This pull request contains Broadcom ARM64-based SoCs Device Tree changes
for 5.17, please pull the following:
- Rafal adds and documents the Netgear RAXE500 Wireless router based on
the BCM4908 SoC.
* tag 'arm-soc/for-5.17/devicetree-arm64' of https://github.com/Broadcom/stblinux:
arm64: dts: broadcom: bcm4908: add DT for Netgear RAXE500
dt-bindings: arm: bcm: document Netgear RAXE500 binding
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
This pull request contains Broadcom ARM-based SocS Device Tree changes
for v5.17, please pull the following:
- Matthew enables the QCA8337 switch of the Merak MX65 to have the
appropriate PLL properties for it to be enabled and set the SGMII
transmit clock to falling edge.
- Arinc removes unnecessary properties of the GPIO keyboard Device Tree
node, adds the external Realtek RTM8365MB switch on the Ausus RT-AC88U,
including fixing the RX delay on the Realtek switch side and enabling
flow control on the Broadcom internal switch port connecting to the
Realtek switch.
- Christian updates the Meraki MR32 Device Tree node to make use of the
hardware I2C controller instead of bitbanging
- Rafal updates the BCM5310X Device Tree files to have the CRU node not
generate warnings, updates the USB 2.0 PHY to use the non-deprecated
binding
- Uwe adds GPIO offset to the gpio names properties for readability
- Stefan updates the BCM2835 VCHIQ Device Tree binding to YAML
- Florian fixes the iProc PCIe Device Tree nodes in Cygnus, Hurricane 2
and Northstar Plus to be compliant with the iProc PCIe YAML binding
(merged in RobH's tree) as well as the SATA controller node unit name.
* tag 'arm-soc/for-5.17/devicetree' of https://github.com/Broadcom/stblinux:
ARM: dts: BCM5301X: correct RX delay and enable flow control on Asus RT-AC88U
ARM: dts: NSP: Rename SATA unit name
ARM: dts: NSP: Fixed iProc PCIe MSI sub-node
ARM: dts: HR2: Fixed iProc PCIe MSI sub-node
ARM: dts: Cygnus: Update PCIe PHY node unit name(s)
ARM: dts: Cygnus: Fixed iProc PCIe controller properties
dt-bindings: soc: bcm: Convert brcm,bcm2835-vchiq to json-schema
ARM: dts: bcm2711-rpi-4-b: Add gpio offsets to line name array
ARM: dts: BCM5301X: use non-deprecated USB 2.0 PHY binding
ARM: dts: BCM5301X: update CRU block description
ARM: BCM53016: MR32: convert to Broadcom iProc I2C Driver
ARM: dts: BCM5301X: define RTL8365MB switch on Asus RT-AC88U
ARM: dts: BCM5301X: remove unnecessary address & size cells from Asus RT-AC88U
ARM: dts: NSP: MX65: add qca8k falling-edge, PLL properties
Qualcomm ARM64 DeviceTree updates for v5.17
This introduces initial support for the brand new Snapdragon 8 Gen 1,
aka SM8450 platform, with SMP, CPUfreq, cluster idling, low speed buses,
TLMM pinctrl, SMMU, regulators, clocks, power-domains, UFS storage and
USB currently supported.
SDM845 adds new support for Sony Xperia XZ2, XZ2C and XZ3. The Lenovo
Yoga C630 gains a few audio related fixes. The PMIC's VADC channels are
described as thermal zones. OnePlus devices gains msm-id and board-id,
to facilitate a single firmware image for the multiple devices.
On SM8350 the Sony Xperia 1 III and 5 III, as well as initial
description of Microsoft's Surface Duo 2 are introduced. On the
platform side, LLCC, QUP nodes, redistributor stride and all the
low-speed QUPs are added
MSM8996 gained various regulator fixes, and adsp firmware name to
faciliate pushing firmware to linux-firmware. Xiaomi Mi Note 2 gained
touchkey controller definition.
On SDM660 the Xiaomi Redmi Note 7 gained power and volume keys, RPM and
regulator definitions, USB, eMMC and SD-card and a simple-framebuffer
description.
MSM8916 has the mmc aliases corrected, to stop the storage devices to
move around and the RPM sleep stats memory is described. Support for the
Samsung J5 2015 smartphone is introduced.
SM6350 validation errors are fixed and and description of the audio,
compute and modem remoteprocs are added.
A couple new revisions of the SC7180 based Google devices are added.
The SC7280 platform gains venus and a few fixes. The CRD development
device is introduced, with the EC, touchscreen and touchpad.
On SM8250 CPU opp-tables, for scaling L3 cache and DDR frequency based
on CPU frequency, are added. As is TX, RX macros and SoundWire blocks
and used to enable audio on the SM8350 MTP.
* tag 'qcom-arm64-for-5.17-1' of git://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux: (92 commits)
arm64: dts: qcom: sm6125: Avoid using missing SM6125_VDDCX
arm64: dts: qcom: sm8450-qrd: Enable USB nodes
arm64: dts: qcom: sm8450: Add usb nodes
arm64: dts: qcom: sm8450: add i2c13 and i2c14 device nodes
arm64: dts: qcom: sm8450: add cpufreq support
arm64: dts: qcom: sm8450: Add rpmhpd node
arm64: dts: qcom: sm8450-qrd: enable ufs nodes
arm64: dts: qcom: sm8450: add ufs nodes
arm64: dts: qcom: sm8450-qrd: Add rpmh regulator nodes
arm64: dts: qcom: Add base SM8450 QRD DTS
arm64: dts: qcom: sm8450: add smmu nodes
arm64: dts: qcom: sm8450: Add reserved memory nodes
arm64: dts: qcom: sm8450: Add tlmm nodes
arm64: dts: qcom: Add base SM8450 DTSI
arm64: dts: qcom: ipq6018: Fix gpio-ranges property
arm64: dts: qcom: sdm845: add QFPROM chipset specific compatible
arm64: dts: qcom: sdm845: mtp: Add vadc channels and thermal zones
arm64: dts: qcom: pm8998: Add ADC Thermal Monitor node
arm64: qcom: dts: drop legacy property #stream-id-cells
Revert "arm64: dts: qcom: sm8350: Specify clock-frequency for arch timer"
...
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
The SM6125_VDDCX constant is introduced through a separate branch and is
not available in the dts branch. Temporarily replace the constant with
it's value to avoid the build breakage.
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Qualcomm DeviceTree updates for v5.17
To SDX55 this introduces the description of the IPA, PCIe PHY and PCIe
endpoint controller, as well as enables these for the FN960 device.
The SDX65 5G platform is introduced, currently with definitions
necessary to boot to a shell.
The undocumented property "input-name" is dropped throughout the dts
files, dwc3 nodes throughout gains more specific compatibles and lastly
building of the Dragonboard 410c DTB on ARM32 is enabled, in addition to
its normal operation in 64-bit mode.
* tag 'qcom-dts-for-5.17' of git://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux:
ARM: dts: qcom: Drop input-name property
ARM: dts: qcom: sdx65: Add pincontrol node
ARM: dts: qcom: Add SDX65 platform and MTP board support
dt-bindings: arm: qcom: Document SDX65 platform and boards
dt-bindings: clock: Add SDX65 GCC clock bindings
ARM: dts: qcom: Build apq8016-sbc/DragonBoard 410c DTB on ARM32
ARM: dts: qcom: sdx55-t55: Enable IPA
ARM: dts: qcom: sdx55-fn980: Enable IPA
ARM: dts: qcom: sdx55-fn980: Enable PCIe EP
ARM: dts: qcom: sdx55: Add support for PCIe EP
ARM: dts: qcom: sdx55-fn980: Enable PCIE0 PHY
ARM: dts: qcom: sdx55: Add support for PCIe PHY
ARM: dts: qcom: update USB nodes with new platform specific compatible
Link: https://lore.kernel.org/r/20211221042154.3621955-1-bjorn.andersson@linaro.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
ARM: tegra: Changes for v5.17-rc1
A large part of this is cleanups to existing device trees in order to
improve validation of the device trees using the dt-schema tooling.
This also contains a set of new device trees for various boards that
have been contributed by community members as well as fixes to existing
devices.
* tag 'tegra-for-5.17-arm-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux: (55 commits)
ARM: tegra: Add host1x hotflush reset on Tegra124
ARM: tegra: Add memory client hotflush resets on Tegra114
ARM: tegra: Add back gpio-ranges properties
ARM: tegra: paz00: Enable S/PDIF and HDMI audio
ARM: tegra: acer-a500: Enable S/PDIF and HDMI audio
ARM: tegra: Add HDMI audio graph to Tegra20 device-tree
ARM: tegra: Add S/PDIF node to Tegra20 device-tree
ARM: tegra20/30: Disable unused host1x hardware
ARM: tegra: Add Memory Client resets to Tegra30 GR2D, GR3D and Host1x
ARM: tegra: Add Memory Client resets to Tegra20 GR2D, GR3D and Host1x
ARM: tegra: Add OPP tables and power domains to Tegra30 device-trees
ARM: tegra: Add OPP tables and power domains to Tegra20 device-trees
ARM: tegra: Add 500 MHz entry to Tegra30 memory OPP table
ARM: tegra: Enable video decoder on Tegra114
ARM: tegra: nexus7: Use common LVDS display device-tree
ARM: tegra: Add CPU thermal zones to Nyan device-tree
ARM: tegra: Enable CPU DFLL on Nyan
ARM: tegra: Enable HDMI CEC on Nyan
ARM: tegra: Add usb-role-switch property to USB OTG ports
ARM: tegra: Add device-tree for 1080p version of Nyan Big
...
Link: https://lore.kernel.org/r/20211217162253.1801077-5-thierry.reding@gmail.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Samsung DTS ARM64 changes for v5.17
1. Add bindings for: Exynos USI, Samsung Galaxy A8 (2018) board, WinLink
E850-96 board and WinLink vendor prefix.
2. Add pinctrl definitions used for Exynos850.
3. Minor fixes and improvements.
4. Convert serial on ExynosAutov9 to new hierarchy where serial is part
of USI node.
* tag 'samsung-dt64-5.17' of git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux:
dt-bindings: pinctrl: samsung: Add pin drive definitions for Exynos850
dt-bindings: arm: samsung: Document E850-96 board binding
dt-bindings: Add vendor prefix for WinLink
dt-bindings: arm: samsung: document jackpotlte board binding
dt-bindings: soc: samsung: Fix I2C clocks order in USI binding example
arm64: dts: exynos: convert serial_0 to USI on ExynosAutov9
dt-bindings: soc: samsung: Add Exynos USI bindings
arm64: dts: exynos: Rename hsi2c nodes to i2c for Exynos5433 and Exynos7
Link: https://lore.kernel.org/r/20211220115530.30961-2-krzysztof.kozlowski@canonical.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Samsung DTS ARM changes for v5.17
1. Fix Bluetooth GPIO on GT-I9100.
2. Minor improvements and dtschema fixes.
* tag 'samsung-dt-5.17' of git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux:
ARM: dts: exynos: Rename hsi2c nodes to i2c for Exynos5260
ARM: dts: exynos: Use interrupt for BCM4330 host wakeup in I9100
ARM: dts: exynos: Fix BCM4330 Bluetooth reset polarity in I9100
Link: https://lore.kernel.org/r/20211220115530.30961-1-krzysztof.kozlowski@canonical.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
i.MX arm64 device tree change for 5.17:
- New SoC support: i.MX8 ULP.
- New board support: i.MX8MM/MN based TQMa8Mx boards, iMX8MN BSH SMM S2,
i.MX8 ULP EVK.
- A series from Adam Ford to enable Camera and USB support for
imx8mm-beacon device.
- Add overlays for various serdes protocols on LS1028A QDS board using
different PHY cards.
- A series from Biwen Li to update LS1028A devices around RTC, flextimer
and PWM support.
- A series from Joakim Zhang to update ENET/FEC suppport on i.MX8M
devices.
- A couple of changes from Lucas Stach to update nitrogen8-som Ethernet
PHY and I2C1 pad configuration.
- A series from Martin Kepplinger to split out a shared imx8mq-librem5-r3
dtsi for Librem5 devices.
- Add cache descriptions for i.MX8 SoCs.
- A series from Vladimir Oltean to update ls1028a-rdb device tree in
order to share the DTS between Linux and U-Boot.
- Random device addtion to various i.MX8 and LX2160A based devices.
* tag 'imx-dt64-5.17' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux: (56 commits)
arm64: dts: imx8mp-evk: configure multiple queues on eqos
arm64: dts: ls1028a-qds: add overlays for various serdes protocols
arm64: dts: ls1028a-qds: enable lpuart1
arm64: dts: ls1028a-qds: move rtc node to the correct i2c bus
arm64: dts: ls1028a-rdb: enable pwm0
arm64: dts: ls1028a: add flextimer based pwm nodes
arm64: dts: ls1028a: add ftm_alarm1 node to be used as wakeup source
arm64: dts: ls1028a: Add PCIe EP nodes
arm64: dts: lx2162a-qds: add interrupt line for RTC node
arm64: dts: lx2162a-qds: support SD UHS-I and eMMC HS400 modes
arm64: dts: lx2160a: enable usb3-lpm-capable for usb3 nodes
arm64: dts: lx2160a-qds: Add mdio mux nodes
arm64: dts: lx2160a: add optee-tz node
arm64: dts: lx2160a-rdb: Add Inphi PHY node
arm64: dts: imx8mm: don't assign PLL2 in SoC dtsi
arm64: dts: nitrogen8-som: correct i2c1 pad-ctrl
arm64: dts: nitrogen8-som: correct network PHY reset
arm64: dts: imx8mn-bsh-smm-s2/pro: Add iMX8MN BSH SMM S2 boards
arm64: dts: imx8mm/n: Remove the 'pm-ignore-notify' property
arm64: dts: imx8ulp: add power domain entry for usdhc
...
Link: https://lore.kernel.org/r/20211218071427.26745-5-shawnguo@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
i.MX arm device tree change for 5.17:
- New board support: TQ-Systems MBa6x, Y Soft IOTA Crux/Crux+ board,
JOZ Access Point, Phytec PEB-WLBT-05 support, BSH SMM-M2 IMX6ULZ
SystemMaster.
- Update SPBA bus node name to match binding schema.
- A series from Christoph Niedermaier to update imx6qdl-dhcom board
around Ethernet and USB support.
- A series from Giulio Benetti to clean up undocumented/unused fixed
clock compatibles.
- A series from Laurent Pinchart to update i.MX7 MIPI_CSI support.
- A couple of changes from Russell to update phy-mode for
vf610-zii-dev-rev-b board.
- Add Wacom digitizer support for imx7d-remarkable2 device.
* tag 'imx-dt-5.17' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux: (36 commits)
ARM: dts: imx6: phytec: Add PEB-WLBT-05 support
ARM: dts: imx6qdl: phytec: Add support for optional PEB-AV-02 LCD adapter
ARM: dts: imx6qdl: phytec: Add support for optional PEB-EVAL-01 board
ARM: dts: imx6qdl-dhcom: Add USB overcurrent pin on SoM layer
ARM: dts: imx7d-remarkable2: add wacom digitizer device
ARM: dts: imx6ulz-bsh-smm-m2: Add BSH SMM-M2 IMX6ULZ SystemMaster
ARM: dts: imx6qdl-dhcom: Identify the PHY by ethernet-phy-id0007.c0f0
ARM: dts: imx6qdl-dhcom: Align PHY reset timing with other DHCOM SoMs
ARM: dts: imx6qdl: drop "fsl,imx-ckih1"
ARM: dts: imx6qdl: drop "fsl,imx-ckil"
ARM: dts: imx6qdl: drop "fsl,imx-osc"
ARM: dts: imx53: drop "fsl,imx-ckih2"
ARM: dts: imx53: drop "fsl,imx-ckih1"
ARM: dts: imx53: drop "fsl,imx-ckil"
ARM: dts: imx53: drop "fsl,imx-osc"
ARM: dts: imx51: drop "fsl,imx-ckih2"
ARM: dts: imx51: drop "fsl,imx-ckih1"
ARM: dts: imx51: drop "fsl,imx-ckil"
ARM: dts: imx51: drop "fsl,imx-osc"
ARM: dts: imx50: drop "fsl,imx-ckih2"
...
Link: https://lore.kernel.org/r/20211218071427.26745-4-shawnguo@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
mvebu dt for 5.17 (part 1)
Add generic compatible to UART nodes on Armada 38x
* tag 'mvebu-dt-5.17-1' of git://git.kernel.org/pub/scm/linux/kernel/git/gclement/mvebu:
ARM: dts: armada-38x: Add generic compatible to UART nodes
Link: https://lore.kernel.org/r/875yrnm8uq.fsf@BL-laptop
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Devicetree changes for TI K3 platforms for v5.17 merge window:
* New Platforms:
- J721s2 SoC, SoM and Common Processor Board support
* New features:
- CAN support on AM64 EVM and SK
- TimeSync Router on AM64
* Fixes:
- Correct d-cache-sets info on J7200
- Fix L2 cache-sets value for J721e/J7200/AM64
- Fixes for dtbs_check warnings wrt serdes_ln_ctrl node on J721e/J7200
- Disable McASP on IoT2050 board to fix dtbs_check warnings
* tag 'ti-k3-dt-for-v5.17' of git://git.kernel.org/pub/scm/linux/kernel/git/ti/linux:
arch: arm64: ti: Add support J721S2 Common Processor Board
arm64: dts: ti: Add initial support for J721S2 System on Module
arm64: dts: ti: Add initial support for J721S2 SoC
dt-bindings: pinctrl: k3: Introduce pinmux definitions for J721S2
dt-bindings: arm: ti: Add bindings for J721s2 SoC
arm64: dts: ti: iot2050: Disable mcasp nodes at dtsi level
arm64: dts: ti: k3-am642-evm/sk: Add support for main domain mcan nodes in EVM and disable them on SK
arm64: dts: ti: k3-am64-main: Add support for MCAN
arm64: dts: ti: k3-j721e-common-proc-board: Add support for mcu and main mcan nodes
arm64: dts: ti: k3-j721e: Add support for MCAN nodes
arm64: dts: ti: am654-base-board/am65-iot2050-common: Disable mcan nodes
arm64: dts: ti: k3-am65-mcu: Add Support for MCAN
arm64: dts: ti: k3-am64-main: add timesync router node
arm64: dts: ti: k3-j7200: Correct the d-cache-sets info
arm64: dts: ti: k3-j721e: Fix the L2 cache sets
arm64: dts: ti: k3-j7200: Fix the L2 cache sets
arm64: dts: ti: k3-am642: Fix the L2 cache sets
arm64: dts: ti: j721e-main: Fix 'dtbs_check' in serdes_ln_ctrl node
arm64: dts: ti: j7200-main: Fix 'dtbs_check' serdes_ln_ctrl node
arm64: dts: ti: k3-j721e: correct cache-sets info
Link: https://lore.kernel.org/r/20211217172806.10023-2-vigneshr@ti.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
arm64: tegra: Device tree changes for v5.17-rc1
The vast majority of this contains various updates and cleanups to the
Tegra device trees that will eventually help validate all of them using
the dt-schema infrastructure.
Another notable chunk of this contains additional Tegra234 support as
well as support for the new Jetson AGX Orin Developer Kit.
* tag 'tegra-for-5.17-arm64-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux: (47 commits)
arm64: tegra: Add host1x hotflush reset on Tegra210
arm64: tegra: Hook up MMC and BPMP to memory controller
arm64: tegra: Add memory controller on Tegra234
arm64: tegra: Add EMC general interrupt on Tegra194
arm64: tegra: Update SDMMC4 speeds for Tegra194
arm64: tegra: Add dma-coherent for Tegra194 VIC
arm64: tegra: Rename Ethernet PHY nodes
arm64: tegra: Remove unused only-1-8-v properties
arm64: tegra: Sort Tegra210 XUSB clocks correctly
arm64: tegra: Add missing TSEC properties on Tegra210
arm64: tegra: jetson-nano: Remove extra PLL power supplies for PCIe and XUSB
arm64: tegra: smaug: Remove extra PLL power supplies for XUSB
arm64: tegra: jetson-tx1: Remove extra PLL power supplies for PCIe and XUSB
arm64: tegra: Rename GPIO hog nodes to match schema
arm64: tegra: Remove unsupported regulator properties
arm64: tegra: Rename TCU node to "serial"
arm64: tegra: Remove undocumented Tegra194 PCIe "core_m" clock
arm64: tegra: Drop unused properties for Tegra194 PCIe
arm64: tegra: Fix Tegra194 HSP compatible string
arm64: tegra: Drop unsupported nvidia,lpdr property
...
Link: https://lore.kernel.org/r/20211217162253.1801077-4-thierry.reding@gmail.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
The current 'rx-internal-delay-ps' property value on the Realtek switch
node, 2000, will be divided by 300, resulting in 6.66, which will be
rounded to the closest step value, 7. Change it to 2100 to be accurate.
See ef136837aa ("net: dsa: rtl8365mb: set RGMII RX delay in steps of
0.3 ns") for reference.
Flow control needs to be enabled on both sides of the internal and
external switch. It is already enabled on the CPU port of the Realtek
switch so we also enable it on the external switch port of the Broadcom
switch as well.
Signed-off-by: Arınç ÜNAL <arinc.unal@arinc9.com>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Rename the SATA controller unit name from ahci to sata in preparation
for adding the Broadcom SATA3 controller YAML binding which will bring
validation.
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Rename the msi controller unit name to 'msi' to avoid collisions with
the 'msi-controller' boolean property.
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Rename the msi controller unit name to 'msi' to avoid collisions with
the 'msi-controller' boolean property.
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Update the PCIe PHY node unit name and its sub-nodes to help with
upcoming changes converting the Cygnus PCIe PHY DT binding to YAML and
later the iProc PCIe controller binding to YAML.
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Rename the msi controller unit name to 'msi' to avoid collisions with
the 'msi-controller' boolean property. We also need to re-arrange the
'ranges' property to show the two cells as being separate instead of
combined since the DT checker is not able to differentiate otherwise.
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Add generic compatible string "ns16550a" to serial port nodes of Armada
38x.
This makes it possible to use earlycon.
Fixes: 0d3d96ab00 ("ARM: mvebu: add Device Tree description of the Armada 380/385 SoCs")
Signed-off-by: Pali Rohár <pali@kernel.org>
Signed-off-by: Marek Behún <kabel@kernel.org>
Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
CN9130 has a built-in CP115 which has 2 GPIO controllers, but unlike in
Armada 7k and 8k both are left disabled by the SoC DTSI.
This first of all makes no sense as they are always present due to being
SoC built-in and its an issue as boards like CN9130-CRB use the CPO GPIO2
pins for regulators and SD card support without enabling them first.
So, enable both of them like Armada 7k and 8k do.
Fixes: 6b8970bd8d ("arm64: dts: marvell: Add support for Marvell CN9130 SoC support")
Signed-off-by: Robert Marko <robert.marko@sartura.hr>
Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
CN9130 has one CP115 built in, which like the CP110 has 2 GPIO and 2 SPI
controllers built-in.
However, unlike the Armada 7k and 8k the SoC DTSI doesn't add the required
aliases as both the Orion SPI driver and MVEBU GPIO drivers require the
aliases to be present.
So add the required aliases for GPIO and SPI controllers.
Fixes: 6b8970bd8d ("arm64: dts: marvell: Add support for Marvell CN9130 SoC support")
Signed-off-by: Robert Marko <robert.marko@sartura.hr>
Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
Kernel driver phy-mvebu-a3700-comphy.c needs to know the rate of the
reference xtal clock. So add missing xtal clock source into comphy device
tree node. If the property is not present, the driver defaults to 25 MHz
xtal rate (which, as far as we know, is used by all the existing boards).
Signed-off-by: Pali Rohár <pali@kernel.org>
Signed-off-by: Marek Behún <kabel@kernel.org>
Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
Renesas DT binding updates for v5.17 (take two)
- Document support for the R-Car S4-8 Spider CPU and BreakOut boards.
* tag 'renesas-dt-bindings-for-v5.17-tag2' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel:
dt-bindings: arm: renesas: Document Renesas Spider boards
Link: https://lore.kernel.org/r/cover.1639736725.git.geert+renesas@glider.be
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Memory Client should be blocked before hardware reset is asserted in order
to prevent memory corruption and hanging of memory controller.
Document Memory Client resets of Host1x, GR2D and GR3D hardware units.
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Document new DVFS OPP table and power domain properties of the Host1x bus
and devices sitting on the bus.
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Document sub-nodes which describe Tegra SoC clocks that require a higher
voltage of the core power domain in order to operate properly on a higher
clock rates. Each node contains a phandle to OPP table and power domain.
The root PLLs and system clocks don't have any specific device dedicated
to them, clock controller is in charge of managing power for them.
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Document Tegra20/30/114-based ASUS Transformer Series tablet devices.
This group includes EeePad TF101, Prime TF201, Pad TF300T, TF300TG
Infinity TF700T, TF701T.
Signed-off-by: David Heidelberg <david@ixit.cz>
Signed-off-by: Anton Bambura <jenneron@protonmail.com>
Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Add the interconnects, interconnect-names and iommus properties to the
device tree bindings for the Tegra XUDC controller. These are used to
describe the device's paths to and from memory.
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Thierry Reding <treding@nvidia.com>
