Get num-cs u32 from dts of_node property rather than u16.
Change-Id: I265c8c696f1ff884ce6e7690d9c886a2ed1bd267
Signed-off-by: Jon Lin <jon.lin@rock-chips.com>
After power up, the cs and clock is in default status, and the cs-high
and clock polarity dts property configuration will take no effect until
the calling of rockchip_spi_config in the first transmission.
So preset them to make sure a correct voltage before the the first
transmission comming.
Change-Id: Ib00336a3ebda6e04bdb33c56c7da419bfb6efdd9
Signed-off-by: Jon Lin <jon.lin@rock-chips.com>
RK3568 and RK3588 has the same issue as RV1126/RV1109 that caused by
dte fetch time limit, So we can set BIT(31) of register 0x24 default
to 1 as a workaround.
Change-Id: Ib0d1fd110aa0349145a63f7c4be5ce77ed6ab4e4
Fixes: 7f8158fb41 ("iommu: rockchip: disable fetch dte time limit")
Signed-off-by: Simon Xue <xxm@rock-chips.com>
First we thought the half_block_en bit in AFBCD_CTRL register
only work in afbc mode. But the fact is it control the line buffer
in all mode(afbc/tile/line), so we need configure it in the
all case.
Signed-off-by: Andy Yan <andy.yan@rock-chips.com>
Change-Id: Ib8cd5fbfd0a898eea738423685fbcdc0ab6d00ad
Definition VOP_FEATURE_OUTPUT_RGB10 and VOP_FEATURE_INTERNAL_RGB
are from upstream, so we move our private definition VOP_FEATURE_AFBDC
and VOP_FEATURE_ALPHA_SCALE to other bits.
Signed-off-by: Andy Yan <andy.yan@rock-chips.com>
Change-Id: I44a4f4864bd7d82af120dfe361b9af700d7d8ae9
add and remove some property to compatibility with hwc 2.0
Signed-off-by: Sandy Huang <hjc@rock-chips.com>
Change-Id: I8239ce40e30da6e2be55e0ccfa6748816c0fcf2a
As some property can be used by both of rockchip_drm_vop2.c and rockchip_drm_vop.c,
so we delete some property create at vop2.c and instead by rockchip drm driver
common property.
Signed-off-by: Sandy Huang <hjc@rock-chips.com>
Change-Id: If4f327db79a455da75c7d4af04d2fe3aab19a6f0
Just put runtime suspend synchronously for otg mode at dwc3 probe time.
We found that the USB3.0 HUB which integrated in rk3399-evb-ind board
could not be enumerated at the system boot time, and the reason is
the USB controller has been suspended when the HUB gets ready.
Fixes: d8b7417bea ("usb: dwc3: core: allow pm runtime for rockchip platform")
Signed-off-by: Frank Wang <frank.wang@rock-chips.com>
Change-Id: I19600f327d97cb992994d280645a00069dc9e8d2
Spinand may power off after suspending, so the corresponding resume
process is necessary.
Change-Id: I36c7dbf23877b342dfe9e7fb0c8eb4885bd46d71
Signed-off-by: Jon Lin <jon.lin@rock-chips.com>
According to commit 9bde4e671f ("drm/rockchip: vop: fix iommu crash
with async atomic")
These two callback were added to avoid iommu crash on async
commit caused by drm_atomic_clean_old_fb after drm_atomic_async_commit.
drm_atomic_clean_old_fb was removed after commit
e00fb8564e ("drm: Stop updating plane->crtc/fb/old_fb on atomic drivers")
So we can remove them to make life simpler.
Change-Id: Iea1f2dbadd9bcfad5b8447831c0d31068d4fa97b
Signed-off-by: Andy Yan <andy.yan@rock-chips.com>
We assign window between vp by plane_mask now, no
need to check which vp is activated from register.
Change-Id: I89d22f253dcd26898dc79304d51b8a8d9e802bb2
Signed-off-by: Andy Yan <andy.yan@rock-chips.com>
