These controllers use the same clk for tx/rx.
Signed-off-by: Sugar Zhang <sugar.zhang@rock-chips.com>
Change-Id: Ie9a0adb950cdc584761c1079cb45e58d5eafccfb
Reserved 8M for cma heap, the node' name will be used as heap' name.
Also add ramoops and logo node.
Signed-off-by: Jianqun Xu <jay.xu@rock-chips.com>
Change-Id: I50654b1122126bb54092e3933d1a36cadf8d4ec5
When enter low temperature mode, system monitor update opp table, then
check and change the current voltage for cpu, but now the opp voltage
inside cpu_opp_helper() may be old, the current voltage may be changed
back to old value. Move the volt_adjust_mutex out of dev_pm_opp_set_rate()
so that the opp voltage inside cpu_opp_helper() will be latest.
Signed-off-by: Finley Xiao <finley.xiao@rock-chips.com>
Change-Id: I9a91775dc9b5443e4b47b4255de6e21133c32404
If read multiple channels at the same time, channel 1 will
error, add assert when start saradc as a workaround.
Change-Id: Iababf604b200555a46a96e1ca0bc7108c6df8680
Signed-off-by: Simon Xue <xxm@rock-chips.com>
The RK3588 SoC has seven channels TS-ADC(TOP, BIG_CORE0, BIG_CORE1,
LITTEL_CORE, CENTER, GPU, and NPU).
Change-Id: I940a10c8062ba73876f2dfd133ab8ea60ad3a799
Signed-off-by: Finley Xiao <finley.xiao@rock-chips.com>
Just print out POST_BUF_EMPTY_INT err irq if it happened.
Signed-off-by: Andy Yan <andy.yan@rock-chips.com>
Change-Id: Ia1d3747c94d432ca8451f38e10d32a82bbf7b958
It's optional on RK3588 platform which support dsm only.
Signed-off-by: Sugar Zhang <sugar.zhang@rock-chips.com>
Change-Id: I3cbe3a3bb7789eab2a279403d359a58f1fd85c7b
On RK3568: this bit is Auto gating enable
on RK3588: this bit is gating disable(we must set it to 1 when afbc
enable)
Signed-off-by: Andy Yan <andy.yan@rock-chips.com>
Change-Id: If689c587c6df9e1e8c6ff670d30e62c53b621194
Configuration is flexible than hard code, and minimal changes.
Change-Id: I15835fcbf198252410feb3feb6080ca047388ce1
Signed-off-by: Ziyuan Xu <xzy.xu@rock-chips.com>
Signed-off-by: Sugar Zhang <sugar.zhang@rock-chips.com>
Remove a regulator-fixed node without gpio enable pin from evb dtsi,
move them to next level board dt file.
The vcc3v3_lcd0_n regulator is a software virtual regulator for camera
module to push high/low level from a gpio but through regulator
enable/disable.
Signed-off-by: Jianqun Xu <jay.xu@rock-chips.com>
Change-Id: I1f587fe1ca0ef9d31c6cba5362c1912b7208f293
tips:
1. this driver supports one or multi-core device.
2. the multi-core method is the same as vepu2.
'commit 88fa5fa5675b ("video: rockchip: mpp: vepu: add ccu for
multi-core device")'
Change-Id: Iee54b7d5c24104e64e66fcc684b83665c61e6b58
Signed-off-by: Ding Wei <leo.ding@rock-chips.com>
tips:
1. CCU is short-name for the central control unit.
2. In multi-core processing, CCU is used to balance the scheduling of
each core.
3. The scheduling criteria are the number of tasks in the current queue
and the total number of completed tasks.
Change-Id: I178211550d4f4e40fd23dcff5a76220ccada6b71
Signed-off-by: Ding Wei <leo.ding@rock-chips.com>
This patch supports some type of machine drivers that set 0 to mclk
when sound device goes to idle state. After applied this patch,
sysclk == 0 means there is no constraint of sound rate and other
values will set constraints which is derived by sysclk setting.
Signed-off-by: Katsuhiro Suzuki <katsuhiro@katsuster.net>
Link: https://lore.kernel.org/r/20190903165322.20791-2-katsuhiro@katsuster.ne
Signed-off-by: Shunhua Lan <lsh@rock-chips.com>
Change-Id: If0a478f0cb46fa502cdf0d4e017ac2f36166055a
In order to make clock definition more flexible, use bulk
clk API instead.
Signed-off-by: Shawn Lin <shawn.lin@rock-chips.com>
Change-Id: I5f44c67e9d4c4d812b34a53f9f106cb2134b7199
