PD#170723: cec: support otp and enter source
1.get wakeup reason from stick register
2.add get wakeup reason from wakeup
Change-Id: Idb0e56980569d3092fde971c0dcb73a4684bff0b
Signed-off-by: Yong Qin <yong.qin@amlogic.com>
PD#171408: cec: auto power down function fail
1.reason: set auto pw down, disabled cec function
Change-Id: I554b085345bc144e6ff4166aae8c2d9d6620c524
Signed-off-by: Yong Qin <yong.qin@amlogic.com>
PD#168362: P211: emmc: upgrade gpt or ept based on priority
Change-Id: I0e7ea483ac5fc0a59ee24ae21d2e40e1c5d32465
Signed-off-by: Ruixuan Li <ruixuan.li@amlogic.com>
PD#171440: di: add mif enable after reset for g12
Change-Id: I61e3b7e96b88b8875d7de4948fa627c4882ab810
Signed-off-by: frank zhao <frank.zhao@amlogic.com>
PD#170791: by default, it is SCHED_NORMAL.
1a7a93bd33%5E!/
AOSP suggested to use SCHED_FIFO , 2, in Qcom platform.
there are another 2 sleeping point for osd_toggle_buffer.
need to adjust it still.
Change-Id: Ic94a4e1cfee218fc95b53358d2c2e72bbde7bfdd
Signed-off-by: Jiyu Yang <Jiyu.Yang@amlogic.com>
PD#169652: board: use do_div for divid operation
when dividend is 64bit number, divid operation should
use do_div, otherwise link stage will fail for 32bit
system.
Change-Id: Iff2fdc328e364cec6486ab64e2e0f630ccb8534d
Signed-off-by: Ao Xu <ao.xu@amlogic.com>
PD#171081: backlight: add step power on support
default disable with bl_step_on_flag = 0.
change bl_step_on_flag to 1 to enable step_on function:
echo 1 >/sys/class/aml_bl/step_on
the brightness will be level_default first,
then come to the system brightness value.
Change-Id: I47ae56c0f814b2e0e5989b71f151ed84ffee795b
Signed-off-by: Evoke Zhang <evoke.zhang@amlogic.com>
Commit 8844618d8a: "ext4: only look at the bg_flags field if it is
valid" will complain if block group zero does not have the
EXT4_BG_INODE_ZEROED flag set. Unfortunately, this is not correct,
since a freshly created file system has this flag cleared. It gets
almost immediately after the file system is mounted read-write --- but
the following somewhat unlikely sequence will end up triggering a
false positive report of a corrupted file system:
mkfs.ext4 /dev/vdc
mount -o ro /dev/vdc /vdc
mount -o remount,rw /dev/vdc
Instead, when initializing the inode table for block group zero, test
to make sure that itable_unused count is not too large, since that is
the case that will result in some or all of the reserved inodes
getting cleared.
This fixes the failures reported by Eric Whiteney when running
generic/230 and generic/231 in the the nojournal test case.
Change-Id: I3967036c1d84cc69798b7c948420735c623c9ae8
Fixes: 8844618d8a ("ext4: only look at the bg_flags field if it is valid")
Reported-by: Eric Whitney <enwlinux@gmail.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
PD#169652: board: fix ioremap call fail issue
for arm 32, ioremap will check if page is mapped
Change-Id: Icb5dda1b9de06d32e47c82a6bc45b62873332487
Signed-off-by: Ao Xu <ao.xu@amlogic.com>
PD#169652: board: fix stack overflow issue
it is better to use kmalloc to alloc buffer
instead of in stack buffer.
Change-Id: I6825d8acff19248f2f6c789ed2218af42ca4ffd3
Signed-off-by: Ao Xu <ao.xu@amlogic.com>
PD#170794: cec: add port info for mix mode
1.add port info for output and input mix mode
2.port number= input number + output number
3.r321 dts add 1 output number for mix mode
Change-Id: I17692f5fb4526b4f95474f5ea36c11213034724f
Signed-off-by: Yong Qin <yong.qin@amlogic.com>
Up until recently sync_file were create to export a single dma-fence to
userspace, and so we could canabalise a bit insie dma-fence to mark
whether or not we had enable polling for the sync_file itself. However,
with the advent of syncobj, we do allow userspace to create multiple
sync_files for a single dma-fence. (Similarly, that the sw-sync
validation framework also started returning multiple sync-files wrapping
a single dma-fence for a syncpt also triggering the problem.)
This patch reverts my suggestion in commit e241655373
("dma-buf/sync_file: only enable fence signalling on poll()") to use a
single bit in the shared dma-fence and restores the sync_file->flags for
tracking the bits individually.
Reported-by: Gustavo Padovan <gustavo.padovan@collabora.com>
Fixes: f1e8c67123 ("dma-buf/sw-sync: Use an rbtree to sort fences in the timeline")
Fixes: e9083420bb ("drm: introduce sync objects (v4)")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170728212951.7818-1-chris@chris-wilson.co.uk
[astrachan: rediffed against changed context lines in 4.9]
Bug: 79383895
PD#170298 [1/3]
Change-Id: I70d1f19796c6cb33cd4c19e40276d7298aa4ba5d
Signed-off-by: Alistair Strachan <astrachan@google.com>
PD#170502: dts: update the gpio key node for atom and sei210
Change-Id: Ib92167c36c2a756a784494da5dbe73a13c63dff0
Signed-off-by: Yingyuan Zhu <yingyuan.zhu@amlogic.com>
Signed-off-by: Victor Wan <victor.wan@amlogic.com>
Conflicts:
drivers/md/dm-bufio.c
drivers/media/dvb-core/dvb_frontend.c
drivers/usb/dwc3/core.c
drivers/usb/gadget/function/f_fs.c
PD#170980: di: optimize di pre mif config
1.add protect for di pre reset
2.add pre de done check when unreg
3.merge afbc hold line from alishan code
4.optimize pre mif enable sequence
Change-Id: I18851ad644aaee7c6c1d76c69f41a91f9599a36d
Signed-off-by: Dezhi Kong <dezhi.kong@amlogic.com>
PD#170794: cec: add the port info and connect status for audio system
Change-Id: I433788d4f5fcbb3164f894ebc0f6827dd47b0633
Signed-off-by: hongmin hua <hongmin.hua@amlogic.com>
Signed-off-by: Xindong Xu <xindong.xu@amlogic.com>
PD#166821: decrease DEFAULT_TVP_SIZE_FOR_4K and reserved-memory
DEFAULT_TVP_SIZE_FOR_4K to 192M
codec_mm_cma to 208M
ion_reserved to 78M
Change-Id: I2fd38f40c242ef531f8cf2226822bed4b0250a4f
Signed-off-by: Wencai You <wencai.you@amlogic.com>
PD#170749: vdin: add vdin output color depth selection
when vdin receive 4K && 50/60hz && 10bit data,
we can select vdin output color depth 8bit or 10bit from dts
Change-Id: I9c030b4769927dbf53880fad6c80707d7b282e86
Signed-off-by: xuhua zhang <xuhua.zhang@amlogic.com>
PD#170301: txl: fix di abnormal when inverted screen
Change-Id: I2777e0092413115da5f4fdd4975c721c3f086ee3
Signed-off-by: Jihong Sui <jihong.sui@amlogic.com>
PD#168366: tvin: tvafe: fix black side on atv snow
Change-Id: I3e40ff3d6e9dbee5ba4db4f720ae3c2d7aebc690
Signed-off-by: Nian Jing <nian.jing@amlogic.com>
PD#170812: gxbb_pm: get system suspend level fail,
need to add cpu-idle-states nodes
Change-Id: I38128bcc6ef84cb1af0dbba556e65d47928182a1
Signed-off-by: yuehu mi <yuehu.mi@amlogic.com>
