PD#SWPL-85
Problem:
print into level control
Solution:
print into level control
Verify:
U212
Change-Id: Ib0fdc02f26e75c20e48171bca5ebef072947d78c
Signed-off-by: jintao xu <jintao.xu@amlogic.com>
PD#TV-2802
Problem:
The image is stuck or blackscrean for a few seconds
when the DTV stream is replayed.
Solution:
when audio pts and video pts discontinue, then
adjust the pcr source clock.
Verify:
X301
Change-Id: Id0a74e2d4106a30b426bfa7a4faa70451db9b79e
Signed-off-by: Xiaoming Sui <xiaoming.sui@amlogic.com>
PD#SWPL-4551
Problem:
ImagePlayer cannot play picture
Solution:
add picdec dev node for u200 u211 u212 w400
Verify:
franklin
Change-Id: I35cc28e2ab06367f33a7326ce671b1ee461e6fb1
Signed-off-by: xi an <an.xi@amlogic.com>
Signed-off-by: Luan Yuan <luan.yuan@amlogic.com>
PD#SWPL-6896
Problem:
In the HF1-31 Iter 03 test, the Rx EDID's max tmds clock is 600MHz,
and it doesn't claim that it supports Y420 modes. But
echo 2160p60hz,420,8bit > /sys/class/amhdmitx/amhdmitx0/valid_mode
'cat valid_mode' will get 1.
Solution:
Add Y420 8bit check
Verify:
G12/U212
Change-Id: I0a128eb33aeb2b4bcbf253eff49e9c5186386af1
Signed-off-by: Zongdong Jiao <zongdong.jiao@amlogic.com>
PD#SWPL-6694
Problem:
home button has no function in sm1-ac200
Solution:
add home button configuration in dst node
Verify:
test pass on sm1-ac200
Change-Id: I670480c6dfd7f833e737adaddbe5981d84091203
Signed-off-by: Yingyuan Zhu <yingyuan.zhu@amlogic.com>
PD#OTT-2452
Problem:
Black screen in the middle of the cut.
Solution:
add keep last frame.
Verify:
on U212
Change-Id: Ib24f066e0682c7427024a74d9bf8cc9b8a310d62
Signed-off-by: renjiang.han <renjiang.han@amlogic.com>
PD#SWPL-3730
Problem:
playback not smooth
Solution:
if p2 lookup fail, set p2 = p
Verify:
verified by x301
Change-Id: I181eae2ba40edd937df12e0925c2a55c856162ba
Signed-off-by: rongrong zhou <rongrong.zhou@amlogic.com>
PD#SWPL-6200
Problem:
emmc calibration delay set error.
Solution:
modify delay_step to 250ps.
Verify:
verify by s912.
Change-Id: I1c0e31ae6bdda8b0f105e12f3efc81b5474376d6
Signed-off-by: Nan Li <nan.li@amlogic.com>
PD#SWPL-5404
Problem:
emmc report data crc error in hs200 busmode
Solution:
set hs200 co_phase to 2 and did not reset the
hs200 co_phase and tx_phase when adjust tuning is
find the error point in sm1
Verify:
verify pass on sm1_s905d3_ac200
Change-Id: I56aa8eb666fb55641db75878a3488f66c721bd6d
Signed-off-by: ruixuan.li <ruixuan.li@amlogic.com>
PD#SWPL-5404
Problem:
sm1 usb fixdiv mode set adjust cause error
Solution:
disable emmc calc_f in dtsi.
Verify:
test pass on sm1 ac200
Change-Id: I4459bf4faa2141a9e684b1e5bb95fb806eecbbfa
Signed-off-by: ruixuan.li <ruixuan.li@amlogic.com>
PD#SWPL-2634
Problem:
eyetest mode is a little unstable
Solution:
adjust the tuning mode of the fixed adj
Verify:
R311
Change-Id: I6112e0078bf013d2a4cfe4ff04210f1d15e3439d
Signed-off-by: long yu <long.yu@amlogic.com>
PD#SWPL-6810
Problem:
android version, no sound for spk
ad82584 is mute in default.
Solution:
un-mute ad82584, and add delay for de-pop
Verify:
ac200
Change-Id: Id78eb77b5e1a0ebed0a16a9b97992c6a07f78cde
Signed-off-by: Xing Wang <xing.wang@amlogic.com>
Signed-off-by: Jian Xu <jian.xu@amlogic.com>
PD#SWPL-3750
Problem:
when debug on, too more log
Solution:
delete
Verify:
verified on android p
Change-Id: Iabaaa4fa205da5453a303c98bce8b71b55c5f77b
Signed-off-by: Yong Qin <yong.qin@amlogic.com>
PD#SWPL-5292
Problem:
g12b-revB, some u disk amldevread test failed.
Solution:
Changing the register 0x54 to 0x2a, enabled the hs rx idle noise filter,
and the abnormal u-disk has no problem in the amldevread test.
Verify:
g12b revB
Change-Id: Ibbf924c93d193d7e40c4d8121a4616a8d1caeaaa
Signed-off-by: he.he <he.he@amlogic.com>
PD#SWPL-6169
Problem:
when resuming and playing hdr films, flash screen will happen
under LG TV
Solution:
quantization range has changed between UI and playing hdr
films. we keep quantization unchanged. Same as MTK.
Verify:
s905x2
Change-Id: I071abecfba705dbd44d33c2673d4938c39f419cf
Signed-off-by: Yi Zhou <yi.zhou@amlogic.com>
PD#TV-1361
Problem:
Add scene change detection for DM (read part),
start from TL1 by VLSI(Zheng.Bao).
Solution:
1. add control in function noise_meter_process;
2. add debug information:
cat /sys/class/deinterlace/di0/nr4_param
3. set NR2_CUE_MODE[11:10] as 3; (by feijun)
Verify:
tl1
Change-Id: Ib34d1b403539ba5fe5135d6608bfa2cf27490826
Signed-off-by: Jihong Sui <jihong.sui@amlogic.com>
PD#SWPL-86
Problem:
Android tensorflow lite ,NN API implementation
Solution:
NN API implementation
Verify:
Local on galilei
Change-Id: I7c1a3a68005218544d0a3c7a7360c9ee38fc53de
Signed-off-by: deng.liu <deng.liu@amlogic.com>
PD#SWPL-6168
Problem:
avb+abupdate with care map.txt cann't boot up
because of check product partition
Solution:
add avb for product partition in dts
Verify:
ampere
Change-Id: I0310853965340d9b810a89cbf1719f9ba002261d
Signed-off-by: Liang Ji <liang.ji@amlogic.com>
PD#SWPL-6179
Problem:
PLAY-AL1-30FPS-HEAAC exist multi short frame every 16.6s
Solution:
Hold one frame in case occur pattern broken. Problem occur as this,
for non-tunnel mode, amlvideo vidioc_dqbuf in omx so fast, then lead
decoder buffer quickly pushed to amlvideo queue with only current frame,
without next frame. Hold one frame we need next frame and next frame pts
after next frame, here we use next frame pts and a crease with duraion
as next next frame pts.
Verify:
verify by u212
Change-Id: Ie98c30791e785abb886aa19a7e930d191f5c2b3e
Signed-off-by: shuanglong.wang <shuanglong.wang@amlogic.com>
PD#SWPL-5975
Problem:
adjust cpufreq table for g12b
Solution:
adjust cpufreq table for g12b
Verify:
test pass on g12b_w400
Change-Id: I037ab2a1718a2aae0f42a15b7d95f163bc77ca85
Signed-off-by: Hong Guo <hong.guo@amlogic.com>
PD#SWPL-6192
Problem:
no sound from av and amp spk
Solution:
1) fix tocodec for sm1
2) add no mclk control for ad82584
Verify:
ac200
Change-Id: I63f0ec94d2f5b980249ac5c9c810c8e4d8410ea3
Signed-off-by: Xing Wang <xing.wang@amlogic.com>
PD#SWPL-6101
Problem:
Need vpp and sr supprt for sm1
Solution:
add support for sm1
Verify:
test pass on sm1 ac200
Change-Id: I038ceba52a0b47512767e851d0047a3ee36e351c
Signed-off-by: Brian Zhu <brian.zhu@amlogic.com>
PD#SWPL-2613
Problem:
sr mux in vpp misc is set incorrectly.
Solution:
move the vpp misc operation together
Verify:
verify by x301
Change-Id: Ie813e5b04b97a4481c2e45bcf0c8b4c065fb9f69
Signed-off-by: Brian Zhu <brian.zhu@amlogic.com>
PD#SWPL-6186
Problem:
add ge2d power control
Solution:
add ge2d power control
Verify:
SM1-AC200 board
Change-Id: I3ea08c4d800f78e5187b6ae334849db02309ce0e
Signed-off-by: Jian Cao <jian.cao@amlogic.com>
PD#SWPL-6186
Problem:
add power control register
Solution:
avoid same register access at the same time
Verify:
sm1_skt
Change-Id: I0ec61cda9721c1b95a9d78f7884458f442581fe5
Signed-off-by: Shunzhou Jiang <shunzhou.jiang@amlogic.com>
Signed-off-by: Luan Yuan <luan.yuan@amlogic.com>
PD#SWPL-5261
Problem:
update chip name.
Solution:
the chip name used for media modules.
Verify:
AC200
Change-Id: I229ca3f991b29fdebf10f98dff5173768b910aaa
Signed-off-by: Nanxin.Qin <nanxin.qin@amlogic.com>
PD#SWPL-5857
Problem:
sm1 is a new chip
Solution:
add sm1 support for vpu driver
Verify:
pxp
Change-Id: I88966a26fb4f8f90620081c4d9a86ad21a6e03fc
Signed-off-by: Evoke Zhang <evoke.zhang@amlogic.com>
PD#SWPL-5380
Problem:
add NN power control
Solution:
add NN power control
Verify:
sm1
Test: pass
Change-Id: I729d782181490fc31b0b18bb27718ad12b3937c0
Signed-off-by: cancan.chang <cancan.chang@amlogic.com>
PD#SWPL-5391
Problem:
change ge2d to independent power
Solution:
add independent power switch
Verify:
verified on SM1-AC200 board
Change-Id: Ifce980fc88753db63317c11bc1126e492b677a64
Signed-off-by: Jian Cao <jian.cao@amlogic.com>
