PD#SWPL-5302
Problem:
For dongle products, it is connected to TV directly, and some
parameters are different from mbox.
Solution:
Add dongle mode for driver's usage
Verify:
U211/S905Y2
Change-Id: Ibe45b167800d3b830d78ca8e9d7b67efd64d8564
Signed-off-by: Zongdong Jiao <zongdong.jiao@amlogic.com>
0504a9a audio: add clk tuning_enable/start_enable control in dts [1/1]
32dd894 audio: add lock for resampler [1/1]
2ad1050 audio: set hdmi format-check threshold by input samplerate [2/2]
953435d audio: fix TDMOUT channel map error [1/1]
9eace31 audio: auge: add lower power mode for PDM & vad [1/1]
90b9c44 audio: auge: add loopback driver [1/1]
0d736dd audio: add 10ms sleep before pdn enable [1/1]
51d1794 audio: add 10ms delay before pdn enable [1/1]
998f60b audio: disable tl1 acodec dac dapm to depop [1/1]
7b0ef35 audio: enable hw resmaple pause thd [1/1]
fcb2613 audio: TM2 bringup: enable ADC for linein [1/1]
4f4dc5a audio: TM2: bringup AMP ti5805 on ab301 [1/1]
758b24b audio: fixed kernel panic when resample is disabled [1/1]
19e844f audio: TM2 audio basic function bringup [1/1]
27c68d0 audio: add codec trigger mute for depop [1/1]
d415bb5 audio: fixed the issue of PDM 16 channel capture. [1/1]
d6e5cf5 audio: always on DDR arb [1/1]
0663274 audio: add HW resample for HDMIRX [1/1]
22f4718 audio: add param check for resample [1/1]
audio: add HW resample for HDMIRX [1/1]
PD#SWPL-6118
Problem:
No resample will cause mismatch between
input and output if they are not at same
samplerate.
Solution:
Add resample for hdmirx case
Verify:
Local tested.
Change-Id: I298e401578bf49484d6b75fd736d2a74c38508e4
Signed-off-by: Shuai Li <shuai.li@amlogic.com>
Signed-off-by: Luan Yuan <luan.yuan@amlogic.com>
audio: always on DDR arb [1/1]
PD#TV-3452
Problem:
Toddr stuck after a long time playback.
Solution:
For debug usage.
Verify:
No need.
Change-Id: Ibf4446148f5e028040d7d6527c7695f23f964f7c
Signed-off-by: Shuai Li <shuai.li@amlogic.com>
Signed-off-by: Zhe Wang <Zhe.Wang@amlogic.com>
audio: fixed the issue of PDM 16 channel capture. [1/1]
PD#SWPL-5551
Problem:
cannot capture 8PDM + 8LOOPBACK.
Solution:
PDM cannot support 8PDM + 8LOOPBACK.
Verify:
s420/s400, verify pass
Change-Id: Iaf38bdcb218ebfc024666312162569cab93a76a9
Signed-off-by: Renjun Xu <renjun.xu@amlogic.com>
audio: add codec trigger mute for depop [1/1]
PD#SWPL-6944
Problem:
TV-3381
Speaker sometimes has clicking noise when playing DTV program.
Solution:
add codec trigger mute for depop
Verify:
Local verified.
Change-Id: Ib15a6b90bd3a6cdda2255afaf86daeab68ba07e2
Signed-off-by: Shuai Li <shuai.li@amlogic.com>
audio: TM2 audio basic function bringup [1/1]
PD#SWPL-6721
Problem:
TM2 bringup
Solution:
audio basic function bringup
Verify:
Verified on T962e2_ab311
Change-Id: Ic48ded3964ea87e40c4d683d71a50bbdc1975f91
Signed-off-by: Zhe Wang <Zhe.Wang@amlogic.com>
Signed-off-by: Luan Yuan <luan.yuan@amlogic.com>
audio: fixed kernel panic when resample is disabled [1/1]
PD#SWPL-7039
Problem:
Kernel Panic when resample A is disabled
Solution:
When resample is disabled，don't init resample
Verify:
Verified on T962e2_ab311
Change-Id: Id9552ffc6be40f133b828dbded4ad3f15d177ab0
Signed-off-by: Zhe Wang <Zhe.Wang@amlogic.com>
audio: TM2: bringup AMP ti5805 on ab301 [1/1]
PD#SWPL-7074
Problem:
speaker doesn't work
Solution:
bringup AMP ti5805 on ab301
Verify:
Verified on T962x3_ab301
Change-Id: Icb27691b4fd5a1e54070c4a6d3d3c68cdf3a60b7
Signed-off-by: Zhe Wang <Zhe.Wang@amlogic.com>
Signed-off-by: Luan Yuan <luan.yuan@amlogic.com>
audio: TM2 bringup: enable ADC for linein [1/1]
PD#SWPL-7027
Problem:
audio path AVin is on audio
Solution:
enable ADC for linein
Verify:
Verify on AB311
Change-Id: Iea1d694e0b605d62596635d85416d33f56dbbcb2
Signed-off-by: Zhe Wang <Zhe.Wang@amlogic.com>
Signed-off-by: Luan Yuan <luan.yuan@amlogic.com>
audio: enable hw resmaple pause thd [1/1]
PD#TV-4638
Problem:
Speaker output high frequency howling
after change from pattern 615 to pattern 1 on chroma22294.
The hw resampler keeps sending noise if it has no input.
Solution:
Enable the hw resample pause thd by default.
Verify:
TL1 X301.
Change-Id: Ib6f0924025e155eaa8ba0e3681b307f7ff56b449
Signed-off-by: Shuai Li <shuai.li@amlogic.com>
audio: disable tl1 acodec dac dapm to depop [1/1]
PD#TV-3933
Problem:
Tl1 acodec has pop sound when first sound appear.
Solution:
Disable the DAPM which disable/enable every time
start/stop the audio stream.
Verify:
Tl1 X301.
Change-Id: Iaaf7da125de513bd8297f6c6e41af0a42c9d25bd
Signed-off-by: Shuai Li <shuai.li@amlogic.com>
audio: add 10ms delay before pdn enable [1/1]
PD#SWPL-7680
Problem:
the pwn signal is self excitable
Solution:
1)add 10ms delay before pdn enable
2)set default clk for extern codec
Verify:
HW verify
Change-Id: I031b20851ee1eeb65215075fc8abe783ceddf42b
Signed-off-by: Zhe Wang <Zhe.Wang@amlogic.com>
audio: add 10ms sleep before pdn enable [1/1]
PD#SWPL-7680
Problem:
mdelay will pend the system
Solution:
change mdelay to usleep_range
Verify:
HW verify
Change-Id: I8452dc7b1056378dbc6b743fc43316eccbf525a5
Signed-off-by: Zhe Wang <Zhe.Wang@amlogic.com>
audio: auge: add loopback driver [1/1]
PD#SWPL-7240
Problem:
limit of current loopback
add loopback b for tl1
add tdmin_lb
Solution:
optimize loopback driver
Verify:
s400, u200, x301, ac200, ab301
Change-Id: I9dd4c7ad041231bb2c49513e354cfb4fb92131c4
Signed-off-by: Xing Wang <xing.wang@amlogic.com>
Signed-off-by: Luan Yuan <luan.yuan@amlogic.com>
audio: auge: add lower power mode for PDM & vad [1/1]
PD#SWPL-3825
Problem:
VAD & PDM works in 24m clks for lowpower mode when in deep suspend
Solution:
support VAD & PDM in 24m sysclk, 768k dclk
Verify:
x301
Change-Id: Ic363337ee9b0eba0f890ae62b9e0cb6bb54dcd6a
Signed-off-by: Xing Wang <xing.wang@amlogic.com>
Signed-off-by: Luan Yuan <luan.yuan@amlogic.com>
audio: fix TDMOUT channel map error [1/1]
PD#SWPL-6427
Problem:
ALSA tdmout buffer frequently underrun.
This will cause the tdmout channel map error.
And the other channels data go into the spk.
Solution:
1)Adjust the sequence of starting and stopping.
2)reserved frddrA for EQ/DRC module
Verify:
Test more that 1 hour and pass.
Need more stress test.
Change-Id: Ib9b6897f0b6c32652c611a8c2c367aa76b9f1e3f
Signed-off-by: Shuai Li <shuai.li@amlogic.com>
Signed-off-by: Zhe Wang <Zhe.Wang@amlogic.com>
Signed-off-by: Luan Yuan <luan.yuan@amlogic.com>
audio: set hdmi format-check threshold by input samplerate [2/2]
PD#SWPL-6340
Problem:
ddp audio input from hdmiin is not smooth
Solution:
set hdmiin format-check threshold by input sr
Verify:
Verified by x301.
Change-Id: Idb8ffa616c3880b1c34d61ca4e8c2917343a9ffc
Signed-off-by: Zhe Wang <Zhe.Wang@amlogic.com>
audio: add lock for resampler [1/1]
PD#SWPL-8134
Problem:
kernel NULL pointer for aml_resample_enable
Solution:
add lock for resampler
Verify:
Need stress test for x301
Change-Id: I1bbf5d7aeab681399c93f0cba9cc59195d3be0d6
Signed-off-by: Shuai Li <shuai.li@amlogic.com>
audio: add clk tuning_enable/start_enable control in dts [1/1]
PD#SWPL-8306
Problem:
speaker without audio on S400. sideeffect of SWPL-7680
Solution:
add control interface in dts to enable clk tuning
and start clk before codec init
Verify:
verify on S400
Change-Id: Ic9f4e7b13b7d4ced18852346cdc7cf5f48e510dc
Signed-off-by: Zhe Wang <Zhe.Wang@amlogic.com>
Signed-off-by: Luan Yuan <luan.yuan@amlogic.com>
audio: add param check for resample [1/1]
PD#SWPL-7798
Problem:
Crashed when audio resample setting params
are invalid.
Solution:
Add check method if the params is invalid.
Verify:
Tl1.
Change-Id: I1e0396be8d401c0a49ff0de9fd7f160f0c8133ca
Signed-off-by: Shuai Li <shuai.li@amlogic.com>
Signed-off-by: Luan Yuan <luan.yuan@amlogic.com>
PD#SWPL-5427
Problem:
lack vad function for sm1
Solution:
add vad function for sm1
Verify:
ac200
Change-Id: Ib4118b16405102a72f98ff65396e6f9d98f97bca
Signed-off-by: Xing Wang <xing.wang@amlogic.com>
PD#TV-470
Problem:
t950 ddr bandwidth usage is error
Solution:
t950/805x ddr is 16bit, correct the param to get right usage
Verify:
t950
Change-Id: Ice876f82e5c33e778b3ac9f593e0c163d57d7f3f
Signed-off-by: wenbiao zhang <wenbiao.zhang@amlogic.com>
PD#SWPL-8315
Problem:
flanklin dvb dts used 3.14 mode
Solution:
flanklin update dvb dts to adapte attach mode
Verify:
verify it on franklin.
Change-Id: I53a9ed2c6f28e75cbb327c2d1c122622b2e4b23e
Signed-off-by: Cheng Tong <cheng.tong@amlogic.com>
dts: flanklin bring up based on google-ref! [1/2]
PD#SWPL-7184
Problem:
flanklin bring up based on google-ref.
Solution:
Modify copy file for franklin.
Verify:
verify it on franklin.
Change-Id: Ibaba2dcb7a3e8715243f5a93d69a1bf96e8c49a7
Signed-off-by: qiyao.zhou <qiyao.zhou@amlogic.com>
dts: flanklin bring up based on google-ref! [1/1]
PD#SWPL-7184
Problem:
flanklin bring up based on google-ref.
Solution:
Modify copy file for franklin.
Verify:
verify it on franklin.
Change-Id: If55159835daf0a87439647586526f836a226504c
Signed-off-by: qiyao.zhou <qiyao.zhou@amlogic.com>
PD#SWPL-5404
Problem:
run hs400 200M on sm1
Solution:
config sm1 and modify dts
Verify:
passed on ac200
Change-Id: I34e54f88db79ce42f9effbf8d673ade613de328f
Signed-off-by: Ruixuan Li <ruixuan.li@amlogic.com>
PD#SWPL-5040
Problem:
not support HS400 busmode
Solution:
add HS400 busmode support for G12B-RevB
Verify:
T962X-R311,TL1-T962X2_X301,G12B-W400
Change-Id: I11a1f47b9473fa341c7d754a51d6e270551758a7
Signed-off-by: long yu <long.yu@amlogic.com>
PD#SWPL-2311
Problem:
not support HS400 busmode
Solution:
add HS400 busmode support for TL1
Verify:
TL1-T962X2_X301
Change-Id: I95ac19e9c0c5b84c9225602cda6964aaaee4151e
Signed-off-by: Long Yu <long.yu@amlogic.com>
Signed-off-by: Luan Yuan <luan.yuan@amlogic.com>
PD#SWPL-8219
Problem:
not support lcd panel in ac202
Solution:
support lcd panel.
Verify:
verify by ac202.
Change-Id: Ib462a3536c21f0a55c0e0ff947f01c8f52ef3f13
Signed-off-by: Luan Yuan <luan.yuan@amlogic.com>
PD#SWPL-7973
Problem:
s905d2 panel need new projects config.
Solution:
copy dts config from u200
Verify:
no need verify
Change-Id: I37a884ae951b8c6ede7adb065239ce59dca25c3a
Signed-off-by: Luan Yuan <luan.yuan@amlogic.com>
u202: add dts-id for multi-dts in 32bit. [1/1]
PD#SWPL-7973
Problem:
upgrade failed, because can not found dts.
Solution:
change dts-id
Verify:
verify by u202
Change-Id: I9cfd85ebfda1bff60abc78bd09355f977f25f4bf
Signed-off-by: Luan Yuan <luan.yuan@amlogic.com>
PD#SWPL-6423
Problem:
deghost refresh according to motion
Solution:
disable deghost refresh according to motion
Verify:
verify on TL1
Change-Id: Ic3647462e5f5686f6cc182c30797752ea72c013c
Signed-off-by: MingLiang Dong <mingliang.dong@amlogic.com>
PD#SWPL-5046
Problem:
PD22 para is incorrect
Solution:
correct the parameters
Verify:
verified by t962x2_x301
Change-Id: I0b26914694dd19f9b06cb37c50f7589a200ea0b1
Signed-off-by: zhiwei.yuan <zhiwei.yuan@amlogic.com>
PD#SWPL-5837
Problem:
dtv is out of avsync when dolby ms12 certificate
Solution:
when the audio is played, recalculate the apts to sync
pcrsrc when pcrmaster.
Verify:
X301
Change-Id: I199383aa1c0de1b4f0ec646d9d066910b3bb2b42
Signed-off-by: Xiaoming Sui <xiaoming.sui@amlogic.com>
avsync: tsync: fix the avsync for ms12 [3/4]
PD#SWPL-5837
Problem:
dtv is out of avsync when dolby ms12 certificate
Solution:
when the audio is played, recalculate the apts to sync
pcrsrc when pcrmaster.
Verify:
X301
Change-Id: Ia121e57ad69c5b0d211e14bf3a61f165457e54c7
Signed-off-by: Xiaoming Sui <xiaoming.sui@amlogic.com>
PD#SWPL-6094
Problem:
some mvc stream is not smooth.
Solution:
optimize the condition for pts loockup fail code.
Verify:
x301
Change-Id: I50bb3f317e1245735f9ce0ffcc44376c91e871ed
Signed-off-by: shihong.zheng <shihong.zheng@amlogic.com>
PD#SWPL-6152
Problem:
in some special cases, there are many sync
log information from serial port.
Solution:
remove this log and add pts realign.
Verify:
X301
Change-Id: I81d1753ef6d4e6c1e39d6c7f38eb3836e07be05d
Signed-off-by: Xiaoming Sui <xiaoming.sui@amlogic.com>
PD#TV-5140
Problem:
when play some ts stream , the video will hold all the time
Solution:
when the pcr is invalid ,use apts or vpts as system
time and enable the system time up funciton
Verify:
x301
Change-Id: Iec01434ab305be1ea32e03549edd8521a8c4620d
Signed-off-by: live.li <live.li@amlogic.com>
PD#SWPL-6586
Problem:
Android P trunk can not compile 64bit kernel
Android P vendor size is not enough,
64bit kernel and isp so etc ,
the size exceeds 256M
Solution:
change vendor size from 256M into 320M
Verify:
galilei
Change-Id: Icc7b3d7c8d56f5c361acf9722bba6422b8dc3af2
Signed-off-by: Liang Ji <liang.ji@amlogic.com>
Signed-off-by: Luan Yuan <luan.yuan@amlogic.com>
PD#SWPL-6607
Problem:
Not support QOS information for mh264.h265,avs2
Solution:
Support QOS information picking for mh264,h265,avs2
Support QOS information access interface by ioctl
Verify:
Verified franklin
Change-Id: I4e6f85392007bc78a274726aba510c39088018e3
Signed-off-by: Rong Zhang <rong.zhang@amlogic.com>
PD#SWPL-5038
Problem:
image will block when pts discontinue
Solution:
do not show the frame when pts greater than pcr
Verify:
tested on Marconi
Change-Id: I57ea973b7fdcdc7cded2c5c9b681be29f0a31a4b
Signed-off-by: peter wang <peter.wang@amlogic.com>
PD#SWPL-7166
Problem:
suspend resume test failed
Solution:
cancel work queue first
Verify:
verify on u200 board
Change-Id: Ibd1a9587a32edf5583db564d2efe0ff0279d4d10
Signed-off-by: Zhuo Wang <zhuo.wang@amlogic.com>
PD#SWPL-6608
Problem:
system will report tx error somethime after resume
Solution:
reset ethernet when resume
Verify:
verify on u200 board
Change-Id: I9863a8a50c08addd4e2d8c024f46a2e7568c28b4
Signed-off-by: Zhuo Wang <zhuo.wang@amlogic.com>
PD#SWPL-5295
Problem:
add RX delay for 8211f and add led setup interface
Solution:
tuning delay and leds
Verify:
verify on u200 board
Change-Id: I45e855894d570fdd976f90fd8f03151ad52a3683
Signed-off-by: Zhuo Wang <zhuo.wang@amlogic.com>
PD#SWPL-6394
Problem:
free clk if failed to set 1G for fixpll.
Solution:
free clk if failed to set 1G for fixpll..
Verify:
test pass on A311D-W400
Change-Id: I1a7af6fe459c067e34ff8752453a1a04985edb88
Signed-off-by: Hong Guo <hong.guo@amlogic.com>
a9eb626 dtv_demod: Prevent NULL pointer crash caused by tuner attach failure [1/1]
d27b145 dtv_demod: TL1 dtmb suspend hangup issue [1/1]
27c05dd dtv_demod: tl1,dvbc, new method for fast channel searching [1/1]
fa80091 dtv_demod: txlx atsc-t loses lock when play video for a long time [1/1]
43db0c5 build: fix build err [1/1]
d4abd67 dtv_demod: TXLX ISDB-T can't search channel [1/1]
70f2c39 dtv_demod: TL1 dvbc search time more than 3 min [1/1]
16d4727 dtv_demod: TL1 dtmb cma allocate fail after dtmb->dvbc->dtmb by cmd [1/1]
b5aa9de media_module: h264/mpeg2/h265 [2/2]
3d6a5ed ppmgr: use light reg for video decoder local reset [1/1]
ppmgr: use light reg for video decoder local reset [1/1]
PD#SWPL-5014
Problem:
ppmgr provider error sometimes in long time run under poor signal
Solution:
use light reg for video decoder local reset
Verify:
X301
Change-Id: I1500c9ddfdce76b3e9cb2b24a35cdee765f82d5f
Signed-off-by: Hui Zhang <hui.zhang@amlogic.com>
media_module: h264/mpeg2/h265 [2/2]
PD#SWPL-3654
Problem:
provide aspect_ratio information by AMSTREAM_IOC_VDECSTAT
Solution:
add ration_control information in vdec_status function for
h264/mh264/vh265/mpeg12/mmpeg12, and normalized it for
aspect_ratio in AMSTREAM_IOC_VDECSTAT message.
Verify:
Verified U212
Change-Id: Icd9270eb8f2ce2f6f7455ec28780d26ac6c56348
Signed-off-by: Rong Zhang <rong.zhang@amlogic.com>
dtv_demod: TL1 dtmb cma allocate fail after dtmb->dvbc->dtmb by cmd [1/1]
PD#TV-1748
Problem:
[Hisense-T962X2-P-customer-DTV]:Failed to lock frequency in dtmb system
Solution:
leave the last mode before enter current mode to release the resources
Verify:
verified by t962x2_x301
Change-Id: Ibd7e1d4c67f5a5ad2191e0031fdd0b81812c8606
Signed-off-by: Zhiwei Yuan <zhiwei.yuan@amlogic.com>
dtv_demod: TL1 dvbc search time more than 3 min [1/1]
PD#SWPL-3555
Problem:
{DVB-C}Hisense needs less than 3 minutes for dvb-c search.(5/5，None)
Solution:
1.use demod internal state machine to optimize time
2.remove j.83b filter setting in dvbc mode for tl1 & txlx
Verify:
verified by t962x2_x301&t962x_r311
Change-Id: Ic922e3da727179e2e35a0fc80e52ac7242c54129
Signed-off-by: Zhiwei Yuan <zhiwei.yuan@amlogic.com>
dtv_demod: TXLX ISDB-T can't search channel [1/1]
PD#SWPL-3987
Problem:
[Einstein]use ISDB-T cannot search any channel
Solution:
release cma memory at leave_mode for ISDB-t&DVB-T
Verify:
verified by t962x_r311
Change-Id: I9b79687a4d5270932ab30afaa3e7d2817e900149
Signed-off-by: Zhiwei Yuan <zhiwei.yuan@amlogic.com>
build: fix build err [1/1]
PD#SWPL-4150
Problem:
When switch to the toolchain shipped with android P, multipile
"-Werror=maybe-uninitialized" error occurs, and the code fail
to be compiled
Solution:
Initialize variables if necessary
Verify:
Locally on Ampere
Change-Id: I280de648914565656831e211539bf41a7dee2b4a
Signed-off-by: Jiamin Ma <jiamin.ma@amlogic.com>
dtv_demod: txlx atsc-t loses lock when play video for a long time [1/1]
PD#SWPL-3418
Problem:
[Einstein]when AC off/on,enter live TV ,
TV display blank screen and no signal about 5S
Solution:
use post-eq to track(0x912=0x50)
Verify:
verified by t962x_r311
Change-Id: I924c55a8f1c92328e4371cb730e1b03bd720457f
Signed-off-by: Zhiwei Yuan <zhiwei.yuan@amlogic.com>
dtv_demod: tl1,dvbc, new method for fast channel searching [1/1]
PD#TV-2154
Problem:
[Hisense-T962X2-P-customer-DTV]:DVBC QAM is set to auto to search channels
Solution:
add new searching method
note:
use "demod_dvbc_speedup_en" to mark the new method
it's disabled as default, can be enabled if needed
we can make it always enabled after all testing are passed
enable: echo fast_search on > /sys/kernel/debug/demod/dvbc_channel_fast
Verify:
verified by t962x2_x301
Change-Id: Icaaab9f27eb058a062d7048c6ca9fa2e3bff008e
Signed-off-by: Zhiwei Yuan <zhiwei.yuan@amlogic.com>
dtv_demod: TL1 dtmb suspend hangup issue [1/1]
PD#SWPL-5202
Problem:
cma memory is not released when suspend
Solution:
provide suspend interface to release cma memory
Verify:
verified by t962x2_x301
Change-Id: I1d808a8a6119a2f385961c4c5bded5ab71c9c9d1
Signed-off-by: zhiwei.yuan <zhiwei.yuan@amlogic.com>
dtv_demod: Prevent NULL pointer crash caused by tuner attach failure [1/1]
PD#TV-1539
Problem:
Prevent NULL pointer crash caused by tuner attach failure.
Solution:
Prevent NULL pointer crash caused by tuner attach failure.
Verify:
verified by x301
Change-Id: I57cf32947775626467eb952dd2298ae9ec84601d
Signed-off-by: nengwen.chen <nengwen.chen@amlogic.com>
dtv_demod: add AGC control for board t309 [1/1]
PD#SWPL-5175
Problem:
r842 agc control need be controlled by demod
Solution:
add agc control function
Verify:
verified by t962x2_x301 t962x2_t309
Change-Id: If712e22276b97c457e2e2ed1c79bdf3673813dff
Signed-off-by: zhiwei.yuan <zhiwei.yuan@amlogic.com>
PD#TV-4365
Problem:
USB keyboard not recognized after reboot repeatedly.
Solution:
Reset the reset_FS_LS_Clock_Divider bit of the usb phy.
Verify:
tl1
Change-Id: I0f4bf35be04d3aff1094bf55641348ccaca072e4
Signed-off-by: he.he <he.he@amlogic.com>
PD#SWPL-5664
Problem:
for netflix 23.97fps non-tunnle playback 3:2 patten broken so many times
Solution:
reuse initial phase that Tim use in amazon
Verify:
verify by u212
Change-Id: I5d988e1c3a3dbf1bb728f55a921e8b8fb6990985
Signed-off-by: shuanglong.wang <shuanglong.wang@amlogic.com>
PD#SWPL-5664
Problem:
pcr not paused when netflix video non-tunnel mode pause
Solution:
do not compensation when diff between omxpts and pcr too large
Because when paused, continous compensation will lead diff
beween omxpts and pcr will alway inside pcr adjust threshold,
and pcr not set again, then pcr will increase
Verify:
verify by nts
Change-Id: Ib2acea35758d161d1e9db53dd6ff369ba7973351
Signed-off-by: shuanglong.wang <shuanglong.wang@amlogic.com>
PD#SWPL-5664
Problem:
pcr is probably adjust when test AL1 eyepatch test case
Solution:
the time is not accurate when check pcr and omx_pts differ, because
omx_pts is used the value that be set, but pcr is current. Here add
compensation for omx_pts
Verify:
verify by nts
Change-Id: I3e0f6f006fd79cf7cac4148fd18da72111a333c7
Signed-off-by: shuanglong.wang <shuanglong.wang@amlogic.com>
PD#SWPL-7656
Problem:
crash when there is cpu boot fail in hmp
Solution:
fix crash when there is cpu boot fail in hmp
Verify:
W400
Change-Id: I0153975593adb0bfcbc3c3bd6543f0fb2e6bf2e0
Signed-off-by: Jianxin Pan <jianxin.pan@amlogic.com>
PD#SWPL-7181
Problem:
switch to high-speed from hs200 failed for resume process.
Solution:
set tx_delay as 0 for legacy mode.
clear cfg_cmd_setup
Verify:
verify by TL1
Change-Id: I5dbb1bbc391da864464bf137837a2b0f54ccda42
Signed-off-by: Long Yu <long.yu@amlogic.com>
Signed-off-by: Luan Yuan <luan.yuan@amlogic.com>
PD#SWPL-7960
Problem:
There is no min ddr bandwidth data
Solution:
Add this value in sysfs
Verify:
p212
Change-Id: I9d90476d30c0ca7789046d8d205f0802de2b4acf
Signed-off-by: Tao Zeng <tao.zeng@amlogic.com>
PD#SWPL-7798
Problem:
Crashed when audio resample setting params
are invalid.
Solution:
Add check method if the params is invalid.
Verify:
Tl1.
Change-Id: I1e0396be8d401c0a49ff0de9fd7f160f0c8133ca
Signed-off-by: Shuai Li <shuai.li@amlogic.com>
PD#SWPL-6865
Problem:
ddr bandwidth measure is not supported on sm1
Solution:
1. Add port description and support for it
2. Record max/average bandwidth support;
3. Support up to 60 continue bandwidth sample
4. Fix bit mismatch of dmc monitor for sm1/tl1.
Verify:
sm1
Change-Id: I0b42db8214099b9cd6d1c3f00174dc65eebfc030
Signed-off-by: Tao Zeng <tao.zeng@amlogic.com>
Signed-off-by: Luan Yuan <luan.yuan@amlogic.com>
PD#SWPL-7765
Problem:
g12b revb efuse not correct
Solution:
set tx_amp with chipid to work around
Verify:
verify on g12b skt board
Change-Id: Id1babce231d866293e4de52685834834a4b65227
Signed-off-by: Zhuo Wang <zhuo.wang@amlogic.com>
