Native sdmmc does not use rpm, but we set pm_runtime_force_suspend()
and pm_runtime_force_resume() for sleep PM. pm_runtime_force_*()
will check rpm status, so that the it doesn't call the resume
callback if we didn't increase its usage count.
Another drive-by fix is to de-init rpm once when rpm is used.
Change-Id: Id7ea1ca95c684fb51867fb87c66f8998fc0758a3
Signed-off-by: Shawn Lin <shawn.lin@rock-chips.com>
Add support to disable cqe function if disable-cqe
is assiged by firmware.
Change-Id: Iac2826c4b986c122510af1594c971c4135bafc34
Signed-off-by: Shawn Lin <shawn.lin@rock-chips.com>
Add more ip nodes to rk3368 core dts file, such as iep, vop, ...
Change-Id: Ief8da75765bb84ebe038e9446c782aff3e3a6aed
Signed-off-by: Jianqun Xu <jay.xu@rock-chips.com>
Android 10 requires ion to allocate buffers for audio playback,
enable system heap by default to support it.
Change-Id: I20653e9377c86e4baed295f33a475e49a63f5082
Signed-off-by: Chen Jinsen <kevin.chen@rock-chips.com>
This's what mmc_select_hs400() or mmc_select_hs() did,
since mmc_set_clock() will let sdhci_arasan_set_clock()
update the PHY clock to match the timing, otherwise
the following mmc_switch_status() will be failed.
Change-Id: Ic1a0178ec209ec71d904f7212a84da6665904007
Signed-off-by: Shawn Lin <shawn.lin@rock-chips.com>
It's meaningless to check the card's status which execute
the on-going flush. As the status been responded make no
any sense here.
Change-Id: I34197d1c93c01337dd2e68ec22e3ce8dd195c424
Signed-off-by: Shawn Lin <shawn.lin@rock-chips.com>
* android-4.19: (2854 commits)
ANDROID: move up spin_unlock_bh() ahead of remove_proc_entry()
BACKPORT: arm64: tags: Preserve tags for addresses translated via TTBR1
UPSTREAM: arm64: memory: Implement __tag_set() as common function
UPSTREAM: arm64/mm: fix variable 'tag' set but not used
UPSTREAM: arm64: avoid clang warning about self-assignment
ANDROID: sdcardfs: evict dentries on fscrypt key removal
ANDROID: fscrypt: add key removal notifier chain
ANDROID: refactor build.config files to remove duplication
ANDROID: Move from clang r353983c to r365631c
ANDROID: gki_defconfig: remove PWRSEQ_EMMC and PWRSEQ_SIMPLE
ANDROID: unconditionally compile sig_ok in struct module
Linux 4.19.80
perf/hw_breakpoint: Fix arch_hw_breakpoint use-before-initialization
PCI: vmd: Fix config addressing when using bus offsets
x86/asm: Fix MWAITX C-state hint value
hwmon: Fix HWMON_P_MIN_ALARM mask
tracing: Get trace_array reference for available_tracers files
ftrace: Get a reference counter for the trace_array on filter files
tracing/hwlat: Don't ignore outer-loop duration when calculating max_latency
tracing/hwlat: Report total time spent in all NMIs during the sample
...
Conflicts:
drivers/clk/rockchip/clk-mmc-phase.c
drivers/gpu/drm/rockchip/rockchip_drm_vop.c
drivers/regulator/core.c
drivers/tty/serial/8250/8250_port.c
drivers/usb/dwc3/core.h
drivers/usb/dwc3/gadget.c
drivers/usb/dwc3/gadget.h
Change-Id: I65599d770d6613caba14251b890fcfd1cfa0f100
The pins from GPIO2B0 to GPIO2B6 are located at GRF_GPIO2BL_IOMUX,
they are recalculated to get correct iomux.
Change-Id: I1e46697c4508c396b5e8140c32c4185925a040ea
Signed-off-by: David Wu <david.wu@rock-chips.com>
The usage of slew rate is needed to config it at DTS,
such as:
fast speed: slew-rate = <1>;
slew speed: slew-rate = <0>;
Change-Id: Iefa9c15a35c6c1e94f716f5d6dd7e30d20a7293f
Signed-off-by: David Wu <david.wu@rock-chips.com>
If the gpio IRQ type changes, it is possible to accidentally trigger
an interrupt, such as when the input is high, changed from level to
rise edge. For now, the best way to do this is to disable the INTEN
bit first, then configure the type to stagger this period of time.
Change-Id: I71351b9ed6f7920958c7451c2e51ab5f699875d1
Signed-off-by: David Wu <david.wu@rock-chips.com>
There are writable 32 bits for PMU_GPIO0's iomux, so add the
IOMUX_WRITABLE_32BIT to read iomux register at first, it would
not change others' bits.
Change-Id: I1fb27c60d5d26e5719b6911a78e7cdf144feba26
Signed-off-by: David Wu <david.wu@rock-chips.com>
This adds the necessary data for handling io voltage domains on the rk3308.
As interesting tidbit, the rk3308 contains one iodomain area at grf,
Change-Id: Ife72a284a8926d02ef5df7a422d41924494d0300
Signed-off-by: David Wu <david.wu@rock-chips.com>
The interrupt is requested before the device is powered on and
it's value in some cases cannot be reliable. It happens on some
devices that an interrupt is generated as soon as requested
before having the chance to disable the irq.
Change-Id: I889c069239d005ab0a3fb4eb36123608ec81d9ab
Signed-off-by: Wyon Bi <bivvy.bi@rock-chips.com>
Unable to handle kernel paging request at virtual address
ffffffc000000000
PC is at __dma_flush_range+0x18/0x30
LR is at rga_dma_flush_page+0x40/0x48
Change-Id: I6c15bc60edac042884ad14611485f0380e3bd355
Signed-off-by: Shixiang Zheng <shixiang.zheng@rock-chips.com>
Signed-off-by: Li Huang <putin.li@rock-chips.com>
the driver has a bug in calc of page num when virtual
address may not 4k align
Change-Id: Ifc3759d7a0e8954057e238c714de2059b691f17c
Signed-off-by: Li Huang <putin.li@rock-chips.com>
CVE-2017-0630
This likely breaks tracing tools like trace-cmd. It logs in the same
format but now addresses are all 0x0.
Bug: 34277115
Change-Id: Ifb0d4d2a184bf0d95726de05b1acee0287a375d9
Signed-off-by: Jian Qiu <qiujian@rock-chips.com>
It's safe to disable the link state after EP driver removed
Change-Id: I36f811ad353b7384a792adf7da904442afbe45d6
Signed-off-by: Simon Xue <xxm@rock-chips.com>
Disable ltssm in case of EP auto relink if EP reboot
Change-Id: I08b3dc4426fa3a90bb74b9e3264221fe528f4526
Signed-off-by: Simon Xue <xxm@rock-chips.com>
we only add the property of regulator and clock to cpu0 and cpu4 node,
but if cpu4~cpu7 is down and then we up cpu5~cpu7, they will can not
get their regulator and clock. So we should add the properties to all
cpu node.
Change-Id: Id601fa3d3d05875f7c68f2a5472dc0eefefb6096
Signed-off-by: Feng Xiao <xf@rock-chips.com>
Signed-off-by: Jianqun Xu <jay.xu@rock-chips.com>
From the measured data, the voltage can be reduced a little if pvtm
is greater than 161000.
Change-Id: Icac965ff31d4ed37ae1f40204037a57b7cdf8ba1
Signed-off-by: Finley Xiao <finley.xiao@rock-chips.com>
It is better to make the voltage greater than 810mV and it will be more
stable.
Change-Id: I4f9294a0629a8c3b83e930f0dec20d939130070d
Signed-off-by: Finley Xiao <finley.xiao@rock-chips.com>
