The MIPI DSI do not need check the validity of resolution, the max resolution
should depend VOP. So remove rk3288_mipi_dsi_mode_valid here.
Change-Id: I789d184f9a14010795fe595ef31e1bea5d1022e0
Signed-off-by: Chris Zhong <zyw@rock-chips.com>
Support for some evb3 with edp screen, and with new touchscreen.
Change-Id: I8624ae38faef63aa5205861cfebb2a04f7bb8b30
Signed-off-by: Jianqun Xu <jay.xu@rock-chips.com>
Tested-by: Frank Wang <frank.wang@rock-chips.com>
With atomic helpers there's no need to track the enabled state of a pipe
any more, because atomic helpers track this accurately already.
Change-Id: Ic2441b5acefe327cdef797aca88f6a2098643c69
Signed-off-by: Mark Yao <mark.yao@rock-chips.com>
In rk3036, the voltages of CPU and GPU are controlled by the same
regulator 'vdd_cpu'.
Here, we fix it to 1.25v to ensure that GPU could work well in
development period.
The actual voltage GPU needs might be much lower, and relative to
the frequence GPU runs at. this would be optimized when we implement
GPU DVFS with devfreq.
Change-Id: Ia25f0a67577fbfe248a25e4d913dc5f14fa40f0d
Signed-off-by: chenzhen <chenzhen@rock-chips.com>
Add the rk3399-evb-cros.dtsi for cros private.
Also, we should add the rev3 dts to support it.
Change-Id: Ie68d4352474c7ea02c188e2c2176244709ac1b48
Signed-off-by: Caesar Wang <wxt@rock-chips.com>
This patch trys to sync the rockchip_defconfig for cros.
Change-Id: Ieeda1e41f05f33ffaa708c9825901553a759b17b
Signed-off-by: Caesar Wang <wxt@rock-chips.com>
Enable both OTG1 PHY and OTG2 USB2 PHY for rk3399 board.
With this patch, we can support usb battery charger detect
and hold wake lock in OTG peripheral mode.
Change-Id: Icae1924d8a2427c297f28032588f178532acc560
Signed-off-by: Wu Liang feng <wulf@rock-chips.com>
DRM dw_hdmi audio driver is based on common hdmi-codec driver, and bind
with i2s controller through simple-audio-card.
Change-Id: I2d9d5941b8e7c1f256e505338f43869584772e79
Signed-off-by: Yakir Yang <ykk@rock-chips.com>
This patch prevents OTG0 and OTG1 PHY from entering suspend mode.
Because if PHY enter suspend, it will cause DWC3 controller work
abnormally now. We can revert it if fusb302 driver is merged.
Change-Id: I74c3ee5d3e1b925e8dc758bdc6d67372df421b98
Signed-off-by: Wu Liang feng <wulf@rock-chips.com>
This patch add USB2 PHY1 OTG port configurations for rk3399,
it support PHY1 suspend and bvalid detect, but not support
usb battery charger detect.
Change-Id: I7a6aaf484d6ad2ad097a7d9679a56aa545f217c8
Signed-off-by: Wu Liang feng <wulf@rock-chips.com>
RK3399 SoC USB2 PHY1 comprises with one host-port and
one otg-port, now we support PHY1 otg-port.
Change-Id: I8e7fd53ce6f1552172044ad2adc3f19e923d1bcd
Signed-off-by: Wu Liang feng <wulf@rock-chips.com>
Should do vop_cfg_done to let windows disable take effect
Change-Id: Ib2966d8825a195696a963de7bc1d9665e78e5389
Signed-off-by: Mark Yao <mark.yao@rock-chips.com>
The series of vop is:
IP version chipname
3.1 rk3288
3.2 rk3368
3.4 rk3366
3.5 rk3399 big
3.6 rk3399 lit
3.7 rk322x
The IP version is from VERSION_INFO register
major version: used for IP structure, Vop full framework is 3,
vop little framework is 2.
minor version: on same structure, newer design vop will bigger then
old one.
Change-Id: I032cb3d74cd01440274d3efeefa747e6028c1689
Signed-off-by: Mark Yao <mark.yao@rock-chips.com>
If cmd is empty in get_reboot_mode_magic, we should return normal magic.
Change-Id: I10931adc49e33f72ae73d9471159f82cc02ff0c0
Signed-off-by: Huang, Tao <huangtao@rock-chips.com>
Add the interrupts cells value for 4, and the 4th cell is zero.
Due to the doc[0] said:" the system requires describing PPI affinity,
then the value must be at least 4"
The 4th cell is a phandle to a node describing a set of CPUs this
interrupt is affine to. The interrupt must be a PPI, and the node
pointed must be a subnode of the "ppi-partitions" subnode. For
interrupt types other than PPI or PPIs that are not partitionned,
this cell must be zero. See the "ppi-partitions" node description
below.
[0]:
Documentation/devicetree/bindings/interrupt-controller/arm,gic-v3.txt
Change-Id: I80d459b746aea40027a7eacfcc7aa764a57fdc9f
Acked-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Caesar Wang <wxt@rock-chips.com>
(am https://patchwork.kernel.org/patch/9215659/)
(Note: fixes some no sync upstream node)
On a big-little system, PMUs can be wired to CPUs using per CPU
interrups (PPI). In this case, it is important to make sure that
the enable/disable do happen on the right set of CPUs.
So instead of relying on the interrupt-affinity property, we can
use the actual percpu affinity that DT exposes as part of the
interrupt specifier. The DT binding is also updated to reflect
the fact that the interrupt-affinity property shouldn't be used
in that case.
Change-Id: I4a48e116cfa84d74985f44ed30d6e664ce3cfa5f
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Caesar Wang <wxt@rock-chips.com>
(am from https://patchwork.kernel.org/patch/9216445/)
The usb2 phy utmi bvalid status is invalid for ES1 evb1/evb2
board, so check vbus status by utmi avalid status.
Change-Id: Iae369183cd15034eb35818c63988150f3aad6374
Signed-off-by: Wu Liang feng <wulf@rock-chips.com>
Rockchip USB2 phy provides utmi_avalid and utmi_bvalid for
user to check UTMI vbus status. Generally, both of them can
reflect the vbus status correctly, and the utmi_bvalid has
higher sensitivity, so we select the utmi_bvalid to get vbus
status by default.
But some special SoCs may not provide utmi_bvalid, so we
need to select utmi_avalid in this case.
Change-Id: I0d47c2237f852cb67ebd82fe2673b2bd2e6ccce6
Signed-off-by: Wu Liang feng <wulf@rock-chips.com>
This adds support for rk3288-miniarm board,
Rockchip RK3288 based development boards.
Change-Id: I3db8f16ae7fa5e18675eefb29684f6ef07434683
Signed-off-by: Nickey Yang <nickey.yang@rock-chips.com>
Big cores' power consumption and gpu's are greatly reduced, ipa parameters
are ajusted accordingly.
Change-Id: Ibfdae1856c2f1c2cf80a0a2f963ec878053c6ef0
Signed-off-by: Rocky Hao <rocky.hao@rock-chips.com>
Some evb3 need 1v for 800M.
We remove 700M currently since havn't a good opinion of it.
Change-Id: I7083857f5bb8a09efe0369a6bdd49e28c67da8b7
Signed-off-by: Jianqun Xu <jay.xu@rock-chips.com>
We found that the suspend process was blocked when it run into
ehci/ohci module due to clk-480m of usb2-phy was disabled.
The root cause is that usb2-phy suspended earlier than ehci/ohci
(usb2-phy will be auto suspended if no devices plug-in). and the
clk-480m provided by it was diabled if no module used. However,
some suspend process related ehci/ohci are base on this clock,
so we should refer it into ehci/ohci driver to prevent this case.
Change-Id: Ic5e70a4234382e5cd1e1690e5174891e89360741
Signed-off-by: Frank Wang <frank.wang@rock-chips.com>
Update version to v7.0, main features:
1. new algorithm which is independent of time calculation in almost case,
2. remove charger detect to driver: rk818-charger.c;
3. save algorithm calculation rest value for next system power on calculation;
4. recognize system halt and reset dsoc as rsoc;
5. support hardware sample resistor selected as 10mR or 20mR;
6. optimize zero algorithm to make discharge figure more smooth;
7. fix some logic bugs.
Change-Id: I789d070693ac16102ecbe813d878a2a3c256c030
Signed-off-by: Jianhong Chen <chenjh@rock-chips.com>
Make dts files in order as follows:
rk3399.dtsi
rk3399-box.dtsi
rk3399-box-rev1.dts
rk3399-box-rev2.dts
...
Change-Id: I93d1fb4380d0c84a14fc3476b7435b1abe4989d2
Signed-off-by: Jianqun Xu <jay.xu@rock-chips.com>
