig,
which is quite misleading
Solution:
Disable meson8b when arm64_a32 is selected
Verify:
Locally passed for Ampere
Change-Id: I93f55239ea90bf8cf6b96e108b6fd4a239de32b4
Signed-off-by: Jiamin Ma <jiamin.ma@amlogic.com>
PD#SWPL-3059
Problem:
vdin1 hisgram and screencap cannot be used simultaneously
Solution:
add vdin1 histgram,and make hist and screencap function to be compatible
Verify:
txlx r311
Change-Id: I759d1cdc69d59015ce845898990088eb6943cc41
Signed-off-by: xuhua zhang <xuhua.zhang@amlogic.com>
PD#SWPL-3739
Problem:
need bbc flow to init channel for tcon chpi
Solution:
add bbc flow support
Verify:
x301
Change-Id: I15a3e9a85fdf62359768ce8931374f9c730b49d1
Signed-off-by: Evoke Zhang <evoke.zhang@amlogic.com>
PD#SWPL-3294
Problem:
unify lcd pinmux usage in dts
Solution:
change lcd pinmux usage to be recommend by linux upstream
Verify:
verify by t962x_r311
Change-Id: I7069b5272fa779575a8111b12a3ed835ab72cd02
Signed-off-by: Shaochan Liu <shaochan.liu@amlogic.com>
PD#SWPL-4088
Problem:
There will be kernel panic when read edid via hdmirx
driver interface
Solution:
modify the rd_top interface
Verify:
TL1 android P
Change-Id: Ifb595cc66a2e792bc5153d726258deb7ba4e741c
Signed-off-by: yicheng shen <yicheng.shen@amlogic.com>
PD#SWPL-4272
Problem:
g12b_a311d_w400_buildroot.dts do not include add ir cut control GPIO
Solution:
add ir cut control GPIO to g12b_a311d_w400_buildroot.dts
Verify:
g12b_a311d_w400_buildroot
Change-Id: I771ea08ad6ab189060079b820a471e059b5eb72a
Signed-off-by: yu.zhang <yu.zhang@amlogic.com>
PD#SWPL-3365
Problem:
not resample for audio in, so output in wrong sample rate
Solution:
1. enable resample in dts
2. fix to check whether resample is needed
Verify:
x301
Change-Id: I99238cc21a00ab53df6a1f8ab1703bc9ab48cbaa
Signed-off-by: Xing Wang <xing.wang@amlogic.com>
PD#SWPL-3418
Problem:
[Einstein]when AC off/on,enter live TV ,
TV display blank screen and no signal about 5S
Solution:
use post-eq to track(0x912=0x50)
Verify:
verified by t962x_r311
Change-Id: I924c55a8f1c92328e4371cb730e1b03bd720457f
Signed-off-by: Zhiwei Yuan <zhiwei.yuan@amlogic.com>
PD#SWPL-915
Problem:
DOLBY only sets the enhancement for the first frame ->
Vd sets cur_dispubf2 according to enhance ->
codec_mm keeps the last frame according to cur_dispbuf2,
so it fails -> AFBC2 access to the released content causes the trigger.
Solution:
close afbc2
Verify:
r321
Change-Id: I03c431a6ea11b8aabf97b1f0b21f717024be2f62
Signed-off-by: Yi Zhou <yi.zhou@amlogic.com>
PD#SWPL-4255
Problem:
UI disable SDR TO HDR, reboot BOX,
TV flicker white and then display ok when connect hdr tv
Solution:
dr2hdr function set by uplayer, kernel default disable
Verify:
verify on G12A
Change-Id: Iea5a1e0be9b5665bb7deb785b6b5faa702ef1664
Signed-off-by: MingLiang Dong <mingliang.dong@amlogic.com>
PD#SWPL-3951
Problem:
buffer malloc for dtb may failed
Solution:
malloc may sleep to wait for enough memory
Verify:
pass on p212
Change-Id: Ib4c266c17140d2a6abf2aea6c02b2ff591f0fe08
Signed-off-by: Ruixuan Li <ruixuan.li@amlogic.com>
PD#SWPL-4150
Problem:
When switch to the toolchain shipped with android P, multipile
"-Werror=maybe-uninitialized" error occurs, and the code fail
to be compiled
Solution:
Initialize variables if necessary
Verify:
Locally on Ampere
Change-Id: I280de648914565656831e211539bf41a7dee2b4a
Signed-off-by: Jiamin Ma <jiamin.ma@amlogic.com>
PD#SWPL-3226
Problem:
turn off the dv core, the osd flutters
Solution:
keeping core2 open when dv enable under sdr TV
Verify:
u212
Change-Id: Idf57c6e67676fb5eec944e543cb596247c932df4
Signed-off-by: Yi Zhou <yi.zhou@amlogic.com>
PD#SWPL-4048
Problem:
omx can not detect first frame have toggled
Solution:
omx get first frame toggoled flag
Verify:
verify by p212
Change-Id: I632824390287dd0257dca23a009ff8851054f68d
Signed-off-by: shuanglong.wang <shuanglong.wang@amlogic.com>
PD#SWPL-4194
Problem:
Systemcontorl set display mode when attr is difference
Solution:
Fix color space property parser
Verify:
G12A/U200
Change-Id: Iddbcbbf3925b175833f534a287de413315ca1170
Signed-off-by: Kaifu Hu <kaifu.hu@amlogic.com>
PD#SWPL-4075
Problem:
add enhanced hsc adv num support
Solution:
add enhanced hsc adv num support
Verify:
verified on g12b-w400
Change-Id: I13b52a0b10e8f3830c57ff691ef3472a34cbe89c
Signed-off-by: Jian Cao <jian.cao@amlogic.com>
PD#SWPL-4075
Problem:
dst data is not normal by using strechblit function
such as 1920x1080 --> 640x360
Solution:
add bit width restriction for
horizontal scaler initial phase
Verify:
verified on g12b-w400
Change-Id: Ibcd85cc08f49254e90100beb952e711736531134
Signed-off-by: Jian Cao <jian.cao@amlogic.com>
PD#SWPL-3876
Problem:
add support for nv16
Solution:
add support for nv16
Verify:
verified on g12a-u200
Change-Id: I34c9179ed4fde43b9bd00caa9505ea4c8ee78eb0
Signed-off-by: Jian Cao <jian.cao@amlogic.com>
PD#SWPL-4073
Problem:
warning of CPU Tainted
Solution:
add spin lock when R/D reg
Verify:
verify by marconi
Change-Id: I8f47666f41c0ba3a010631f5d71416aad0e43beb
Signed-off-by: Lei Yang <lei.yang@amlogic.com>
PD#SWPL-3384
Problem:
DI post holdline setting is not map with video
Solution:
change holdline to 8
Verify:
verified by gxl
Change-Id: Ia352604086cefb4c69d5dd268d12741c4cf4f173
Signed-off-by: Jihong Sui <jihong.sui@amlogic.com>
PD#SWPL-3715
Problem:
set startup to TV,when DVD power on,the platform
autoshutdown after enter HDMI source
Solution:
suspend condition is wrong when not in suspend mode.
Verify:
TL1 (X301_T962x2)
Change-Id: I057cfe6b9a7f5806fa54eac063c02a7e3dc0179e
Signed-off-by: Yong Qin <yong.qin@amlogic.com>
PD#SWPL-2952
Problem:
Pop noise could be heard
when switching between sources.
Solution:
1. Add stream digital mute functions.
2. continuous clock to eliminate
the clk reset issue.
Verify:
Local verified.
Change-Id: I372f4c03aaf875d75aa903c9c2dfda00619af000
Signed-off-by: Shuai Li <shuai.li@amlogic.com>
PD#SWPL-3103
Problem:
dolby files have no sounds after replay
Solution:
in x301, the clk_81 is null when init, it is releated
to demux pcr, so add clk_81 to enable demux pcr
Verify:
verify by X301
Change-Id: Id11549fe7a8b156206ac7004e31575fd5d309254
Signed-off-by: Xiaoming Sui <xiaoming.sui@amlogic.com>
PD#SWPL-2634
Problem:
eyetest mode is a little unstable
Solution:
adjust the tuning mode of the fixed adj
Verify:
R311
Change-Id: I6112e0078bf013d2a4cfe4ff04210f1d15e3439d
Signed-off-by: long yu <long.yu@amlogic.com>
