This value is better to be 0x10 instead of 0x16 by new test report
to keep all RK356x work consistently.
Signed-off-by: Shawn Lin <shawn.lin@rock-chips.com>
Change-Id: I87a22f6e02a6206981fe484db353613ac9a3ede6
1. fix iommu head file
2. fix slab head file
3. fix drm head file
4. drop api only work in kernel-3.10
5. fix iommu api
Change-Id: I551ceb4a01c4070dfbb5fa842a6790894177713e
Signed-off-by: Simon Xue <xxm@rock-chips.com>
Add binding documentation for the power domains
found on Rockchip RK3568 SoCs.
Signed-off-by: Finley Xiao <finley.xiao@rock-chips.com>
Change-Id: I7544a643096948e75f59fb8126201b0de142440d
Add cru regs dump when system panic. It's just for debug.
Signed-off-by: Finley Xiao <finley.xiao@rock-chips.com>
Change-Id: I3c39c974523238b0140492be5e9eceb1811b3945
The max parent rate of dclk_vop_frac is improved to 800MHz on rk3308b.
Change-Id: Ie36120ac7048fc4c983547539a6bce34d737529d
Signed-off-by: Finley Xiao <finley.xiao@rock-chips.com>
Since the MMU base is not shifted forward, when the sync/async mode
is called together, the same memory is used to store the page table,
resulting in data errors.
Signed-off-by: Yu Qiaowei <cerf.yu@rock-chips.com>
Change-Id: If4807da8159e98a8d807cc24b4d6533793eeefa8
When system shutdown, shutdown interface will be called.
Hdmi should be disabled when system shutdown.
Change-Id: I09ec1d7d3801bf8a8277c91072fa09bd1b430809
Signed-off-by: Algea Cao <algea.cao@rock-chips.com>
close pd when suspend, no when plug out because hotplug detect need it.
make hdmi probe before dp otherwise the shared power domain will be
close after dp probe and cause splash screen when starting kernel if
hdmi uboot logo display
Change-Id: I82ba1abdaf7567173df9ad900d57eca0e6be3932
Signed-off-by: Huicong Xu <xhc@rock-chips.com>
Signed-off-by: Algea Cao <algea.cao@rock-chips.com>
HDMI PD is power off when system suspend, so ih_mute register
bit0 mute_all_interrupt will be reset to 1 when system resume.
HPD interrupt will be mask, that would cause hdmi plugin could
not be detected.
Change-Id: I3bf2e6116e902cd516a7ac69fbe8569ca943e853
Signed-off-by: Bin Yang <yangbin@rock-chips.com>
Signed-off-by: Algea Cao <algea.cao@rock-chips.com>
This patch adds support for rockchip codec digital interface,
which is used to communicate with external codec analog part
with pdm link.
Change-Id: I9ea7020d904b63f7a34696b0f538accd8c700076
Signed-off-by: Sugar Zhang <sugar.zhang@rock-chips.com>
ES7210 is a 4-ch ADC with I2S interface for Microphone Array
Replace digital_mute with mute_stream
Change-Id: I71faf344eb8b058349a7a889eae296115cc788c8
Signed-off-by: Binyuan Lan <lby@rock-chips.com>
Signed-off-by: Sugar Zhang <sugar.zhang@rock-chips.com>
ES7243E is 2-ch ADC with I2S interface for Microphone Array
Replace digital_mute with mute_stream
Change-Id: I3c61f5feccad9362e2859d7646e88a0e990c998c
Signed-off-by: Binyuan Lan <lby@rock-chips.com>
Signed-off-by: Sugar Zhang <sugar.zhang@rock-chips.com>
Although stereo transmission, actually only 1ch data,
just to adapt the controller of only support stereo and above.
Change-Id: I0f2d6d1b43954080a980d4e4b8ea8f3ca8207d7b
Signed-off-by: Binyuan Lan <lby@rock-chips.com>
This patch adds driver support for rk3308 codec.
Change-Id: Ieccdebaa27f4a46f6de9406046a6e02e20398013
Signed-off-by: Fenrir Lin <fenrir.lin@rock-chips.com>
This patch adds driver support for rk3228 codec.
Replace digital_mute with mute_stream
Change-Id: Icf83257726f12558cbdde4d4b2876dc8a3123626
Signed-off-by: Sugar Zhang <sugar.zhang@rock-chips.com>
This patch adds driver support for rk1000 codec.
Replace digital_mute with mute_stream
Change-Id: I025415287f8436d5672b8f1f8d81d87c8273772a
Signed-off-by: Sugar Zhang <sugar.zhang@rock-chips.com>
The system tick may be modified by NTP when we connect
with network, then jiffies have an offset compared to
the local clock, it will cause the irq_pos / delta_play /
delta_capt also be inaccurate.
Therefore, we need a way to get raw jiffies which follows
local raw clocks.
Change-Id: I9be1790dfd98e430982dad6f03b04532889279a6
Signed-off-by: Xing Zheng <zhengxing@rock-chips.com>
The disvr usb audio sampling rate is through nanoc reported to
the kernel, so don't need the kernel again set the sampling rate.
Change-Id: I60409fc579952a196c4fe40f678e87d505a7508d
Signed-off-by: wjh <wjh@rock-chips.com>
