add capabilities query interface for userspace to query
iep device feature in current soc.
Change-Id: I377e686b2ce0357aa75445e4e47e9e4883a077ae
Signed-off-by: alpha.lin <alpha.lin@rock-chips.com>
HAL_PIXEL_FORMAT_YCrCb_420_SP_10 means yuv444 10bit format, but its
name looks like yuv 420sp 10bit, that is wrong.
Change-Id: I71db8577df6e3d912427ddafe057905870622ab2
Signed-off-by: Mark Yao <mark.yao@rock-chips.com>
In above case, old code will generate a fault address for
uv address if 4k video input or output.
Change-Id: I22e9793fbaa2da250097ba69a3fd4fdf58585b78
Signed-off-by: Alpha Lin <alpha.lin@rock-chips.com>
If CONFIG_MFD_SYSCON macro define but no grf resource
define in dts will cause a error before this revision.
Change-Id: I70432530fba9c7a5d0b8f5a0c996d67237eb8198
Signed-off-by: alpha.lin <alpha.lin@rock-chips.com>
1. su & stop;
2. copy the picture bin to /data/fb0.bin;
3. echo "n xsize ysize format" > /sys/class/graphics/fb0/dsp_buf;
ps:
a. n is the number of picture
b. xsize and ysize is the picture resolution
c. format:
RGBA=1,RGBX=2,RGB=3,YUV420_SP=17
Change-Id: Id256bee73958b6ab6250a17a723b0b73e7197874
Signed-off-by: Huang Jiachai <hjc@rock-chips.com>
1. Change fiq debugger trigger mode, enter “fiq” instead of
F5 with SecureCRT
Change-Id: I3b52ad435af3211675a8416c6e016147886def8d
Signed-off-by: Huibin Hong <huibin.hong@rock-chips.com>
1.add the function of configure ddr timing such us sr_idle, pd_idle, odt
disable frequency, dll bypass frequency, odt strength, driver strength in dts.
2.make sure commit 8be554a502 ("rk3368 dts: add ddr timing node in
rk3368.dtsi" add ddr timing node in dts that user can configure ddr timing in
dts file.) was merged.
3.bl30 must update to rk3368bl30_v2.11.bin.
Change-Id: Ie8ae559c8128eb01788271a4333c465e21954ab1
Signed-off-by: Tang Yun ping <typ@rock-chips.com>
rk808 setting voltage had a overshoot question
so we set voltage must step by step.
support 12.5mv/step.
Change-Id: Idfce7b57d6717e51afaff2c170eff7bd16de23af
Signed-off-by: zhangqing <zhangqing@rock-chips.com>
Since we need overwrite this rockchip_suspend node in sub dts file,
sometimes. Add a alias for before it.
Change-Id: I6d951d1c0bfff1cde619906eb9f11256d057a9fe
Signed-off-by: Chris Zhong <zyw@rock-chips.com>
On rk3288, for gpio bank 0, the registers which configure pull-up,
iomux, and drive strength don't implement the enable bits in the upper
half of the register, unlike the other gpio configuration registers,
and so the kernel must perform a read-modify-write of the register to
update a particular gpio in that bank.
Change-Id: I4a6953839307e3a75b2ac554aac3dc865583617d
Signed-off-by: Chris Zhong <zyw@rock-chips.com>
If hdmi is inserted or removed before android is launched, screen
size is changed and uboot logo is showing on wrong screen position.
For example, screen size is 720x576 in uboot, hdmi is inserted during
kernel is booting, screen size is changed to 1920x1080, logo size
is still 720x576 and shown on left-top.
This case is occurred on box, mid has no problem. So we need to resize
uboot logo to new screen size.
Change-Id: I6247bf8e77d181687986815c960ec72d4c59a757
Signed-off-by: Zheng Yang <zhengyang@rock-chips.com>
dev_set_name()
When we use of_device_add() to create platform_device and add it to device
hierarchy, the platform_device.name and device's name will point to the same
memory.
Later we use dev_set_name() to change the device's name, it will alloc new
memory to store name and free old device's name. After it, the
platform_device.name will point to an freed memory, access platform_device.name
maybe lead to unpredictable exceptions.
So, we alloc new memory for platform_device.name in of_device_add()
Change-Id: I59bf0941ee4e094053971d41d386206e47fddcaa
Signed-off-by: Meiyou Chen <cmy@rock-chips.com>
1.Using 64bit width variable to cached the read and write data bandwidth
because it may overflow when calculating read and write data bandwidth.
2.Get ddr burst length to calculating bandwidth because lpddr2's burst
length may be bl4 or bl8.
Change-Id: I28db1793e411fc3e18edc3b6421ab3d397d92aa5
Signed-off-by: Tang Yun ping <typ@rock-chips.com>
Move rk808 regulator init parameters to the rk3xx-xx.dts
Convenient for different products setting and modify
Change-Id: I03673f4dbd478df0630e6b982e72597ade14d810
Signed-off-by: zhangqing <zhangqing@rock-chips.com>
Phy PLL may be unlock under electro-static test. The higher the
electro-static voltage, the more likely the PLL will be lost.
If PLL is unlock and irq is triggered, we will reset registers
to make it lock on correct frequency.
Change-Id: I86eaa660e837e8c2e59c8e39e3ce083bb89c1bac
Signed-off-by: Zheng Yang <zhengyang@rock-chips.com>
Rk808 will data abort if it has not sleep gpio in dts, and there is no
pmic_sleep_gpio for some board, add a validity checking before
gpio_request can fix this data abort.
Change-Id: Ic2b40f7bfb00e95d283dce72a33dd844cc2c7e27
Signed-off-by: Chris Zhong <zyw@rock-chips.com>
If the request being dequeued is already started, disable endpoint
to stop the transfer and then call dwc_otg_request_done().
Endpoint will be re-enabled on next call to dwc_otg_ep_start_transfer().
TEST=use RK3128/RK3288/RK3368 board, adb root and then adb reboot,
check if usb_req->buf is used after free.
Change-Id: I8c9304f29c578f679ad0841350920f1350bd32df
Signed-off-by: Wu Liang feng <wulf@rock-chips.com>
If uboot_vic has HDMI_UBOOT_NOT_INIT flag, it means uboot just
pass the preset vic value, registers has not been set in uboot.
If not, hdmi has been power up in uboot, should not operate phy
register again.
Change-Id: I64f48bd878ec124a94f25a752a74dc9bae502b2b
Signed-off-by: Zheng Yang <zhengyang@rock-chips.com>
