To dump internal LSP and endpoint state debug registers, we must write
to GDBGLSPMUX register. This patch correctly dump LSP and endpoint
states from the debug registers.
If the controller is in device mode, all LSP and endpoint state
registers will be dumped via the debugfs attribute "lsp_dump". In host
mode, the user has to write the LSP number to "lsp_dump" to dump a
specific LSP selection.
Change-Id: I0d60a8af46b6dbdd2193ace7608ecddb41316a99
Fixes: 80b776340c ("usb: dwc3: Dump LSP and BMU debug info")
Signed-off-by: Thinh Nguyen <thinhn@synopsys.com>
Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
Signed-off-by: William Wu <william.wu@rock-chips.com>
(cherry picked from commit 62ba09d6bb)
TxFIFO and RxFIFO from GDBGFIFOSPACE are fifo depths in MDWIDTH. Convert
them into bytes for easier read.
Change-Id: I79f6a64dd08bd7bc59a8aecf8897cffb7b8a440e
Signed-off-by: Thinh Nguyen <thinhn@synopsys.com>
Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
Signed-off-by: William Wu <william.wu@rock-chips.com>
(cherry picked from commit 0f874f79dc)
The Tx/RxFIFO types in the GDBGFIFOSPACE.FIFO_QUEUE_SELECT are not
queue. Properly rename them.
Change-Id: I553dfda6b5c24d7db1f81c7b2e093b69fbcf8ea9
Signed-off-by: Thinh Nguyen <thinhn@synopsys.com>
Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
Signed-off-by: William Wu <william.wu@rock-chips.com>
(cherry picked from commit 2c85a1817e)
This adds the necessary data for handling efuse on the rk1808.
Change-Id: I78b66db1fdc22430ab93b07ad3c7cea3355a7f6e
Signed-off-by: Liang Chen <cl@rock-chips.com>
This adds the necessary data for handling efuse on the rk3128.
Change-Id: Ieda973675ff959b3157bb4afe6e1dcdfac65506c
Signed-off-by: Liang Chen <cl@rock-chips.com>
This adds the necessary data for handling secure efuse on the rk3288.
Need to use secure interface to access efuse when kernel is in no-secure
mode.
Change-Id: I1979f23ed8f85c9eb248de276b32adcbb165bd79
Signed-off-by: Finley Xiao <finley.xiao@rock-chips.com>
This adds the necessary data for handling efuse on the rk3368.
As efuse of rk3368 is secure, use secure interface to access efuse.
Change-Id: I72c29348b7744b232d75ab51c56dc7de0988c24e
Signed-off-by: Finley Xiao <finley.xiao@rock-chips.com>
We will add a avs driver to adjust opp's voltage according to leakage.
As it need register a notifier before cpufreq starts, and make cpufreq
defer probe is probably not really easy, so avs should probe earlier
than cpufreq, efuse should probe earlier than avs.
Change-Id: I817aa44c3b34d2fdf44148e6b9649ceed76d8f1f
Signed-off-by: Finley Xiao <finley.xiao@rock-chips.com>
modify the rk808 max steps for increase voltage of Buck1/2,
equal 25mv.
Change-Id: Ic6c016e99ce67f5773d5f5df0b65fa1de10f557a
Signed-off-by: Elaine Zhang <zhangqing@rock-chips.com>
New driver only support DRP mode without swap function.
Swap function will be added in later.
Change-Id: I7e0c2c424def069d4be78c3bc8f704c3f7e5be48
Signed-off-by: Zain Wang <wzz@rock-chips.com>
CACHE_L2X0/TWD/ARM_GLOBAL_TIMER are only available on Cortex-A9.
DW_APB_TIMER_OF only use on rk3066a.
Change-Id: Ied2f49b5d308e961ce5af72eb577aac23e3eb890
Signed-off-by: Tao Huang <huangtao@rock-chips.com>
256KB alignment is not work for (textofs & 0xf0000) > 0x40000.
Change to 1MB.
Change-Id: I9803b22d7d64a244842dcc811e47e214d247fc0c
Signed-off-by: Tao Huang <huangtao@rock-chips.com>
Add simple read only driver for the OTP (One Time Programmable)
memory found on Rockchip SoCs.
Change-Id: I01c63dcacaf471ed7d06e0e8263a14e29af7fb0e
Signed-off-by: Finley Xiao <finley.xiao@rock-chips.com>
The main description for rk3308b is as follows:
- Old iomux multiplexing extension;
- GRF_SOC_CON5 register add some bits;
- Newly added GRF_SOC_CON13/15 register.
Change-Id: I94bfcae5387aceae14895f1cafa0bfea51bf8b63
Signed-off-by: David Wu <david.wu@rock-chips.com>
Signed-off-by: Andy Yan <andy.yan@rock-chips.com>
The most pins of rk3308 are 2bits iomux, but the banks's register
width is 0x8.
Change-Id: I3305810b3f75febd6ec7a933b65e3c9d50f003dd
Signed-off-by: David Wu <david.wu@rock-chips.com>
Signed-off-by: Andy Yan <andy.yan@rock-chips.com>
According to the dwc2 programmer's guide v3.10a, in '2.1.3.2 Dedicated
FIFO Mode with No Thresholding', it suggested that:
Device RxFIFO =
- Scatter/Gather DMA mode:
(4 * number of control endpoints + 6) + ((largest USB packet used / 4) +
1 for status information) + (2 * number of OUT endpoints) + 1 for Global NAK
on rockchip platforms:
(4 * 1 + 6) + ((1024 / 4) + 1) + (2 * 6) + 1 = 280
- Slave or Buffer DMA mode:
(5 * number of control endpoints + 8) + ((largest USB packet used / 4) +
1 for status information) + (2 * number of OUT endpoints) + 1 for Global NAK
on rockchip platforms:
(5 * 1 + 8) + ((1024 / 4) + 1) + (2 * 6) + 1 = 283
Device IN Endpoint TxFIFO =
The TxFIFO must equal at least one MaxPacketSize (MPS).
In addition to RxFIFO and TxFIFOs, refer to dwc2 databook v3.10a,
'Figure 2-13 Device Mode FIFO Address Mapping and AHB FIFO Access Mapping
(Dedicated FIFO)', it required that when the device is operating in non
Scatter Gather Internal DMA mode, the last locations of the SPRAM are used
to store the DMAADDR values for each Endpoint (1 location per endpoint).
When the device is operating in Scatter Gather mode, then the last locations
of the SPRAM store the Base Descriptor address, Current Descriptor address,
Current Buffer address, and status quadlet information for each endpoint
direction (4 locations per Endpoint). If an Endpoint is bidirectional , then
4 locations will be used for IN, and another 4 for OUT).
Considering that the total FIFO size of dwc2 otg is 0x3cc (972),
and we must reserve (4 * 13) = 52 locations for all Endpoints.
So reconfig dwc2 device fifo size as follows:
Device RxFIFO = 280
Device IN Endpoint TxFIFO
- FIFO #0 = (64 / 4) = 16 (Assuming this is used for EP0)
- FIFO #1 = (1024/4) = 256 (Assuming this is used for Isochronous)
- FIFO #2 = (512/4) = 128
- FIFO #3 = (512/4) = 128
- FIFO #4 = (256/4) = 64
- FIFO #5 = (128/4) = 32
- FIFO #6 = (64/4) = 16
After reconfig the dwc2 device fifo size, test mtp write on rockchip
platform (PC -> rockchip platform) on rk312x/rk3326/px30/rk3288 evb,
when mask the 'vfs_write' in f_mtp.c, the writing data rate can be
increased from 16MBps ~ 20MBps to 30MBps ~ 36MBps on different kinds
of rockchip evbs.
Change-Id: Icdf8a5dd95f96d174233e4ffc765c9a982b9f0b6
Signed-off-by: William Wu <william.wu@rock-chips.com>
Single entry is for target voltage and three entries are for
<target min max> voltages. Change cpu opp-microvolt form one entry to
three entries and set maximum acceptable voltage to a high value so that
regulator device can supply multiple consumers at the same time.
Fixes: 16e9353f89 ("arm: dts: rockchip: Change cpu opp-microvolt form one entry to three")
Change-Id: I96e5f87f2945e63e8f4a073fa0292f001830b13c
Signed-off-by: Finley Xiao <finley.xiao@rock-chips.com>
The vdd_logic is a pwm regulator. Since '#pwm-cells = <2>', there
is not polarity invert support by pwm driver, so we have to add
property 'pwm-dutycycle-range = <100 0>' to support polarity invert
by pwm regulator driver itself.
Change-Id: Ie5d2cda67ce19dc792f96263836bab658d385681
Signed-off-by: Joseph Chen <chenjh@rock-chips.com>
Add supports-emmc for emmc; supports-sd for sdcard; supports-sdio for
wifi.
Change-Id: I13d3918f41f63ed9b27e9969e6f89d1006c9d45c
Signed-off-by: Chris Zhong <zyw@rock-chips.com>
Serial Flash controller is used to control the data
transfer between this SoC and a serial nor or nand
flash device.
Change-Id: Ibe7c8c4a11410287c34c1a7dc5b232b330ee6751
Signed-off-by: Randy Li <randy.li@rock-chips.com>
The vpu qos registers need to save and restore when reset.
Change-Id: I649cf4a360842ad1abb06c35a6fd8d3868fbf706
Signed-off-by: Finley Xiao <finley.xiao@rock-chips.com>
According to the actual schematic designed by kylin board, update and
rename the regulators for rk808 node information.
Especially gpu regulator voltage, the schematic didn't have this
regulator, this regulaor should be applied by cpu regulator since the
cpu/gpu/ddr are belong to the same logic power supply.
Change-Id: I39e4cf18969391da396cc775f8660701e42977bd
Signed-off-by: Caesar Wang <wxt@rock-chips.com>
