Its for sensor adapter to sync all of sensor state, to avoid isp getting the wrong state
in the case of app execution order: sensor0 config param -> run isp0 ... sensorn config param -> run ispn
Signed-off-by: Zefa Chen <zefa.chen@rock-chips.com>
Change-Id: I90cc6a1716d5198150b5a0897ada0412622b72d3
According to gki commit d483eed85f ("ANDROID: GKI: set vfs-only exports into their own namespace").
Signed-off-by: Tao Huang <huangtao@rock-chips.com>
Change-Id: Ie75429695e0f23ada39d8677a918e5b1c0b8fd97
Adding uvc attribute "uvc_num_request" to set the number of uvc
requests by configfs, the maximum limit is 64, and the recommended
value is 2.
Signed-off-by: Frank Wang <frank.wang@rock-chips.com>
Change-Id: I6031ba0b569a4ff53e16a59a5bcce021d80823db
This patch add pll frac freq around 1G for audio product,
which will do fine tune pll for async clk situation,
such as BT, UAC.
Because we have no much more PLLs, and much more devices
share the same PLL, so, we should setup around 1G to serve
all the devices.
PLLs in rv1106:
APLL: CPU
DPLL: DDR
GPLL: DEVICES
CPLL: DEVICES
GPLL: 1188MHz
CPLL: 1000MHz
* PLLs support frac mode:
GPLL
DPLL
So, the only way to use audio pll frac freq is to switch to
use GPLL. and switch the role of GPLL and CPLL.
GPLL: audio frac freq (~1G)
CPLL: 1188MHz
Tested by UAC product, so, we first address this. and, of course,
there still have chance apply this to other situation, such as IPC.
but, need more test. at this time, we just handle for UAC.
Signed-off-by: Sugar Zhang <sugar.zhang@rock-chips.com>
Change-Id: Ief13456b6274802836266228d3288d91a148feff
This patch add pll frac freq around 1G for audio product,
which will do fine tune pll for async clk situation,
such as BT, UAC.
Because we have no much more PLLs, and much more devices
share the same PLL, so, we should setup around 1G to serve
all the devices.
PLLs in rv1106:
APLL: CPU
DPLL: DDR
GPLL: DEVICES
CPLL: DEVICES
GPLL: 1188MHz
CPLL: 1000MHz
* PLLs support frac mode:
GPLL
DPLL
So, the only way to use audio pll frac freq is to switch to
use GPLL. and switch the role of GPLL and CPLL.
GPLL: audio frac freq (~1G)
CPLL: 1188MHz
Signed-off-by: Sugar Zhang <sugar.zhang@rock-chips.com>
Change-Id: If26f464ac88cd21195db14084f8b4e9ffb457890
1.Remove the dependence on the linux clock framework
2.Change to use the compatible APIs to get device property
3.Add the necessary device property "clock-frequency" for ACPI
Change-Id: I6b996ad4fba8af8d871633947a9eb6a38b8c8707
Signed-off-by: Jon Lin <jon.lin@rock-chips.com>
Enable CONFIG_CHARGER_SGM41542 used for sgm41542 which found on
rk3588s tablet
Signed-off-by: shengfei Xu <xsf@rock-chips.com>
Change-Id: Ieeeebfe2dde83f40a7589a6fa0418e01ad3433cf
The global structure system_monitor is same as argument from the
function for rockchip_system_monitor_parse_dt, fix to monitor to make
code easy to read.
Signed-off-by: Jianqun Xu <jay.xu@rock-chips.com>
Change-Id: I2e0412e9aac697e34e3cc35e1547e837ae7f69b8
If the clk_get_rate return '0', it will happen division by zero.
Signed-off-by: Jianqun Xu <jay.xu@rock-chips.com>
Change-Id: I1d2c6b12b961a78629f22496fe8f8b685b27dc09
Fix the problem that the kernel cannot match the corresponding resolution
when 1080P is used to force output
Signed-off-by: Lei Chen <lei.chen@rock-chips.com>
Change-Id: I5ccc7ee026d4d68935e91f7d05fa3d21a5b26811
Since meta is enabled, remove unnecessary bootargs.
Signed-off-by: Wang Xiaobin <xb.wang@rock-chips.com>
Change-Id: Ief0a0f9788d2d3c6532d5385595a94f1decc8cf4
rkcif_mipi_lvds1_sditf is a virtual node that is used to link to ISP node.
An error occurs if you do not link to ISP node when stream off.
Signed-off-by: Lin Jinhan <troy.lin@rock-chips.com>
Change-Id: I441de230b7af955ff34af0e88ba8d0f318154cfc
Fixes: 94a5dd9f32 ("arm64: dts: rockchip: add vepu support and separate jpege for rk3588")
Signed-off-by: Yandong Lin <yandong.lin@rock-chips.com>
Change-Id: Idc14891685c81f0103477d264d44a58585756cd5
1. The default_domain is used when the IOMMU device calls dma-buf api,
so it is necessary to save the dev of the main core as the default_dev.
2. The default mapped device will be able to get all the memory
information required by the device.
Signed-off-by: Yu Qiaowei <cerf.yu@rock-chips.com>
Change-Id: I0ed1487dc0bfad65bbb1aafb8d2f31255cc4c9fe
1. set binning output 32 pixel aligned.
2. fix channel info omitted copy from user issue.
Signed-off-by: Wang Panzhenzhuan <randy.wang@rock-chips.com>
Change-Id: Ib67deb7648ac88fc5e9e9b0ab6950d6661f76bcc
This patch add support for property 'rockchip,no-dmaengine'.
it is a boolean property. if present, driver will do not
register pcm dmaengine, only just register dai. if the dai
is part of multi-dais, the property should be present. Please
refer to rockchip,multidais.txt about multi-dais usage.
Change-Id: I9aa2ddb15f5a27202f90bf32804f214435cc0b73
Signed-off-by: Sugar Zhang <sugar.zhang@rock-chips.com>
Signed-off-by: Jason Zhu <jason.zhu@rock-chips.com>
cgc fix to full range output, the range:
cgc(full)->(input: full)cproc(output: full or limit)
Change-Id: Iad7448f75d9c76f62f063673d8d5780a44d7ea3d
Signed-off-by: Cai YiWei <cyw@rock-chips.com>
Traverse fixed pdos to calculate the maximum power that the charger
can provide, and it can be get by POWER_SUPPLY_PROP_INPUT_POWER_LIMIT
property.
Signed-off-by: Frank Wang <frank.wang@rock-chips.com>
Change-Id: I3533beaa2eb2482de371c271db3f601d50e1be73
Not to do flush in iova_dump(), and drop to dump the rcache.
Fixes: 0c51523b06 ("iommu/iova: dump iova when alloc failed")
Signed-off-by: Jianqun Xu <jay.xu@rock-chips.com>
Change-Id: Iab4a923960d4aace0645d5276705b47dc00ebeea
