PD#SWPL-2114
Problem:
When change audio channel count on VG-877, the subpkts of skipped
middle channels are still carried, thus causing afifo overflow
Solution:
When afifo overflow, then store all audio subpkts(8ch)
into afifo, and output 8ch audio from afifo
Verify:
R321
Change-Id: I4b0933935d3a1aed20be10a7a8d3fe23c3a39323
Signed-off-by: Hang Cheng <hang.cheng@amlogic.com>
PD#SWPL-8231
Problem:
When HDMI cable plugin, the SDA may hold low forever or for short time.
Solution:
Add sw_reset_flt reset to resolve hold low forever issue
Verify:
G12/Dongle
Change-Id: I53bbf704bb48a2cd3cc2ebef1444c69ad1623e87
Signed-off-by: Zongdong Jiao <zongdong.jiao@amlogic.com>
PD#SWPL-13664
Problem:
when open some special UI app, DI will have a lot of timeout,
this cause display abnormal.
Solution:
add retry after timeout;
Verify:
tl1
Change-Id: I3316252577bad218256651ebbc6d4fd8b25acb12
Signed-off-by: Jihong Sui <jihong.sui@amlogic.com>
PD#SWPL-12002
Problem:
pause and plug out/in hdmi tx, display abnormal
Solution:
add condition for switch to EI in de_post_process
ref to IPTV's project
Verify:
G12A
Change-Id: I6230464c308660c62199aa24ad5843e7c7bd070d
Signed-off-by: Jihong Sui <jihong.sui@amlogic.com>
PD#SWPL-13223
Problem:
there is a white line on left when crop left is odd
Solution:
set post mif phase to 8;
Verify:
TL1
Change-Id: Ic39e15f5c1d07e756ecc4909366af35d1472dc29
Signed-off-by: Jihong Sui <jihong.sui@amlogic.com>
PD#SWPL-11555
Problem:
there is jaggy in the seek process
Solution:
add condition for recycle mirror buf
Verify:
TL1
Change-Id: I13c17fd78386ef2cb5f44b4e8c33be3fa92e31e2
Signed-off-by: Jihong Sui <jihong.sui@amlogic.com>
PD#SWPL-12404
Problem:
red and green stripes dividing line flash black line
Solution:
close cue(422/444) except local play(420)
VLSI-yanling suggest
Verify:
TL1
Change-Id: Ied1554d6a0e64e00aea1e692ab6b405f87387095
Signed-off-by: Jihong Sui <jihong.sui@amlogic.com>
PD#SWPL-10064
Problem:
Prepare for adding multi-di
Solution:
1. add di_local for reserved mem alloc;
2. add dil_attach_ext_api for di_api;
3. move some setting to prob;
4. add interface for di pq;
Verify:
U212
Change-Id: I023694dffabed47fd62ec3fa90b8de9302ac341e
Signed-off-by: Jihong Sui <jihong.sui@amlogic.com>
Conflicts:
MAINTAINERS
PD#TV-8024
Problem:
abnormal display in small window.
Solution:
turn off afbc temporary.
Verify:
tl1
Change-Id: I6f863330ed9261ef00b0d1c7bdeaa341a9aaa2ca
Signed-off-by: Jihong Sui <jihong.sui@amlogic.com>
PD#SWPL-11389
Problem:
PQ need work around for 1080i(based on VLSI's suggestions)
co-work with yanling/mingliang
Solution:
add pulldown information to vframe;
u32 di_pulldown:
-bit 3: interlace
-bit 2: flmxx
-bit 1: flm22
-bit 0: flm32
Verify:
TL1
Change-Id: I9ff06ffa7aaa9516a3e64cec9768272499678fd5
Signed-off-by: Jihong Sui <jihong.sui@amlogic.com>
PD#SWPL-15631
Problem:
There is an error in
c62207ef53
Solution:
correct the err
Verify:
SM1
Change-Id: If645ee88533dab7e28ff95d578be019a2cb894a6
Signed-off-by: yao liu <yao.liu@amlogic.com>
PD#SWPL-14902
Problem:
Play HDR video locally, after exiting, the screen flashes 1, 2 seconds
Solution:
set rdma_hdr_delay default value to 0
Verify:
Verified by T962-P321
Change-Id: I9c0a56332e38d1238129e682535f588104faf8be
Signed-off-by: Pengcheng Chen <pengcheng.chen@amlogic.com>
PD#SWPL-14256
Problem:
When ATV Mode has no signal
the bright line interference at the bottom
if freescale height is set to vinfo height
Solution:
modify VPP_OSD_SC_DUMMY_DATA alpha value
Verify:
verified on txlx-r311
Change-Id: I48bbb1be533a88e8b3c622550a0a2e8c07f2a863
Signed-off-by: Cao Jian <jian.cao@amlogic.com>
PD#TV-6994
Problem:
When ATV Mode has no signal
the bright line interference at the bottom
Solution:
modify VPP_OSD_SC_DUMMY_DATA alpha value
Verify:
verified on txlx-r311
Change-Id: Icc5039f80bd794ed5adb98e22fbf41f52758ef83
Signed-off-by: Jian Cao <jian.cao@amlogic.com>
PD#SWPL-11936
Problem:
set screen position frequently
frame flashes white stripes
Solution:
modify threshold for updating all registers
on vsync coming
Verify:
Verfied on u212
Change-Id: Iac1ec8b5ec36809d5f5ffe2fe8e79c182e9c126b
Signed-off-by: Cao Jian <jian.cao@amlogic.com>
PD#SWPL-6631
Problem:
dv certification need osd blend bypass
Solution:
add osd blend bypass function
Verify:
verified on tm2 t96e2
Change-Id: I91ba9c622aacc7bc9ad657105fd5e53a3cee595b
Signed-off-by: yao liu <yao.liu@amlogic.com>
PD#SWPL-11431
Problem:
black screen on 4k60hz
display abnormal on 1080p24hz/1080i/576p/480p
Solution:
1.Adjust potch according to resolution
2.Add tm2 in is_graphics_output_off
3.Move osd sc to the back of core2
Verify:
Verified on TM2
Change-Id: Ida1b4a67b3a7233d3a03b0536d246a0bd677e90c
Signed-off-by: yao liu <yao.liu@amlogic.com>
PD#SWPL-10952
Problem:
osd for 4k native UI
Solution:
modify u32 to u64 for left-shift
Verify:
verified on g12b-w400
Change-Id: I9e98e3b5769d61132570f3f4bb1f47694cffde8f
Signed-off-by: Cao Jian <jian.cao@amlogic.com>
PD#SWPL-11388
Problem:
rdma not support multi reg trace
Solution:
add rdma multi reg trace function
Verify:
verify by g12b w400
Change-Id: I74496e11f85af5f2e9aa99108dfc5842eb98d9fc
Signed-off-by: Pengcheng Chen <pengcheng.chen@amlogic.com>
PD#SWPL-7636
Problem:
update dvfs voltage and pwm for g12b revb
Solution:
update dvfs voltage and pwm for g12b revb
Verify:
update dvfs voltage and pwm for g12b revb
Change-Id: I29deea791126fcb1819be380ed81bc2aa29eeec6
Signed-off-by: Hong Guo <hong.guo@amlogic.com>
PD#TV-9668
Problem:
After cpu idle enabled, watch point event register will be cleared
if cpu exit pm(idle). This will cause watch point can't work.
Solution:
re-enable watch point after cpu exit pm(idle)
Verify:
TL1
Change-Id: I4fc2002eaabecd4c5e60a5916bc29e0107882bec
Signed-off-by: Tao Zeng <tao.zeng@amlogic.com>
PD#SWPL-5564
Problem:
When open VMAP for kernel stack, if we meet kernel panic log, we
can't know physical address of stack and hard to debug.
Solution:
Print pfn for register in vmalloc range
Verify:
p212
Change-Id: Iee120df1feab88e412ef63e87c2e2bb4ad0645fb
Signed-off-by: Tao Zeng <tao.zeng@amlogic.com>
PD#SWPL-15010
Problem:
Crash if keep executing echo w > /proc/sysrq-trigger
on android platform
Solution:
Add necessary checking for the fp to be dereferenced in
dump_backtrace_entry with VMAP stack enabled
Verify:
U212
Change-Id: I69d8d7353cf99a71dc3e7640efa1d460ef2f5f9a
Signed-off-by: Jiamin Ma <jiamin.ma@amlogic.com>
PD#SWPL-13243
Problem:
pmu event is not accurate or not complete in A53/A55/A73.
Solution:
1, modify event config for A53/A55/A73.
2, perf executable file must compiled from latest kernel(5.1+)
3, A55 events are most complete, A73 are least complete(eg: less ld_retired/st_retired/stall/prefetch events)
4, A55/A53 same event meanings simlar, but A73 is more different(eg: L1/L2 dcache/icache loads meanings)
sample commands:
a55 arm64:
perf stat -e task-clock,context-switches,cpu-migrations,page-faults,instructions,armv8_pmuv3/ld_retired/,armv8_pmuv3/st_retired/,cycles,branch-loads,branch-load-misses,armv8_pmuv3/a55_l1d_cache_rd/,armv8_pmuv3/a55_l1d_cache_refill_rd/,armv8_pmuv3/a55_l1d_cache_wr/,armv8_pmuv3/a55_l1d_cache_refill_wr/,L1-icache-loads,L1-icache-load-misses,armv8_pmuv3/a55_l2d_cache_rd/,armv8_pmuv3/a55_l2d_cache_refill_rd/,armv8_pmuv3/a55_l1d_cache_refill_inner/,armv8_pmuv3/a55_l1d_cache_refill_outer/,armv8_pmuv3/a55_l1d_cache_refill_prefetch/,armv8_pmuv3/a55_l2d_cache_refill_prefetch/,armv8_pmuv3/a5x_stall_frontend_cache/,armv8_pmuv3/a5x_stall_frontend_tlb/,armv8_pmuv3/a5x_stall_backend_ld/,armv8_pmuv3/a55_stall_backend_ld_cache/,armv8_pmuv3/a55_stall_backend_ld_tlb/,armv8_pmuv3/a5x_stall_backend_st/,armv8_pmuv3/a5x_stall_backend_ilock_agu/,armv8_pmuv3/a5x_stall_backend_ilock_fpu/ ls
a53 arm64:
perf stat -e task-clock,context-switches,cpu-migrations,page-faults,instructions,armv8_pmuv3/ld_retired/,armv8_pmuv3/st_retired/,cycles,branch-loads,branch-load-misses,armv8_pmuv3/l1d_cache/,armv8_pmuv3/l1d_cache_refill/,L1-icache-loads,L1-icache-load-misses,armv8_pmuv3/a5x_l2d_cache/,armv8_pmuv3/a5x_l2d_cache_refill/,armv8_pmuv3/a53_cache_refill_prefetch/,armv8_pmuv3/a53_scu_snooped/,armv8_pmuv3/a5x_stall_frontend_cache/,armv8_pmuv3/a5x_stall_frontend_tlb/,armv8_pmuv3/a5x_stall_backend_ld/,,armv8_pmuv3/a5x_stall_backend_st/,armv8_pmuv3/a5x_stall_backend_ilock_agu/,armv8_pmuv3/a5x_stall_backend_ilock_fpu/ ls
a73 arm64: (w400 bind to a73 cpu2)
perf stat -e task-clock,context-switches,cpu-migrations,page-faults,instructions,cycles,branch-loads,branch-load-misses,armv8_pmuv3/l1d_cache/,armv8_pmuv3/l1d_cache_refill/,armv8_pmuv3/a55_l1d_cache_rd/,armv8_pmuv3/a55_l1d_cache_wr/,armv8_pmuv3/a5x_l2d_cache/,armv8_pmuv3/a5x_l2d_cache_refill/,armv8_pmuv3/a55_l2d_cache_rd/,armv8_pmuv3/a55_l2d_cache_wr/ busybox taskset 4 ls
a55 arm:
perf stat -e task-clock,context-switches,cpu-migrations,page-faults,instructions,armv7_cortex_a15/ld_retired/,armv7_cortex_a15/st_retired/,cycles,branch-loads,branch-load-misses,armv7_cortex_a15/a55_l1d_cache_rd/,armv7_cortex_a15/a55_l1d_cache_refill_rd/,armv7_cortex_a15/a55_l1d_cache_wr/,armv7_cortex_a15/a55_l1d_cache_refill_wr/,L1-icache-loads,L1-icache-load-misses,armv7_cortex_a15/a55_l2d_cache_rd/,armv7_cortex_a15/a55_l2d_cache_refill_rd/,armv7_cortex_a15/a55_l1d_cache_refill_inner/,armv7_cortex_a15/a55_l1d_cache_refill_outer/,armv7_cortex_a15/a55_l1d_cache_refill_prefetch/,armv7_cortex_a15/a55_l2d_cache_refill_prefetch/,armv7_cortex_a15/a5x_stall_frontend_cache/,armv7_cortex_a15/a5x_stall_frontend_tlb/,armv7_cortex_a15/a5x_stall_backend_ld/,armv7_cortex_a15/a55_stall_backend_ld_cache/,armv7_cortex_a15/a55_stall_backend_ld_tlb/,armv7_cortex_a15/a5x_stall_backend_st/,armv7_cortex_a15/a5x_stall_backend_ilock_agu/,armv7_cortex_a15/a5x_stall_backend_ilock_fpu/ ls
a53 arm:
perf stat -e task-clock,context-switches,cpu-migrations,page-faults,instructions,armv7_cortex_a15/ld_retired/,armv7_cortex_a15/st_retired/,cycles,branch-loads,branch-load-misses,armv7_cortex_a15/l1d_cache/,armv7_cortex_a15/l1d_cache_refill/,L1-icache-loads,L1-icache-load-misses,armv7_cortex_a15/a5x_l2d_cache/,armv7_cortex_a15/a5x_l2d_cache_refill/,armv7_cortex_a15/a53_cache_refill_prefetch/,armv7_cortex_a15/a53_scu_snooped/,armv7_cortex_a15/a5x_stall_frontend_cache/,armv7_cortex_a15/a5x_stall_frontend_tlb/,armv7_cortex_a15/a5x_stall_backend_ld/,armv7_cortex_a15/a5x_stall_backend_st/,armv7_cortex_a15/a5x_stall_backend_ilock_agu/,armv7_cortex_a15/a5x_stall_backend_ilock_fpu/ ls
a73 arm: (w400 bind to a73 cpu2)
perf stat -e task-clock,context-switches,cpu-migrations,page-faults,instructions,cycles,branch-loads,branch-load-misses,armv7_cortex_a15/l1d_cache/,armv7_cortex_a15/l1d_cache_refill/,armv7_cortex_a15/a55_l1d_cache_rd/,armv7_cortex_a15/a55_l1d_cache_wr/,armv7_cortex_a15/a5x_l2d_cache/,armv7_cortex_a15/a5x_l2d_cache_refill/,armv7_cortex_a15/a55_l2d_cache_rd/,armv7_cortex_a15/a55_l2d_cache_wr/ busybox taskset 4 ls
Verify:
ac200/u200/w400
Change-Id: I7f11e1480c3c27d016b011d2a84c33e824f69b08
Signed-off-by: Hanjie Lin <hanjie.lin@amlogic.com>
PD#OTT-2730
Problem:
1.BT open fail;
2.the problem is caused by Flow Control;
Solution:
1.set host cts pull-down as default on the dts.
Verify:
Galilei.
Change-Id: I42aa3bfa263d4330219268622bce94bfc24ced8a
Signed-off-by: Kuibao Zhang <kuibao.zhang@amlogic.com>
PD#SWPL-1856
Problem:
refactored irblaster code
Solution:
1. Refactor the code according to the core, provider, and consumer
frameworks.
2. Provide software encode to let irblaster work according to different
protocols
3. Provide a unified consumer interface to allow other consumer drivers
to use irblaster.
Verify:
test pass on g12a_u200_v1
Change-Id: Ifd841ef0ed741b7fd721defc25691744ea2103f0
Signed-off-by: Bichao Zheng <bichao.zheng@amlogic.com>
PD#SWPL-14953
Problem:
commit: 64ef52a0160d33a2aa88eff05a373bafc6d8637d
arm64 dts set err.
Solution:
modify it.
Verify:
sm1_ac200
Change-Id: Ida45806ec2232435d9d7b40f5286a46528f8ab73
Signed-off-by: Nan Li <nan.li@amlogic.com>
PD#SWPL-14953
Problem:
SD card 3.0 mode requires power cycle.
if not, the initialization of SD card will be affected.
Solution:
add SD power cycle supported.
Verify:
sm1_ac200
Change-Id: Ic8aecadf3b63660adb74ff4ecf0a5d38037b579f
Signed-off-by: Nan Li <nan.li@amlogic.com>
PD#SH-986
Problem:
nn module and usb module confilct
Solution:
add a label in galcore
Verify:
s905d3 w400
Change-Id: I3f5b8738aa8924c7a292fc1da6dda1d2002a77ae
Signed-off-by: "cancan.chang" <cancan.chang@amlogic.com>
PD#SWPL-5395
Problem:
sm1 support double-edge trigger, current code do not support.
Solution:
add relatvie bitmask to support this function.
Verify:
ptm & sm1_skt
Change-Id: I48ebc9b38db868f946c49b6fd5f98d427b2669df
Signed-off-by: Qianggui Song <qianggui.song@amlogic.com>
