PD#149239: hdmitx: fix 4k smpte no signal
when 4k smpte 444,10bit, div40 and scramble need be setted
Change-Id: Iadfc337519e1444c244b36086c3929d231bd80c4
Signed-off-by: Kaifu Hu <kaifu.hu@amlogic.com>
PD#149868: vout: optimize tvout monitor function as below:
1.add vout_mutex lock to prevent tvout_monitor and vout_mode_store
running at the same time;
2.vout_mode_store operation will stop tvout_monitor running.
Change-Id: Ic2578357edb17cf471b90bec50ba11eb9178a8e9
Signed-off-by: Evoke Zhang <evoke.zhang@amlogic.com>
PD#149888: constrains max channels number by DTS lanes
and tx_mask configs. If not, FIFO will fetch the wrong
data and cause abnormal behavior for I2S data.
Change-Id: Ic10bb773f6360ad0dfee74c227adb279dcc47cec
Signed-off-by: Shuai Li <shuai.li@amlogic.com>
PD#145715: kernel 4.9 use components to wrapper the codec instance.
When poring form early versions, we have no idea about
this change. And this commit fixes this issue.
Change-Id: I56357b45c1bf93844f77fe89a828911fa9779406
Signed-off-by: Shuai Li <shuai.li@amlogic.com>
PD#149771: enable configs to fix AndroidO CTS and VTS fail
CONFIG_IKCONFIG_PROC=y
CONFIG_TASKSTATS=y
CONFIG_TASK_DELAY_ACCT=y
CONFIG_TASK_XACCT=y
CONFIG_TASK_IO_ACCOUNTING=y
CONFIG_IKCONFIG=y
CONFIG_CPU_FREQ_STAT=y
In order to know how the kernel was configured via /proc,
select the CONFIG_IKCONFIG_PROC is a good choice.
Change-Id: Ief65788029157adfbd3351f6a1d589670e440d76
Signed-off-by: Ao Xu <ao.xu@amlogic.com>
PD#149671: mm: export symbol for show_mem.
export symbol for show_mem() and other modules can use the function
Change-Id: Ia4b0c595ada1db2326e07d67b136ad92c9d3cb67
Signed-off-by: binqi.zhang <binqi.zhang@amlogic.com>
(cherry picked from commit 53577ac0164bcd9e933ec43c18139f2f1c55ea56)
PD#149681: removed the operation of registers in the rdma_init
Change-Id: Iecf12be123952d0a5eb91b77e433d3fb67378d4e
Signed-off-by: Nanxin Qin <nanxin.qin@amlogic.com>
PD#149672:
modified dts tdma data pinmux, tdma output data pin
need be set tdma_out1. otherwise soc can not send data
to Bluetooth.
Change-Id: I62a0ea89de092c6b9c3504223822e8c7fd58ecad
Signed-off-by: Peipeng Zhao <peipeng.zhao@amlogic.com>
PD#146152: merged code from 43177e6a on the amlogic-3.14-dev
1. support for multi-instance features
2. fixed in multi-instance codec_mm memory bugs and added some
debugging information
3. optimization of vfm problems
Change-Id: I43ba9d4894ae71d53c158df667490030735b9e1e
Signed-off-by: Nanxin Qin <nanxin.qin@amlogic.com>
Signed-off-by: KeLe Bai <kele.bai@amlogic.com>
PD#147540: audio: add snd mixer controls for tdm/spdif
1. add gain/mute/swap/mask for tdm/spdif
2. channel status for spdif in/out
3. add loopback for s420, and fix datain channel number
Change-Id: I81d4432dc2b73c7cb0275087fc3d4e23ec83e400
Signed-off-by: Xing Wang <xing.wang@amlogic.com>
PD#149212: cec: fix rcu stall by spinlock
Using irqsave/irqrestore API to prevent rcu stall by spinlock
Change-Id: Ia960864e1f9b21f11c1f9656da2c0efbf221a8ac
Signed-off-by: Tao Zeng <tao.zeng@amlogic.com>
PD#149289: using BL31 cmd to access hdmi reg
1.hdmitx register may be accessed by kernel, bl30, bl31, etc...
To avoid concurrence issue, all should be only one port to access
hdmitx registers.Uniform kernel access to bl31.
2.optimize hdmitx driver style.
Change-Id: Ie5ae4b8bb8a641ccd39375b9addf9a8b01dcf464
Signed-off-by: Yi Zhou <yi.zhou@amlogic.com>
PD#149218: nand: add a new nand flash "TC58NVG2S0HBAI6" for SU customer
Change-Id: I06b832365db629bd4c46fa6b6fa6ab4656267602
Signed-off-by: Yi Zeng <“yi.zeng@amlogic.com”>
PD#149114: S420 V03 speaker no sound when playing 2-ch wav
S400 & S420 modify the lineout and speaker out on TDMC dataIO2.
This commit make the speaker output available
by the output lanemask setting:
"dai-tdm-lane-slot-mask-out = <0 0 1 0>;"
It masks the third lane as data output when playing two channel
PCM waves.
Change-Id: Id1627c06f24f3fb57cc645247ca8183f197656db
Signed-off-by: Shuai Li <shuai.li@amlogic.com>
PD#149164: modified codec tlv320adc3101 to support multi config through
amixer
Change-Id: I8c679a2ef6b977efd84d3951fa6d0012a5c8af50
Signed-off-by: Peipeng Zhao <peipeng.zhao@amlogic.com>
PD#148637: clear line_delay on every line calibration,
so any line's line_delay will not interfere with each other.
Change-Id: I784f66ab9df111b886ab0e45fa007f3bb2dc111e
Signed-off-by: Nan Li <nan.li@amlogic.com>
PD#148390: add nandkey and secure storage
the reserve mem used by secure monitor comes form secure os.
we should not redefine it in DTS
Change-Id: If42f2410474e090ed5b2bca143d5a9d16260f49c
Signed-off-by: Jiamin Ma <jiamin.ma@amlogic.com>
Changes in 4.9.42
parisc: Handle vma's whose context is not current in flush_cache_range
cgroup: create dfl_root files on subsys registration
cgroup: fix error return value from cgroup_subtree_control()
libata: array underflow in ata_find_dev()
workqueue: restore WQ_UNBOUND/max_active==1 to be ordered
iwlwifi: dvm: prevent an out of bounds access
brcmfmac: fix memleak due to calling brcmf_sdiod_sgtable_alloc() twice
NFSv4: Fix EXCHANGE_ID corrupt verifier issue
mmc: sdhci-of-at91: force card detect value for non removable devices
device property: Make dev_fwnode() public
mmc: core: Fix access to HS400-ES devices
mm, mprotect: flush TLB if potentially racing with a parallel reclaim leaving stale TLB entries
cpuset: fix a deadlock due to incomplete patching of cpusets_enabled()
ALSA: hda - Fix speaker output from VAIO VPCL14M1R
drm/amdgpu: Fix undue fallthroughs in golden registers initialization
ASoC: do not close shared backend dailink
KVM: async_pf: make rcu irq exit if not triggered from idle task
mm/page_alloc: Remove kernel address exposure in free_reserved_area()
timers: Fix overflow in get_next_timer_interrupt
powerpc/tm: Fix saving of TM SPRs in core dump
powerpc/64: Fix __check_irq_replay missing decrementer interrupt
iommu/amd: Enable ga_log_intr when enabling guest_mode
gpiolib: skip unwanted events, don't convert them to opposite edge
ext4: fix SEEK_HOLE/SEEK_DATA for blocksize < pagesize
ext4: fix overflow caused by missing cast in ext4_resize_fs()
ARM: dts: armada-38x: Fix irq type for pca955
ARM: dts: tango4: Request RGMII RX and TX clock delays
media: platform: davinci: return -EINVAL for VPFE_CMD_S_CCDC_RAW_PARAMS ioctl
iscsi-target: Fix initial login PDU asynchronous socket close OOPs
mmc: dw_mmc: Use device_property_read instead of of_property_read
mmc: core: Use device_property_read instead of of_property_read
media: lirc: LIRC_GET_REC_RESOLUTION should return microseconds
f2fs: sanity check checkpoint segno and blkoff
Btrfs: fix early ENOSPC due to delalloc
saa7164: fix double fetch PCIe access condition
tcp_bbr: cut pacing rate only if filled pipe
tcp_bbr: introduce bbr_bw_to_pacing_rate() helper
tcp_bbr: introduce bbr_init_pacing_rate_from_rtt() helper
tcp_bbr: remove sk_pacing_rate=0 transient during init
tcp_bbr: init pacing rate on first RTT sample
ipv4: ipv6: initialize treq->txhash in cookie_v[46]_check()
net: Zero terminate ifr_name in dev_ifname().
ipv6: avoid overflow of offset in ip6_find_1stfragopt
net: dsa: b53: Add missing ARL entries for BCM53125
ipv4: initialize fib_trie prior to register_netdev_notifier call.
rtnetlink: allocate more memory for dev_set_mac_address()
mcs7780: Fix initialization when CONFIG_VMAP_STACK is enabled
openvswitch: fix potential out of bound access in parse_ct
packet: fix use-after-free in prb_retire_rx_blk_timer_expired()
ipv6: Don't increase IPSTATS_MIB_FRAGFAILS twice in ip6_fragment()
net: ethernet: nb8800: Handle all 4 RGMII modes identically
dccp: fix a memleak that dccp_ipv6 doesn't put reqsk properly
dccp: fix a memleak that dccp_ipv4 doesn't put reqsk properly
dccp: fix a memleak for dccp_feat_init err process
sctp: don't dereference ptr before leaving _sctp_walk_{params, errors}()
sctp: fix the check for _sctp_walk_params and _sctp_walk_errors
net/mlx5: Consider tx_enabled in all modes on remap
net/mlx5: Fix command bad flow on command entry allocation failure
net/mlx5e: Fix outer_header_zero() check size
net/mlx5e: Fix wrong delay calculation for overflow check scheduling
net/mlx5e: Schedule overflow check work to mlx5e workqueue
net: phy: Correctly process PHY_HALTED in phy_stop_machine()
xen-netback: correctly schedule rate-limited queues
sparc64: Measure receiver forward progress to avoid send mondo timeout
sparc64: Fix exception handling in UltraSPARC-III memcpy.
wext: handle NULL extra data in iwe_stream_add_point better
sh_eth: fix EESIPR values for SH77{34|63}
sh_eth: R8A7740 supports packet shecksumming
net: phy: dp83867: fix irq generation
tg3: Fix race condition in tg3_get_stats64().
x86/boot: Add missing declaration of string functions
spi: spi-axi: Free resources on error path
ASoC: rt5645: set sel_i2s_pre_div1 to 2
netfilter: use fwmark_reflect in nf_send_reset
phy state machine: failsafe leave invalid RUNNING state
ipv4: make tcp_notsent_lowat sysctl knob behave as true unsigned int
clk/samsung: exynos542x: mark some clocks as critical
scsi: qla2xxx: Get mutex lock before checking optrom_state
drm/virtio: fix framebuffer sparse warning
ARM: dts: sun8i: Support DTB build for NanoPi M1
ARM: dts: sunxi: Change node name for pwrseq pin on Olinuxino-lime2-emmc
iw_cxgb4: do not send RX_DATA_ACK CPLs after close/abort
nbd: blk_mq_init_queue returns an error code on failure, not NULL
virtio_blk: fix panic in initialization error path
ARM: 8632/1: ftrace: fix syscall name matching
mm, slab: make sure that KMALLOC_MAX_SIZE will fit into MAX_ORDER
lib/Kconfig.debug: fix frv build failure
signal: protect SIGNAL_UNKILLABLE from unintentional clearing.
mm: don't dereference struct page fields of invalid pages
net/mlx5: E-Switch, Re-enable RoCE on mode change only after FDB destroy
ipv4: Should use consistent conditional judgement for ip fragment in __ip_append_data and ip_finish_output
net: account for current skb length when deciding about UFO
net: phy: Fix PHY unbind crash
workqueue: implicit ordered attribute should be overridable
Linux 4.9.42
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
commit 0a94efb5ac upstream.
5c0338c687 ("workqueue: restore WQ_UNBOUND/max_active==1 to be
ordered") automatically enabled ordered attribute for unbound
workqueues w/ max_active == 1. Because ordered workqueues reject
max_active and some attribute changes, this implicit ordered mode
broke cases where the user creates an unbound workqueue w/ max_active
== 1 and later explicitly changes the related attributes.
This patch distinguishes explicit and implicit ordered setting and
overrides from attribute changes if implict.
Signed-off-by: Tejun Heo <tj@kernel.org>
Fixes: 5c0338c687 ("workqueue: restore WQ_UNBOUND/max_active==1 to be ordered")
Cc: Holger Hoffstätte <holger@applied-asynchrony.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 7b9a88a390 upstream.
The PHY library does not deal very well with bind and unbind events. The first
thing we would see is that we were not properly canceling the PHY state machine
workqueue, so we would be crashing while dereferencing phydev->drv since there
is no driver attached anymore.
Suggested-by: Russell King <rmk+kernel@armlinux.org.uk>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Cc: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit a5cb659bbc ]
Our customer encountered stuck NFS writes for blocks starting at specific
offsets w.r.t. page boundary caused by networking stack sending packets via
UFO enabled device with wrong checksum. The problem can be reproduced by
composing a long UDP datagram from multiple parts using MSG_MORE flag:
sendto(sd, buff, 1000, MSG_MORE, ...);
sendto(sd, buff, 1000, MSG_MORE, ...);
sendto(sd, buff, 3000, 0, ...);
Assume this packet is to be routed via a device with MTU 1500 and
NETIF_F_UFO enabled. When second sendto() gets into __ip_append_data(),
this condition is tested (among others) to decide whether to call
ip_ufo_append_data():
((length + fragheaderlen) > mtu) || (skb && skb_is_gso(skb))
At the moment, we already have skb with 1028 bytes of data which is not
marked for GSO so that the test is false (fragheaderlen is usually 20).
Thus we append second 1000 bytes to this skb without invoking UFO. Third
sendto(), however, has sufficient length to trigger the UFO path so that we
end up with non-UFO skb followed by a UFO one. Later on, udp_send_skb()
uses udp_csum() to calculate the checksum but that assumes all fragments
have correct checksum in skb->csum which is not true for UFO fragments.
When checking against MTU, we need to add skb->len to length of new segment
if we already have a partially filled skb and fragheaderlen only if there
isn't one.
In the IPv6 case, skb can only be null if this is the first segment so that
we have to use headersize (length of the first IPv6 header) rather than
fragheaderlen (length of IPv6 header of further fragments) for skb == NULL.
Fixes: e89e9cf539 ("[IPv4/IPv6]: UFO Scatter-gather approach")
Fixes: e4c5e13aa4 ("ipv6: Should use consistent conditional judgement for
ip6 fragment between __ip6_append_data and ip6_finish_output")
Signed-off-by: Michal Kubecek <mkubecek@suse.cz>
Acked-by: Vlad Yasevich <vyasevic@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
