1. Support procfs, both debugfs and procfs.
2. Modify the debug node name:
/sys/kernel/debug/rga2_debug/rga2
-> /sys/kernel/debug/rkrga/debug
-> /proc/rkrga/debug (add)
3. Add a node to view the driver version number: driver_version.
4. Add CONFIG_ROCKCHIP_RGA2_PROC_FS/ROCKCHIP_RGA2_DEBUG_FS/
ROCKCHIP_RGA2_DEBUGGER, Where CONFIG_ROCKCHIP_RGA2_PROC_FS
defaults to n, CONFIG_ROCKCHIP_RGA2_DEBUGGER defaults to y.
Signed-off-by: Yu Qiaowei <cerf.yu@rock-chips.com>
Change-Id: I89a971f18301ffa9cc7ac1962ebeee5e97d209aa
ROLE_CONTROL register would not have the actual CC terminations
unless the port does not set ROLE_CONTROL.DRP. For DRP ports,
CC_STATUS.cc1/cc2 indicates the final terminations applied
when TCPC enters potential_connect_as_source/_sink.
For DRP ports, infer port role from CC_STATUS and set corresponding
CC terminations before setting the orientation.
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Signed-off-by: Badhri Jagan Sridharan <badhri@google.com>
Link: https://lore.kernel.org/r/20200901025927.3596190-4-badhri@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Wang Jie <dave.wang@rock-chips.com>
Change-Id: I108119eb0d9accf5697b9d69f1188766c2bdb0b9
(cherry picked from commit 57ce64668f)
"tReceiverResponse 15 ms Section 6.6.2
The receiver of a Message requiring a response Shall respond
within tReceiverResponse in order to ensure that the
sender’s SenderResponseTimer does not expire."
When the cpu complex is busy running other lower priority
work items, TCPM's work queue sometimes does not get scheduled
on time to meet the above requirement from the spec.
Moving to kthread_work apis to run with real time priority.
Further, as observed in 1ff688209e, moving to hrtimers to
overcome scheduling latency while scheduling the delayed work.
TCPM has three work streams:
1. tcpm_state_machine
2. vdm_state_machine
3. event_work
tcpm_state_machine and vdm_state_machine both schedule work in
future i.e. delayed. Hence each of them have a corresponding
hrtimer, tcpm_state_machine_timer & vdm_state_machine_timer.
When work is queued right away kthread_queue_work is used.
Else, the relevant timer is programmed and made to queue
the kthread_work upon timer expiry.
kthread_create_worker only creates one kthread worker thread,
hence single threadedness of workqueue is retained.
Change-Id: Iafd9ca68a00b61e39cc9de2609eaef2c277eabb0
Signed-off-by: Badhri Jagan Sridharan <badhri@google.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Link: https://lore.kernel.org/r/20200818192758.2562908-1-badhri@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Wang Jie <dave.wang@rock-chips.com>
(cherry picked from commit 3ed8e1c2ac)
According to commit 9bde4e671f ("drm/rockchip: vop: fix iommu crash
with async atomic")
These two callback were added to avoid iommu crash on async
commit caused by drm_atomic_clean_old_fb after drm_atomic_async_commit.
drm_atomic_clean_old_fb was removed after commit
e00fb8564e ("drm: Stop updating plane->crtc/fb/old_fb on atomic drivers")
So we can remove them to make life simpler.
Change-Id: Iea1f2dbadd9bcfad5b8447831c0d31068d4fa97b
Signed-off-by: Andy Yan <andy.yan@rock-chips.com>
We assign window between vp by plane_mask now, no
need to check which vp is activated from register.
Change-Id: I89d22f253dcd26898dc79304d51b8a8d9e802bb2
Signed-off-by: Andy Yan <andy.yan@rock-chips.com>
Rockchip platforms don't support HS200 or HS400 at low speed, so
we must limit it.
Signed-off-by: Shawn Lin <shawn.lin@rock-chips.com>
Change-Id: I40eb9f117fd83789b6ab7a16d44049e16786698b
As we mask our SDHCI controller as SDHCI_QUIRK_CAP_CLOCK_BASE_BROKEN,
host->max_clk is derived from core clock in the first place. Then
f_max works together with it.
If we adjust loader's core clk setting, such as 50MHz, we will get
50MHz for host->max_clk, because .get_max_clock() reads core clk
when probing driver. That will lead f_max be set to 50MHz as well,
no matter if max-frequency is set higher than 50MHz.
We can simple solve this problem by assigning core clk as 200MHz
in the first place and then let max-frequency property takes over
it.
Signed-off-by: Shawn Lin <shawn.lin@rock-chips.com>
Change-Id: Idb2fdb8f68881d0286d977dc3718b74c30d3bc67
Enable lt6911uxc HDMI to MIPI CSI-2 bridge driver for hdmi-in
application. Which found on rk3568-evb2-lp4x-v10.
Signed-off-by: Dingxian Wen <shawn.wen@rock-chips.com>
Change-Id: I4ce22f3040dbe55c3236ac3d0ac62f7821011c8d
Do not print error information when pin is not mux to gpio,
since it will break debug print.
Also check the gpio direction before check gpio value.
Change-Id: Id3afb0af12cd1e33677f5a929a879f7d00f63318
Signed-off-by: Jianqun Xu <jay.xu@rock-chips.com>
rv1126 does not support display interface which need to
read and parse edid, such as hdmi and dp, so add config
option to reduce memory usage.
./ksize.sh drivers/gpu/drm/
before ksize: 482336 Bytes
after kszie: 396762 Bytes
save about: 85574 Bytes
Signed-off-by: Algea Cao <algea.cao@rock-chips.com>
Change-Id: I0c3813711cfdb4a38ec66136569ca826c94c6c58
Add config option to modularize the DP interface support of DRM.
make ARCH=arm rv1126_defconfig
make ARCH=arm rv1126-evb-ddr3-v13.img -j32
./ksize.sh drivers/gpu/drm/
before ksize: 517946 Bytes
after kszie: 482336 Bytes
save about: 35610 Bytes
Signed-off-by: Damon Ding <damon.ding@rock-chips.com>
Change-Id: Ie2157fad13a71a3099b79085e0de40efe4b4ab34
rv1126 does not support PSR function, so add config option to
reduce memory usage.
make ARCH=arm rv1126_defconfig
./ksize.sh drivers/gpu/drm/
before ksize: 581268 Bytes
after kszie: 579486 Bytes
save about: 1782 Bytes
Signed-off-by: Damon Ding <damon.ding@rock-chips.com>
Change-Id: I578bb6f4768ae807b6fc20987d421afefd421fcc
Kernel's SFC is used for a private flash drivers not like
the standard one, but u-boot SFC is register as standard
spi, and the alias UCLASS_SPI id is required for part of
spi initialization progress. So kernel's alias is also
required when u-boot enable using kernel dtb case.
Change-Id: Ic763eefb35ef5a93f6121055a5e04a2d72636430
Signed-off-by: Jon Lin <jon.lin@rock-chips.com>
Some linux app(cusor) may set negative coordinates(crtc_x/y)
And some linux app(mpv) may set coordinates outside the screen.
These are both unsupported on rockchip vop.
so we use clipped coordinates here.
Change-Id: I63288cf9120cea75e784d49bc88b591f243e7d8d
Signed-off-by: Andy Yan <andy.yan@rock-chips.com>
Look at the pinmux-functions debug node, there are several pcfg_xxx
nodes which actually are not pinctrl functions:
Under RV1126 EVB:
function: pcfg-pull-up, groups = [ ]
function: pcfg-pull-down, groups = [ ]
function: pcfg-pull-none, groups = [ ]
function: pcfg-pull-none-drv-level-1, groups = [ ]
function: pcfg-pull-none-drv-level-2, groups = [ ]
function: pcfg-pull-none-drv-level-3, groups = [ ]
function: pcfg-pull-up-drv-level-1, groups = [ ]
function: pcfg-pull-up-drv-level-2, groups = [ ]
function: pcfg-pull-none-smt, groups = [ ]
function: pcfg-output-low-pull-down, groups = [ ]
function: acodec, groups = [ acodec-pins ]
This patch fixs the function node valid check to ignore them.
Change-Id: I432783de72e137e2fb406ce400a69cd56cb1a8de
Signed-off-by: Jianqun Xu <jay.xu@rock-chips.com>
There are many kinds of nodes under pinctrl node, such as function
nodes, gpio nodes, and pcfg nodes.
The driver do a match check for the nodes, to ignore the gpio nodes.
This patch try to put the valid check as a function, it's better to
avoid error fix.
Change-Id: Ib9295fa77240f741a0a124d3235f5e2a6e51b499
Signed-off-by: Jianqun Xu <jay.xu@rock-chips.com>
Select DRM_PANEL_SIMPLE_OF_ONLY as default on RV1126 SoC, so as to
reduce memory usage.
make ARCH=arm rv1126_defconfig
make ARCH=arm rv1126-evb-ddr3-v13.img -j32
./ksize.sh drivers/gpu/drm/
before ksize: 556038 Bytes
after kszie: 517946 Bytes
save about: 38092 Bytes
Signed-off-by: Damon Ding <damon.ding@rock-chips.com>
Change-Id: I9584bd8de16ed0ef1c4a862e71a1eb725c0d2833
mpp build only one ko and all option config is bool.
Signed-off-by: Tao Huang <huangtao@rock-chips.com>
Change-Id: Id940f29a351d81c301a1ca100b8ebee828b8cc81
Using CONFIG_CPU_XX only compiles the code of matching CPU,
then it can reduce the object file.
Change-Id: Ic19345464c802939d08786ae29b34111c3c5a855
Signed-off-by: Ding Wei <leo.ding@rock-chips.com>
move the workaround functions for px30 to the mpp_hack_px30.c.
Change-Id: I9f9880c28fe1d797b0551d116a66294223a5e251
Signed-off-by: Ding Wei <leo.ding@rock-chips.com>
For kernel-tiny, remove debug relative code, and reduce the size of module.
Change-Id: Ic78a0839a75c9cebb56fa32e87235bd97be0370a
Signed-off-by: Ding Wei <leo.ding@rock-chips.com>
- correct the wrong type 'RK3229', should be type 'RK3328'
- rename compatible 'rockchip,pdm' to 'rockchip,rk3328-pdm'
for better match.
Change-Id: I0156bd114a3a89ddcda077587366351521dfb701
Signed-off-by: Sugar Zhang <sugar.zhang@rock-chips.com>
Separate the process of device matching by the different SoC macro
definitions, which can reduce memory usage.
make ARCH=arm rv1126_defconfig
./ksize.sh drivers/gpu/drm/
before ksize: 579486 Bytes
after kszie: 556038 Bytes
save about: 23448 Bytes
Signed-off-by: Damon Ding <damon.ding@rock-chips.com>
Change-Id: I6b3689b11598120aad16956235d1ee2bbdbe80e0
rv1126 does not support VOP2, so add config options to
reduce memory usage.
make ARCH=arm rv1126_defconfig
./ksize.sh drivers/gpu/drm/
before ksize: 675434 Bytes
after kszie: 581268 Bytes
save about: 94166 Bytes
In addition, improve the format of space and tab, and remove
extra "depends on DRM_ROCKCHIP".
Signed-off-by: Damon Ding <damon.ding@rock-chips.com>
Change-Id: I2b29a543a7e52e4e4b72112980e2c6dc6c6cce92
