arm64: tegra: Device tree changes for v5.15-rc1
Contains a couple of fixes across the board and adds support for the
recently released NVIDIA Jetson TX2 NX Developer Kit.
* tag 'tegra-for-5.15-arm64-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux:
arm64: tegra: Fix compatible string for Tegra132 CPUs
arm64: tegra: Add missing interconnects property for USB on Tegra186
arm64: tegra: Add NVIDIA Jetson TX2 NX Developer Kit support
arm64: tegra: Add PWM nodes on Tegra186
arm64: tegra194: p2888: Correct interrupt trigger type of temperature sensor
arm64: tegra: Fix Tegra194 PCIe EP compatible string
Link: https://lore.kernel.org/r/20210813162157.2820913-6-thierry.reding@gmail.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
ARM: tegra: Device tree changes for v5.15-rc1
The majority of this is temperature sensor additions for various devices
and fixes to the trigger type of the thermal interrupts.
Other than that there are various minor fixes across the board.
* tag 'tegra-for-5.15-arm-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux:
ARM: tegra: tamonten: Fix UART pad setting
ARM: tegra: nexus7: Improve thermal zones
ARM: tegra: acer-a500: Improve thermal zones
ARM: tegra: acer-a500: Use verbose variant of atmel,wakeup-method value
ARM: tegra: acer-a500: Add power supplies to accelerometer
ARM: tegra: acer-a500: Remove bogus USB VBUS regulators
ARM: tegra: jetson-tk1: Correct interrupt trigger type of temperature sensor
ARM: tegra: dalmore: Correct interrupt trigger type of temperature sensor
ARM: tegra: cardhu: Correct interrupt trigger type of temperature sensor
ARM: tegra: apalis: Correct interrupt trigger type of temperature sensor
ARM: tegra: nyan: Correct interrupt trigger type of temperature sensor
ARM: tegra: acer-a500: Add interrupt to temperature sensor node
ARM: tegra: nexus7: Add interrupt to temperature sensor node
ARM: tegra: paz00: Add interrupt to temperature sensor node
ARM: tegra: ouya: Add interrupt to temperature sensor node
ARM: tegra: Add SoC thermal sensor to Tegra30 device-trees
Link: https://lore.kernel.org/r/20210813162157.2820913-4-thierry.reding@gmail.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
dt-bindings: Changes for v5.15-rc1
This contains a single patch that adds the compatible string for the
NVIDIA Jetson TX2 NX developer kit.
* tag 'tegra-for-5.15-dt-bindings' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux:
dt-bindings: tegra: Document NVIDIA Jetson TX2 NX developer kit
Link: https://lore.kernel.org/r/20210813162157.2820913-1-thierry.reding@gmail.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Document the compatible for the Ten64 board which will
be included as freescale/fsl-ls1088a-ten64.dtb in arm64.
Signed-off-by: Mathew McBride <matt@traverse.com.au>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Traverse Technologies is a designer and manufacturer
of networking appliances.
Signed-off-by: Mathew McBride <matt@traverse.com.au>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
The documented compatible string for the CPUs found on Tegra132 is
"nvidia,tegra132-denver", rather than the previously used compatible
string "nvidia,denver".
Signed-off-by: Thierry Reding <treding@nvidia.com>
This patch fixes the tristate and pullup configuration for UART 1 to 3
on the Tamonten SOM.
Signed-off-by: Andreas Obergschwandtner <andreas.obergschwandtner@gmail.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Use skin temperature for maintaining temperature that is suitable
specifically for Nexus 7. Add CPU thermal zone that protects silicon.
All these changes don't make a significant difference, but it is a
more correct definition of thermal zones.
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Use skin temperature for maintaining temperature that is suitable
specifically for A500. Add CPU thermal zone that protects silicon.
All these changes don't make a significant difference, but it is a
more correct definition of thermal zones.
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
The verbose variant of the atmel,wakeup-method value was lost when patch
that added the property was merged because it conflicted with other patch,
re-add it for consistency.
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
The configuration of USB VBUS regulators was borrowed from downstream
kernel, which is incorrect because the corresponding GPIOs are connected
to PROX_EN (A501 3G model) and LED_EN pins in accordance to the board
schematics. USB works fine with both GPIOs being disabled, so remove the
bogus USB VBUS regulators. The USB VBUS of USB3 is supplied from the fixed
5v system regulator and device-mode USB1 doesn't have VBUS switches.
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
The LM90 temperature sensor should use edge-triggered interrupt because
LM90 hardware doesn't deassert interrupt line until temperature is back
to normal state, which results in interrupt storm. Correct the interrupt
trigger type.
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
The LM90 temperature sensor should use edge-triggered interrupt because
LM90 hardware doesn't deassert interrupt line until temperature is back
to normal state, which results in interrupt storm. Correct the interrupt
trigger type.
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
The LM90 temperature sensor should use edge-triggered interrupt because
LM90 hardware doesn't deassert interrupt line until temperature is back
to normal state, which results in interrupt storm. Correct the interrupt
trigger type.
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
The LM90 temperature sensor should use edge-triggered interrupt because
LM90 hardware doesn't deassert interrupt line until temperature is back
to normal state, which results in interrupt storm. Correct the interrupt
trigger type.
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
The LM90 temperature sensor should use edge-triggered interrupt because
LM90 hardware doesn't deassert interrupt line until temperature is back
to normal state, which results in interrupt storm. Correct the interrupt
trigger type.
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
The TEMP_ALERT pin of LM90 temperature sensor is connected to Tegra SoC.
Add interrupt property to the temperature sensor for completeness.
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
The TEMP_ALERT pin of LM90 temperature sensor is connected to Tegra SoC.
Add interrupt property to the temperature sensor for completeness.
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
The TEMP_ALERT pin of LM90 temperature sensor is connected to Tegra SoC.
Add interrupt property to the temperature sensor for completeness.
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
The TEMP_ALERT pin of LM90 temperature sensor is connected to Tegra SoC.
Add interrupt property to the temperature sensor and enable it in pinmux,
for completeness.
Tested-by: Matt Merhar <mattmerhar@protonmail.com>
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Add the on-chip SoC thermal sensor to Tegra30 device-trees. Now CPU
temperature reporting and thermal throttling is available on all Tegra30
devices universally.
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Changes for am3 cpsw and SanCloud for v5.15
A series of changes to update am3 to use cpsw switch driver and
few updates to earlier SanCloud changes. The plan was to send the
cpsw switch driver changes earlier but looks like I never tagged
the mail thread in my inbox to apply for v5.15.
* tag 'omap-for-v5.15/dt-am3-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap:
ARM: dts: am335x-sancloud-bbe: Drop usb wifi comment
ARM: dts: am335x-sancloud-bbe: Fix missing pinctrl refs
ARM: dts: am335x-bone: switch to new cpsw switch drv
ARM: dts: am33xx: update ethernet aliases
ARM: dts: am335x-sl50: switch to new cpsw switch drv
ARM: dts: am335x-shc: switch to new cpsw switch drv
ARM: dts: am335x-phycore: switch to new cpsw switch drv
ARM: dts: am335x-pepper: switch to new cpsw switch drv
ARM: dts: am335x-pdu001: switch to new cpsw switch drv
ARM: dts: am335x-osd3358-sm-red: switch to new cpsw switch drv
ARM: dts: am335x-myirtech: switch to new cpsw switch drv
ARM: dts: am335x-moxa-uc: switch to new cpsw switch drv
ARM: dts: am335x-lxm: switch to new cpsw switch drv
ARM: dts: am335x-igep0033: switch to new cpsw switch drv
ARM: dts: am335x-cm-t335: switch to new cpsw switch drv
ARM: dts: am335x-chiliboard: switch to new cpsw switch drv
ARM: dts: am335x-nano: switch to new cpsw switch drv
ARM: dts: am335x-baltos: switch to new cpsw switch drv
Link: https://lore.kernel.org/r/pull-1628751694-126144@atomide.com-3
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Samsung DTS ARM64 changes for v5.15
1. Add CPU topology and cache information to Exynos DTSI files.
2. Correct GIC CPU interfaces address range on Exynos7.
* tag 'samsung-dt64-5.15' of git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux:
arm64: dts: exynos: correct GIC CPU interfaces address range on Exynos7
arm64: dts: exynos: add CPU topology to Exynos5433
arm64: dts: exynos: Add cpu cache information to Exynos5433
arm64: dts: exynos: Add cpu cache information to Exynos7
Link: https://lore.kernel.org/r/20210811085128.30103-2-krzysztof.kozlowski@canonical.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Samsung DTS ARM changes for v5.15
Add CPU topology to all Exynos DTSI files.
* tag 'samsung-dt-5.15' of git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux:
ARM: dts: exynos: add CPU topology to Exynos5422
ARM: dts: exynos: add CPU topology to Exynos5420
ARM: dts: exynos: add CPU topology to Exynos5260
ARM: dts: exynos: add CPU topology to Exynos5250
ARM: dts: exynos: add CPU topology to Exynos4412
ARM: dts: exynos: add CPU topology to Exynos4210
ARM: dts: exynos: add CPU topology to Exynos3250
Link: https://lore.kernel.org/r/20210811085128.30103-1-krzysztof.kozlowski@canonical.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
MT8173:
- Add regulator for MFG_ASYNC power domain
- Use alias for MMC to get fixed numbers
MT8183:
- Use alia for MMC to get fixed numbers
- Add optional event number for Global Comman Engine
* tag 'v5.14-next-dts64' of git://git.kernel.org/pub/scm/linux/kernel/git/matthias.bgg/linux:
dt-bindings: mediatek: Add optional mediatek,gce-events property
arm64: dts: mt8183: add mediatek,gce-events in mutex
arm64: dts: mediatek: mt8173: Add domain supply for mfg_async
arm64: dts: mt8173: elm: Use aliases to mmc nodes
arm64: dts: mt8183: kukui: Use aliases to mmc nodes
Link: https://lore.kernel.org/r/26c4026a-9f26-d5a3-c30f-439120a4eaa0@gmail.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
IXP4xx DTS file updates for the v5.15 kernel cycle:
- Fix up some (non-urgent) IRQ flags for the PCI buses.
- Add the second UART to the generic ixp4xx.dtsi
- Make use of the new expansion bus driver in all device
trees with e.g. flash memory on the expansion bus.
- Adds the CF card slot to the Gateworks GW2358.
- Add new device trees for:
- Iomega NAS 100D
- D-Link DSM-G600
- Netgear WG302v2
- Arcom Vulcan
- Gateworks Avila GW2348
- Intel IXPD425 and siblings
- Coyote and IXDPG425
- Linksys WRV54G
* tag 'ixp4xx-dts-arm-soc-v5.15-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-nomadik:
ARM: dts: ixp4xx: Add a devicetree for Freecom FSG-3
ARM: dts: ixp4xx: Add devicetree for Linksys WRV54G
ARM: dts: ixp4xx: Add device trees for Coyote and IXDPG425
ARM: dts: ixp4xx: Add Intel IXDP425 etc reference designs
ARM: dts: ixp4xx: Add CF to GW2358
ARM: dts: ixp4xx: Add Gateworks Avila GW2348 device tree
ARM: dts: ixp4xx: Add Arcom Vulcan device tree
ARM: dts: ixp4xx: Add devicetree for Netgear WG302v2
ARM: dts: ixp4xx: Use the expansion bus
ARM: dts: ixp4xx: Add second UART
ARM: dts: ixp4xx: Add devicetree for D-Link DSM-G600 rev A
ARM: dts: ixp4xx: Move EPBX100 flash to external bus node
ARM: dts: ixp4xx: Add devicetree for Iomega NAS 100D
ARM: dts: ixp4xx: Fix up bad interrupt flags
Link: https://lore.kernel.org/r/CACRpkdY19AvWT--OcmEKbwFue_EcThVs7uZeHkzORten7xj-RA@mail.gmail.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
The device tree node for the XUDC (USB device mode controller) is
missing the interconnects property that describes the path to memory for
the controller. Add the property so that the things like the DMA mask
can be set by the operating system.
Signed-off-by: Thierry Reding <treding@nvidia.com>
The Jetson TX2 NX Developer Kit is very similar to the Jetson Nano, but
uses the more powerful Tegra186 SoC.
Signed-off-by: Thierry Reding <treding@nvidia.com>
These PWMs can be used for fan or LED backlight control. Add the device
tree nodes for all existing controllers found on Tegra186 SoCs. None of
these are enabled by default, which is left for the board DTS files to
do when necessary.
Signed-off-by: Thierry Reding <treding@nvidia.com>
The Jetson TX2 NX Developer Kit is the same form factor as Jetson Nano,
but uses the more powerful Tegra186 SoC for added performance.
Signed-off-by: Thierry Reding <treding@nvidia.com>
The LM90 temperature sensor should use edge-triggered interrupt because
LM90 hardware doesn't deassert interrupt line until temperature is back
to normal state, which results in interrupt storm. Correct the interrupt
trigger type.
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Renesas RZ/G2L DT Binding Definitions Update
Missing definition for the P0_DIV2 core clock on the Renesas RZ/G2L
(R9A07G044) SoC, shared by driver and DT source files.
