Set dwc3_0 in peripheral only mode until Type-C function is
ready, and then we can set dwc3_0 in drd mode.
Change-Id: I0ccb92db97244d7a34dd17c58757fc5aa1b11dac
Signed-off-by: Wu Liang feng <wulf@rock-chips.com>
This reverts commit 0b622df349.
arm pmu driver do not support PPI in two
cluster well. So drop it.
Change-Id: I69f43ad1703589805c7e86749badda8bf802d51a
When rk_iommu_attach_device or rk_iommu_detach_device be called, the second
parameter "dev" represent the device who own the iommu, so it is not resonable
using "dev" for devm_request_irq's first parameter. To avoid potential error,
we must use iommu device itself "iommu->dev" instead, the same as devm_free_irq.
Change-Id: Id9f4097d6f1b916308475854dcf75ce86d9494fc
Signed-off-by: Simon <xxm@rock-chips.com>
1. Add a new compatible for rk3399;
2. Support gpio operation for vbus-drv.
Change-Id: I2eb1ac377db0bcb907d009c56fba22f1951c128e
Signed-off-by: Frank Wang <frank.wang@rock-chips.com>
On some systems regulators need to do special actions on suspend/resume.
These get set from the generic regulator_suspend_prepare and
regulator_suspend_finish functions so these should be called from the
psci suspend ops as well.
Change-Id: I6fbf7b39ceae936ed5bd9df6719ccd3cd360840f
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Shengfei xu <xsf@rock-chips.com>
RK3399 dwc3 has some hardware properties, which is platform
dependent, including the following properties:
1. Set PHYIF to 1 to use 16-bit UTMI+ interface;
2. Clear ENBLSLPM to 0 to disable sleep and l1 suspend;
3. Clear U2_FREECLK_EXITSTS to 0;
4. Clear DEV_FORCE_20_CLK_FOR_30_CLK to 0;
5. Clear DELAYP1TRANS to 0;
Change-Id: I85de326e3c2177c66966f1239bcab838df01492d
Signed-off-by: Wu Liang feng <wulf@rock-chips.com>
Add a quirk to clear the GUSB3PIPECTL.DELAYP1TRANS bit,
which specifies whether delay PHY power change from P0
to P1/P2/P3 when link state changing from U0 to U1/U2/U3
respectively.
Change-Id: I23e33f8b13001d6f86d6473ad43a261d9bda8f79
Signed-off-by: Wu Liang feng <wulf@rock-chips.com>
Fix add critical clock for PMUCRU too late in the rk3399_clk_init. It
will be crash if there is one clock want to disable its parent which is
the PPLL.
Change-Id: I3fa236ab78571c8c8ec5d423228d00dbb02f24e6
Signed-off-by: Xing Zheng <zhengxing@rock-chips.com>
this patch corrects the interface adc/dac control register definition
according to datasheet.
Change-Id: I0777577d365140b642141596112b662d3a80538b
Signed-off-by: Sugar Zhang <sugar.zhang@rock-chips.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Cc: stable@vger.kernel.org
(cherry picked from git.kernel.org broonie/sound.git for-next
commit 653aa46452)
In order to lower the temperature, lower the voltage.
Change-Id: Iae2d103c88ab5b72c3d003c1f84f74e1694c7e1e
Signed-off-by: Finley Xiao <finley.xiao@rock-chips.com>
PPLL is 8 and redefined by SCLK_I2C4_PMU, and clock IDs shouldn't be 0.
Change-Id: I50f89487034c1f1ef41d257de00b7f3ec53f7f4c
Signed-off-by: Xing Zheng <zhengxing@rock-chips.com>
Add snps,phyif_utmi_16_bits devicetree property. USB2 phy
interface is hardware property, and it's platform dependent,
so we need to configure it in devicetree to set the core to
support a UTMI+ PHY with an 8- or 16-bit interface.
And according to dwc3 databook, the GUSB2PHYCFG.USBTRDTIM
must set to the required values for the usb2 phy interface.
Change-Id: If1c636edc6be3c9a79b4b0b89737a925d8dd3abe
Signed-off-by: Wu Liang feng <wulf@rock-chips.com>
Add a quirk to clear the GUSB2PHYCFG.U2_FREECLK_EXISTS bit,
which specifies whether the USB2.0 PHY provides a free-running
PHY clock, which is active when the clock control input is active.
Change-Id: I84ea6eeccb9fc2ea6d13ef586f1166d5fa132606
Signed-off-by: Wu Liang feng <wulf@rock-chips.com>
* linux-linaro-lsk-v4.4-android: (477 commits)
arm64: vdso: Mark vDSO code as read-only
ARM/vdso: Mark the vDSO code read-only after init
x86/vdso: Mark the vDSO code read-only after init
lkdtm: Verify that '__ro_after_init' works correctly
arch: Introduce post-init read-only memory
x86/mm: Always enable CONFIG_DEBUG_RODATA and remove the Kconfig option
mm/init: Add 'rodata=off' boot cmdline parameter to disable read-only kernel mappings
asm-generic: Consolidate mark_rodata_ro()
Linux 4.4.6
ld-version: Fix awk regex compile failure
target: Drop incorrect ABORT_TASK put for completed commands
block: don't optimize for non-cloned bio in bio_get_last_bvec()
MIPS: smp.c: Fix uninitialised temp_foreign_map
MIPS: Fix build error when SMP is used without GIC
ovl: fix getcwd() failure after unsuccessful rmdir
ovl: copy new uid/gid into overlayfs runtime inode
userfaultfd: don't block on the last VM updates at exit time
powerpc/powernv: Fix OPAL_CONSOLE_FLUSH prototype and usages
powerpc/powernv: Add a kmsg_dumper that flushes console output on panic
powerpc: Fix dedotify for binutils >= 2.26
...
set clk_cpul:816M clk_cpub:1008M when clk tree init
Change-Id: I8f493ce8479fc670aa05d651db5be354d6870c98
Signed-off-by: Elaine Zhang <zhangqing@rock-chips.com>
With this defconfig which inherits from rockchip_defconfig,
ChromeOS boots up to command line.
Change-Id: I646fea9b26d9c235da16d0d2b559290ee5029a12
Signed-off-by: ZhengShunQian <zhengsq@rock-chips.com>
1. Compatible "rockchip,rk3399-usb-phy" support to RK3399;
2. Add host_drv_gpio optional property for usb2.0 vbus control.
Change-Id: Idfc6898ca2c519c46dae66d396f501b38e8d73bd
Signed-off-by: Frank Wang <frank.wang@rock-chips.com>
Rockchip USB3.0 core wrapper consist of USB3.0 IP from Synopsys
(SNPS) and HS, SS PHY's control and configuration registers.
Change-Id: I116b66c3b417cfecc968414db9912813a0ef2c5d
Signed-off-by: Wu Liang feng <wulf@rock-chips.com>
To make android platform iommu work well, we need a unified compatible
name to match the new iommu definition in dtsi
Change-Id: Ied581653e1261fd0a21577f4e9ce3b915af135cd
Signed-off-by: Simon <xxm@rock-chips.com>
The rk3288, rk3368 and rk3366 have the same physical dsi id 0x3133302A,
so do not need to get dsi host id.
Change-Id: I0de1e9b7c0250b37ffdc2c39155c5f16afb48956
Signed-off-by: xubilv <xbl@rock-chips.com>
Assign rates for aclk_bus and aclk_peri according to our original design.
Change-Id: Iab4961d485421151be5dbdacf6929800150ab342
Signed-off-by: Feng Xiao <xf@rock-chips.com>
add 1296MHz, 1104MHz and 216MHz to the cpuclk_rate_table list
Change-Id: I1ea7ee432b7c69b89cb3c11a74e67d9d6af1a5dd
Signed-off-by: Feng Xiao <xf@rock-chips.com>
