PD#TV-7335
Problem:
add nicam detection when current signal fm-mono change to nicam.
Solution:
1.add nicam detection when current signal fm-mono change to nicam.
Verify:
Verified by x301
Change-Id: If2e35d018d2df803c5458cc93974352b06e90a11
Signed-off-by: nengwen.chen <nengwen.chen@amlogic.com>
PD#SWPL-10876
Problem:
add del 2ns function
Solution:
add del 2ns function
Verify:
verify on u200 board
Change-Id: I949a1d85e41d0b0e03708243f9559f8de63b0e54
Signed-off-by: Zhuo Wang <zhuo.wang@amlogic.com>
PD#SWPL-10716
Problem:
when audio signal change from -30dB to 0dB, audio suddenly output power
is higher than 150% instantaneous maximum power
Solution:
add clip thd control interface
Verify:
verified on TL1-X301
Change-Id: Id16ba3c220a22b473eaa1e3ff87bf5dde2a83227
Signed-off-by: Zhe Wang <Zhe.Wang@amlogic.com>
PD#SWPL-10836
Problem:
read sensor time too long
Solution:
read sensor once
Verify:
verified on t1 t962x2 x301
Change-Id: Iddf4c903ba8a3836666943adb5c02c5d287728df
Signed-off-by: Huan Biao <huan.biao@amlogic.com>
PD#OTT-4743
Problem:
string withou null-termination
Solution:
ensure there is a null-termination in the string
Verify:
p212
Change-Id: Icfb6e39741b5d26611bbd316d6c423b8d4715105
Signed-off-by: apollo.ling <apollo.ling@amlogic.com>
PD#TV-7280
Problem:
rgb screen pattern white balance data is a little high
Solution:
optimize convert coef
Verify:
verify on TL1
Change-Id: Iae1e8134d1a48fe0bbf206dd9b148c264951da2a
Signed-off-by: MingLiang Dong <mingliang.dong@amlogic.com>
PD#SWPL-10831
Problem:
sawtooth in the lower patr of AV video
Solution:
adjust motion num condition
Verify:
marconi
Change-Id: Id42f1cb2d3f702e04cd640dbc99c4f7a97447faf
Signed-off-by: Wenfeng Guo <wenfeng.guo@amlogic.com>
PD#TV-7517
Problem:
hdmi hdr color deepth mode is auto, if input
is 8bit mode, output is 8bit mode
Solution:
when is hdr mode, force set 10bit mode to frame
buffer.
Verify:
tl1
Change-Id: If958f687e3923389277880e19d47f933421a8292
Signed-off-by: Yong Qin <yong.qin@amlogic.com>
PD#SWPL-10860
Problem:
s912 need to support adb.
Solution:
update dts
Verify:
verify by hertz
Change-Id: I085a0442d229d13d02b963c948d390920aea3dd0
Signed-off-by: Luan Yuan <luan.yuan@amlogic.com>
PD#SWPL-7864
Problem:
the red and blue areas of the fourth frequency band
are missing color serious
Solution:
debug by VLSI(yanling), add cue init setting;
Verify:
S905X3
Change-Id: Idc8e5e811e0f2a8195cc70ebb8df0af8f080b174
Signed-off-by: Jihong Sui <jihong.sui@amlogic.com>
PD#SWPL-9815
Problem:
One T312-T962X3 project need use the dirspi_xxx interfaces to
communicate with a extern mcu(spi device).
Solution:
config dts to use spicc amlogic-driver to support dirspi_xxx
Verify:
T312
Change-Id: Icad0e516b5d694b86350fec1e9322170e84d9c8f
Signed-off-by: Sunny Luo <sunny.luo@amlogic.com>
PD#OTT-4875
Problem:
missing return value check for kstrtoint
Solution:
add this check for kstrtoint
Verify:
verified on g12b-w400
Change-Id: I0515b4b445c78d950201df6547e83578cac32d16
Signed-off-by: Jian Cao <jian.cao@amlogic.com>
PD#TV-7022
Problem:
A null pointer causes panic.
Solution:
Add a judgment on the null pointer in the
amlvideo2_stop_thread function.
Verify:
on x301
Change-Id: Ic2cb9476fa97e27fe8b1160d74330d1ba7bc93a8
Signed-off-by: renjiang.han <renjiang.han@amlogic.com>
PD#SWPL-10167
Problem:
Apk drop several frames at beginning, but
dolby frames are not consumed, decoder has
no idle buffers.
Solution:
Ignore drop for dual layer dolby video
Verify:
verified on u212
Change-Id: I732d82e71c190c62a14c05accea44b4c55d04239
Signed-off-by: yao liu <yao.liu@amlogic.com>
PD#SWPL-5522
Problem:
S912 display S912 Android P support for osd
Solution:
add memory-region for gxm logo
Verify:
verified on gxm-q201
Change-Id: If4efec47f939a944530ef1dc0f7a3b8abf245a47
Signed-off-by: Jian Cao <jian.cao@amlogic.com>
PD#SWPL-10079
Problem:
use-after-free issue
driver_data is relesed on shutdown, it is used in kthread_di
this thread is not stopped, will return if driver_data is NULL
Solution:
set driver_data to NULL on shutdown release
Verify:
verified on TL1-X301
Change-Id: I64fd1e39e6cedcc801d4d451eb1a56ca2ccc3364
Signed-off-by: Jian Cao <jian.cao@amlogic.com>
PD# SWPL-9328
Problem:
memory is 1G,the sound was intermittent
when hdmi play music of non-48k sampling rate
Solution:
set resample module src
Verify:
test ok using x301
Change-Id: I2245161a58a014b9dfbf0324799f5e8bd4acd184
Signed-off-by: nengqin.zhu <nengqin.zhu@amlogic.com>
PD#SWPL-9589
Problem:
shift preset length of vid pll div is wrong
Solution:
modify shift preset length of vid pll div
Verify:
gxl-p281
Change-Id: Iac897db9d9a36e26df40e8c1ed303e02bddeb92f
Signed-off-by: Hang Cheng <hang.cheng@amlogic.com>
PD#TV-7043
Problem:
too much kernel log cause system hang up
Solution:
protect the log by debug flag
Verify:
verify by marconi
Change-Id: I7cb2cdf5e3bee92e136d948a974d9a1240609867
Signed-off-by: Lei Qian <lei.qian@amlogic.com>
PD#SWPL-9659
Problem:
some file not have License
Solution:
delete unuse file and add License
Verify:
verify by einstein
Change-Id: Ia0a4eb82bc100129f71c7c88d0a403b482449314
Signed-off-by: Rongjun Chen <rongjun.chen@amlogic.com>
PD#SWPL-6068
Problem:
ceca isr cost long time, and delayed vdin vs.
Solution:
move function to tasklet
Verify:
txlx
Change-Id: I861dd2ba145a64a88ad126abc00944d2358914c8
Signed-off-by: Yong Qin <yong.qin@amlogic.com>
PD#TV-7161
Problem:
dead lock between flush work and ipa
Solution:
fix dead lock between flush work and ipa
Verify:
TL1
Change-Id: I479869601c0816bbaeaa693a26bf606b6a168da0
Signed-off-by: Jianxin Pan <jianxin.pan@amlogic.com>
PD#SWPL-9636
Problem:
upper layer get signal type is too late,cause screen flash
Solution:
report signal type to upper layer directly in vdin module
Verify:
verified by t962x2_x301
Change-Id: I08f7754f20ba8b6b00a34387dcaf4aee7fdc2185
Signed-off-by: zhiwei.yuan <zhiwei.yuan@amlogic.com>
PD#SWPL-10180
Problem:
can't enable clk tuning
Solution:
add control interface in dts to enable clk tuning
and start clk before codec init for s905x2
Verify:
verify on franklin
Change-Id: Icc97b04923bcc317b8259449ba068d1eddef0854
Signed-off-by: Cheng Tong <cheng.tong@amlogic.com>
PD#SWPL-9776
Problem:
let dtb make comptabile with below ways:
make ARCH=arm meson-g12a-u200.dtb
make ARCH=arm amlogic/meson-g12a-u200.dtb
Solution:
modify makefile
Verify:
w400
Change-Id: Ic2bb196f67c632cdc9acae61645fe3dd45c7bb1a
Signed-off-by: Hanjie Lin <hanjie.lin@amlogic.com>
PD#TV-6827
Problem:
when input source is 4k and output axis's height <228, screen blank
Solution:
1. need set echo 20 250 > /sys/class/video/black_threshold,
when video scaler can't process, disable video
2. black_threshold valid when vscale_skip_count=8 && hscale_skip_count=1
Verify:
t972
Change-Id: I4459c9989adf4c8acb6061756393384cee6f438f
Signed-off-by: Pengcheng Chen <pengcheng.chen@amlogic.com>
PD#SWPL-10128
Problem:
dv certification uncorrect
Solution:
need set_afbcd enable for dv certification
Verify:
Verified on sm1
Change-Id: I141769ee1ae4b1cf224513c62b84414d0638c6f5
Signed-off-by: Pengcheng Chen <pengcheng.chen@amlogic.com>
PD#SWPL-10128
Problem:
graphic max 100 is too low
Solution:
need set graphic max to 380
Verify:
Verified on sm1
Change-Id: Ibbea07439a99500bdcc051aa9ed7ea8d1ee00fc8
Signed-off-by: yao liu <yao.liu@amlogic.com>
PD#SWPL-10287
Problem:
ipa parameter optimization for tm2
Solution:
change the dyn_coeff of cpufreq and gpufreq, and the sustainable power
Verify:
ab311 pass
Change-Id: Iec472fef8cbd51486a697720ec3015a2e49f37b6
Signed-off-by: zhenxin.pu <zhenxin.pu@amlogic.com>
PD#SWPL-10134
Problem:
endless loop in wakeup source show
Solution:
fix endless loop in wakeup source show
Verify:
TL1
Change-Id: If2318e31388b4a656cf8d99058f8aeaf76ff97a0
Signed-off-by: Jianxin Pan <jianxin.pan@amlogic.com>
PD#TV-5977
Problem:
customer platform, when LC is on, test pattern abnormal
Solution:
there is two frame delay for LC histogram, do not enable LC precess
before it is ready
Verify:
TL1
Change-Id: I78febb9f978dba44faff74677d84075fdf1fd8c7
Signed-off-by: Xihai Zhu <xihai.zhu@amlogic.com>
PD#SWPL-10391
Problem:
g12b revA and revB need one code for two parameter
Solution:
dts set g12b revB parameter
read chipversion,if g12b revA, change the parameter by default value
Verify:
verify on g12b w200 board,revA and revB
Change-Id: I9cc4cd6c370207dce22dd0c7df51a6c71397e235
Signed-off-by: Zhuo Wang <zhuo.wang@amlogic.com>
PD#OTT-4656
Problem:
When handling the set attribute IOCTL EFUSE_INFO_GET the driver
makes a call to efuse_getinfo(line 177) passing it a potentially
non-null terminated string. efuse_getinfo() function then uses
this potentially non-null terminated string in strcmp (line 99).
the method efuse_getinfo does not cater to non-null terminated
strings and thus can likely be made to overrun the "item" string
beyond any printable ascii data.
Further more, if attackers can control the item value well enough,
the function efuse_getinfo can be used to potentially disclose
values in kernel memory i.e. by checking the results of lots of
strcmp calls on items values, essentially acting as an oracle for
memory values surrounding the efusekey_info[n].keyname variable in
stack memory.
Solution:
force a null terminator for the keyname argument before comparing
it to kernel memory
Verify:
U200
Change-Id: I851dd7045d0a9e7855e9899c4745eac475cb9233
Signed-off-by: Jiamin Ma <jiamin.ma@amlogic.com>
PD#SWPL-9720
Problem:
difference window area between chips
Solution:
add interface to custom
Verify:
verify on g12a u200 board
Change-Id: I589c890e36961f533bffae557337b24a09f1bf41
Signed-off-by: Zhuo Wang <zhuo.wang@amlogic.com>
PD#SWPL-10306
Problem:
omxpts is not update print too many
Solution:
move a print info to debug control, the condition to check
whether omxpts is not set for while is not accurate
Verify:
verify by mainline
Change-Id: I387cc6aee718182a8ff99838e9741443236dd1f9
Signed-off-by: shuanglong.wang <shuanglong.wang@amlogic.com>
PD#SWPL-5522
Problem:
S912 display S912 Android P support for osd
Solution:
modify VIU_MISC_CTRL1 for gxm
Verify:
verified on gxm-q201
Change-Id: I2bccfb3fe03864e55d41ab4f9ecf4db68d9dfbea
Signed-off-by: Jian Cao <jian.cao@amlogic.com>
