The PLL lock bits are not reliable, use per-PLL timeouts instead.
Change-Id: I2749e0d8bcfb0b60dbbcf6378b38307f77ff8d4d
Signed-off-by: Colin Cross <ccross@android.com>
Move dc init to the device init level so that all clocks are
initialized before the late init level. This depends on I2C
being initialized in the subsys init level.
Change-Id: Iafe759d943b6cc90d5c6718b69e872e14d6acd4e
Signed-off-by: Colin Cross <ccross@android.com>
Some drivers (like hdmi) need to communicate over i2c during probe.
Move the i2c bus init to the subsys init level so that i2c is ready
for the start of the device init level.
Change-Id: I81234d42aa26b657ffc619099e47df09e12083bb
Signed-off-by: Colin Cross <ccross@android.com>
Due to conflicting restrictions on the location of the framebuffer
between the bootloader and the protected aperture, the framebuffer
is likely to need to be moved during boot. This patch provides
tegra_move_framebuffer, which can handle move the framebuffer from
lowmem, highmem, or unmapped memory into unmapped memory.
Change-Id: Ic37e5e337cd3129065fe56fd7777a86d06ad69ac
This uses the patch by rmk to allow memblock_remove to be used to
remove areas of memory from the 1:1 mapping, allowing them to be
remapped later using iomap or, for Tegra, nvmap.
Also uses memblock_reserve to reserve the lp0 boot vector, so it
doesn't need to be copied later in tegra_init_suspend.
tegra_reserve should be called from the machine reserve callback
after any board-specific memory areas are reserved.
Change-Id: I26be8544a03b6da74fe66dc53a77681d431c303c
Signed-off-by: Colin Cross <ccross@android.com>
Based on patch by rmk on lkml at http://lkml.org/lkml/2010/10/11/179
Reverts changes to find_limits to fix crash when using memblock_remove
on the end of memory.
Original-author: Russell King <rmk+kernel@arm.linux.org.uk>
Signed-off-by: Colin Cross <ccross@android.com>
Change-Id: I6137a7939329381e4ed34bfcdc8b713dc50ebcc8
The framebuffer driver needs to be able to arbitrarily pin whatever
gets handed to it. Regardless of the interface used, functions need
to unpin as soon as they finish using the gart anyway.
Change-Id: Ida8aea2fb6eaca8bcbf3ae72f8dfa849dc198542
Signed-off-by: Rebecca Schultz Zavin <rebecca@android.com>
Support mono data formats such as DSP PCM Mode with 16 bit mono capture.
This patch also disables the in-driver downsampler.
Signed-off-by: Iliyan Malchev <malchev@google.com>
* 'upstream' of git://git.linux-mips.org/pub/scm/upstream-linus:
MIPS: O32 compat/N32: Fix to use compat syscall wrappers for AIO syscalls.
MAINTAINERS: Change list for ioc_serial to linux-serial.
SERIAL: ioc3_serial: Return -ENOMEM on memory allocation failure
MIPS: jz4740: Fix Kbuild Platform file.
MIPS: Repair Kbuild make clean breakage.
If the host is slow in reading data or doesn't read data at all,
blocking write calls not only blocked the program that called write()
but the entire guest itself.
To overcome this, let's not block till the host signals it has given
back the virtio ring element we passed it. Instead, send the buffer to
the host and return to userspace. This operation then becomes similar
to how non-blocking writes work, so let's use the existing code for this
path as well.
This code change also ensures blocking write calls do get blocked if
there's not enough room in the virtio ring as well as they don't return
-EAGAIN to userspace.
Signed-off-by: Amit Shah <amit.shah@redhat.com>
Acked-by: Hans de Goede <hdegoede@redhat.com>
CC: stable@kernel.org
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
remove the dependency that nvmap has on the arm_attrib_allocator
and the lowmem in PTEs change by adding a private page allocator
utility function and calling vm_map_ram unconditionally for all
sysmem handles.
also, add Kconfig variables to allow platforms to disallow the
SYSMEM heap, and to optionally restrict the SYSMEM and IOVMM
heaps to just HIGHMEM.
Change-Id: I3dab1c7323f54a8ab3994dc672b27fd79a9057d7
Signed-off-by: Gary King <gking@nvidia.com>
IOC3 is also being used on SGI MIPS systems but this particular driver is
only being used on IA64 systems so linux-mips made no sense as a list. Pat
also thinks linux-serial@vger.kernel.org is the better list.
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
When running make clean, Kbuild doesn't process the .config file, so nothing
generates a platform-y variable. We can get it to descend into the platform
directories by setting $(obj-).
The dec Platform file was unconditionally setting platform-, obliterating
its previous contents and preventing some directories from being cleaned.
This is change to an append operation '+=' to allow cavium-octeon to be
cleaned.
Signed-off-by: David Daney <ddaney@caviumnetworks.com>
Cc: Sam Ravnborg <sam@ravnborg.org>
Patchwork: https://patchwork.linux-mips.org/patch/1718/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
kvm reloads the host's fs and gs blindly, however the underlying segment
descriptors may be invalid due to the user modifying the ldt after loading
them.
Fix by using the safe accessors (loadsegment() and load_gs_index()) instead
of home grown unsafe versions.
This is CVE-2010-3698.
KVM-Stable-Tag.
Signed-off-by: Avi Kivity <avi@redhat.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
Duplicate Catalin Marinas' <catalin.marinas@arm.com> ARM change
6395/1 for VExpress to tegra
Clearing bit 22 in the PL310 Auxiliary Control register (shared
attribute override enable) has the side effect of transforming Normal
Shared Non-cacheable reads into Cacheable no-allocate reads.
Coherent DMA buffers in Linux always have a Cacheable alias via the
kernel linear mapping and the processor can speculatively load cache
lines into the PL310 controller. With bit 22 cleared, Non-cacheable
reads would unexpectedly hit such cache lines leading to buffer
corruption.
Change-Id: I37232041c035f5153a7ad73257c6333634a5f4b8
Signed-off-by: Gary King <gking@nvidia.com>
To avoid running out of DMA channels, use the shared DMA channel
for all four Tegra spi controllers.
Change-Id: Iff644253cf7fae36aa2e42321a1ded35a728da4f
Signed-off-by: Colin Cross <ccross@android.com>
rewrite interrupt handler to prevent race condition between dma operation
and serial isr.
Change-Id: I4464ba882f39ff1dc2423241f6582df687057420
Signed-off-by: Jay Cheng <jacheng@nvidia.com>
Stopping Dma after last req transfer.
add an API to return the completed transfer count of a pending, active
or finished DMA request
originally fixed by Gary King <gking@nvidia.com>
It is observed that the dma interrupt has the lower priority then
its client interupt priority. When client's isr calls dma get transfer,
the dma status has not been upated as dma isr have not been served yet.
So before reading the status, explicitly checking the interrupt status and
handling accordingly.
The another issue which is observed is that if dma has transferred the data
of amount = requested -4 and if it moves to invalid requestor before stopping
then status got reset and tarnsfered bytes becomes 0. This seems the apb dma
hw behavior. Following is the suggestion to overcome this issue:
- Disable global enable bit.
- Read status.
- Stop dma.
- Enable global status bit.
Added this workaround and it worked fine.
originally fixed by Laxman Dewangan <ldewangan@nvidia.com>
In continous mode, dma should stop after last transfer completed and
if there is no more req pending.
If there is pending req then it should check whether it has updated
in hw for next transfer or not and if it has not started then stop dma
and start new req immediatley.
originally fixed by Laxman Dewangan <ldewangan@nvidia.com>
Change-Id: I49c97c96eacdf4060de6b21cec0e71d940d33f00
There is no need to poweroff the phy and disable the clocks on shutdown.
This interferes with autopm that may try to disable the clocks after
shutdown.
Change-Id: I3aee19abe6dd11685b3be348e25fc3e195a2a416
Signed-off-by: Benoit Goby <benoit@android.com>
A repeated start should be used for all but the last msg in an xfer. The
NOSTART flag is for skipping the START frame (addr/rw)
Change-Id: If4bc88478521a8c4e1ec761bd42a84d3e398fa26
Signed-off-by: Erik Gilling <konkers@android.com>
* 'upstream' of git://git.linux-mips.org/pub/scm/upstream-linus:
MIPS: Enable ISA_DMA_API config to fix build failure
MIPS: 32-bit: Fix build failure in asm/fcntl.h
MIPS: Remove all generated vmlinuz* files on "make clean"
MIPS: do_sigaltstack() expects userland pointers
MIPS: Fix error values in case of bad_stack
MIPS: Sanitize restart logics
MIPS: secure_computing, syscall audit: syscall number should in r2, not r0.
MIPS: Don't block signals if we'd failed to setup a sigframe
This patch reverts the driver to enabling/disabling the NFC interrupt
mask rather than enabling/disabling the system interrupt. This cleans
up the driver so that it doesn't rely on interrupts being disabled
within the interrupt handler.
For i.MX21 we keep the current behaviour, that is calling
enable_irq/disable_irq_nosync to enable/disable interrupts. This patch
is based on earlier work by John Ogness.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Acked-by: John Ogness <john.ogness@linutronix.de>
Tested-by: John Ogness <john.ogness@linutronix.de>
Signed-off-by: David Woodhouse <dwmw2@infradead.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* 'for-linus/i2c/2636-rc8' of git://git.fluff.org/bjdooks/linux:
i2c-imx: do not allow interruptions when waiting for I2C to complete
i2c-davinci: Fix TX setup for more SoCs
There seems to be some interdependency between the two display controllers'
resets and HDMI. If dc0 is put into reset while HDMI is connected to dc1,
HDMI will blank.
Change-Id: I978814628609ebe3d78e7809fccef6a3d19c0f7f
Signed-off-by: Erik Gilling <konkers@android.com>
