PD#174867
Problem:
vrtc time update for stick mem.
Solution:
vrtc time update for stick mem.
Verify:
g12a txl.
Change-Id: I65074422569370b253882a4e66fb771da10ccdbf
Signed-off-by: Hong Guo <hong.guo@amlogic.com>
PD#SWPL-1978
Problem:
bring up board r314.
Solution:
increase board dts file
feature:
The Dts file with Einstein is identical except for the memory difference
R314 1.5G, Einstein 1G.
Verify:
Verified on txlx_t962x_r314 board.
Change-Id: I271cb92a9cbcab174fb0bb76cfbc8beff9c730d3
Signed-off-by: guotai.shen <guotai.shen@amlogic.com>
PD#SWPL-2250
Problem:
h265 & vp9 4K playback abnormal because HEVC FRONT &
VPU READ2 pollute the phy address of near 0x0.
Solution:
it's only a temporary modification, the real reason
needs to take more time fixed.
Verify:
U212
Change-Id: I3dcc47f8979960e95c89cf53fe10eadc1a7ae5ad
Signed-off-by: Nanxin Qin <nanxin.qin@amlogic.com>
PD#SWPL-1689
Problem:
The thread still exists when the process exits
Solution:
Check if the thread exits when the process exits
Verify:
local
Change-Id: I6d805da6bfa0df85b6d39d065c95eed49b3cb7da
Signed-off-by: Renjiang Han <renjiang.han@amlogic.com>
PD#SWPL-1937
Problem:
secure discard and trim may cost 5mins on toshiba
"004GA0" emmc.
Solution:
using normal discard operation instead.
Verify:
W400
Change-Id: I7fd23867f8ae0af9192377de8f8c15609ef809ed
Signed-off-by: Yonghui Yu <yonghui.yu@amlogic.com>
PD#173820
Problem:
kasan bug in di_task_handle
Solution:
delete cma_mutex because it has no effect
Verify:
P321
Change-Id: Ie6ca7973576e7350870c5466b54b38b490dff65e
Signed-off-by: Jihong Sui <jihong.sui@amlogic.com>
PD#172256
Problem:
On G12A/G12B, bit for ddr0 protection 0 vilation is not same
Solution:
Fix bit missmatch problem
Verify:
U212
Change-Id: I5dca14c8bc96bdcb85dbe8bbd5a9a18157834bcf
Signed-off-by: tao zeng <tao.zeng@amlogic.com>
PD#SWPL-1603
Problem:
don't support old spi driver now
Solution:
update new spi driver api for ldim driver
Verify:
txlx r311
Change-Id: I4dff13e4cab5666a30488730e27c6275b933a922
Signed-off-by: Evoke Zhang <evoke.zhang@amlogic.com>
PD#SWPL-1513
Problem:
ab update can not work on P
Solution:
add dtsi for ab update for P
Verify:
test pass in ampere
Change-Id: I6ff219170a16c0081fba7297110e8dfaadcff401
Signed-off-by: Xindong Xu <xindong.xu@amlogic.com>
PD#SWPL-2286
Problem:
emmc response crc error in emmc init.
Solution:
clean emmc reg val from uboot to kernel.
Verify:
w400
Change-Id: I6a4763187f18e9e284c887c5c788f3a88c8548ff
Signed-off-by: Nan Li <nan.li@amlogic.com>
PD#172865
Problem:
Customer requests a new release for linux dvb
Need enable dvb for QA testing
Solution:
Need enable dvb for QA testing
Verify:
Change-Id: Ib082c457d6f43ef4d6a5d16059a7e8ce068a332e
Signed-off-by: yeping.miao <yeping.miao@amlogic.com>
PD#TV-288
Problem:
There is flicker and jitter in HDMI
Solution:
enable vdin0 urgent for T950 default
Verify:
p321-T950
Change-Id: I17e472d7a47411093e9ade70a342807bed060a3a
Signed-off-by: Dezhi Kong <dezhi.kong@amlogic.com>
PD#SWPL-318
Problem:
Output big "PO" sound when change source from ATV to others,
or switch between small window and full screen in ATV source.
Solution:
disable atv status early when exit ATV source.
Verify:
verified by p321
Change-Id: I82af7f8eaef181f1f72ef1f9d194e33c1efdcdb5
Signed-off-by: nengwen.chen <nengwen.chen@amlogic.com>
PD#SWPL-1127
Problem:
when dv output hdr mode, the quantization range is default value
instead of limited range
Solution:
set quantization range to limited range in avi info
Verify:
t962e (txlx)
Change-Id: Ib4fbeb1c7efcedd7194143772ee5c663284a1c77
Signed-off-by: Yi Zhou <yi.zhou@amlogic.com>
PD#SWPL-2046
Problem:
some of the remaining 64bit boards do not support 32bit.
Solution:
modify the dts to support 32bit.
Verify:
axg, g12a, g12b, gxl, gxm, txl, txlx.
Change-Id: I951f8d32b18243a64e2abc5008bbb015c2e21e7a
Signed-off-by: Jianxiong Pan <jianxiong.pan@amlogic.com>
PD#SWPL-1909
Problem:
mem rw exception caused crashed.
Solution:
1. add mapping the highmem address by the func vmap().
2. remove the flag CODEC_MM_FLAGS_CPU if not necessary.
Verify:
p212, w400
Change-Id: I982c775d7c009335cae5802f0eb6287d22037db6
Signed-off-by: Nanxin Qin <nanxin.qin@amlogic.com>
PD#SWPL-1909
Problem:
On 32bit kernel, codec cma is located in normal zone by
"alloc-ranges" parameter with large size. This takse up
memory space for kernel and drivers. Sometimes we can see
memory allocation fail log but there are still enought
free pages. But most of these pages are CMA pages.
Solution:
Move codec cma location to high memzone. On 32bit, low
768MB memory is normal zone.
This change also correct first 1MB memory lost problem
for chips later than TXLX
Verify:
P212
Change-Id: I4592d34d08ee4dbb6700bbbfc4e0fadaceab0310
Signed-off-by: tao zeng <tao.zeng@amlogic.com>
PD#SWPL-1618
Problem:
Add afbc support on g12a and txlx
Solution:
add afbc support on g12a and txlx
Verify:
T962X-R311, U200(G12A)
Change-Id: Ia0cce8516a98653b01c3bc628e812c3a81b1df59
Signed-off-by: huaihao.guo <huaihao.guo@amlogic.com>
PD#SWPL-206
Problem:
overscan set error when local play
Solution:
overscan don't set at vpp
Verify:
verify on txlx
Change-Id: Ifd4ad4f5fcdb9fbc7ad05a540d0ed11b24d4ca66
Signed-off-by: MingLiang Dong <mingliang.dong@amlogic.com>
PD#SWPL-1774
Problem:
DD program has avysnc problem over one night play
Solution:
fix the apts set bug
Verify:
p321
Change-Id: I0f6a5b47d3e3171a3dd8fa9a0b721cd11ec20b9e
Signed-off-by: live.li <live.li@amlogic.com>
PD#IPTV-55
Problem:
When connect to a Samsung TV(support 4k60 422 12bit), get a wrong
0 of 'echo 2160p60hz422,12bit > valid_mode'
Solution:
Remove a wrong Y422 format judgement
Verify:
P212
Change-Id: Ic0f2cefc1e0893390ac38298b55272877d81e04b
Signed-off-by: Zongdong Jiao <zongdong.jiao@amlogic.com>
PD#SWPL-1303
Problem:
For TXLX/T962E/R321 cases, there are both HDMI TX and RX.
Should consider it as repeater.
Solution:
Enable repeater_tx in r321/atom dts
Also, add a missing ksv_lists[] clear.
Verify:
r321/atom
Change-Id: I7b512c34123481380220f9262466fde56b0ae6e3
Signed-off-by: Zongdong Jiao <zongdong.jiao@amlogic.com>
PD#SWPL-972
Problem:
audio crash when ATV switch channel long time burning test
Solution:
there is a risk to fetch the timer lock. when input stop, stop_timer
will call del_timer, at the same time the function
"aml_i2s_hrtimer_callback" is waiting for the timer lock,after
stop_timer release the lock,"aml_i2s_hrtimer_callback" get the
lock and call mod_timer again, which will set the timer to pending
status. It will cause the next "start input" stage,add_timer will
trigger BUG_ON.Now we put the lock before the active status
checking then we will not touch the timer.
Verify:
Need burning test
Change-Id: I1fb66903a4d31e9491ac0533e477e1597575d4cf
Signed-off-by: Jian Xu <jian.xu@amlogic.com>
PD#165143
Proble：
fine-tune voltage OPP
Solution:
fine-tune voltage OPP
Verify:
G12A/G12B,PASS
Change-Id: I0b3fb0e4624e2ddfa635c8225a740ed7a8ff3e51
Signed-off-by: Hong Guo <hong.guo@amlogic.com>
PD#SWPL-1600
Problem:
The current watchdog is not the upstream standard driver.
Solution:
Replace watchdog device tree to use the standard watchdog driver.
Verify:
S905X P215/P212 Android-32bit Kernel-32bit.
Change-Id: I972c8ebb0158caa2df393d9a2d687d9298181102
Signed-off-by: Bo Yang <bo.yang@amlogic.com>
PD#SWPL-122
Problem:
ddr bandwidth is tightly in many cases, such as HDR/4K video playing,
and then refresh osd at the same time
Solution:
in most cases the problem is refreshing osd when bandwidth tightly,
so detect ddr bandwidth usage except mali and reduce it when it is tightly
Verify:
verify by p321/r311
Change-Id: Ia594f08dbe9a8a7a8d78b5104c93bddaa8229c0b
Signed-off-by: wenbiao zhang <wenbiao.zhang@amlogic.com>
PD#SWPL-1010
Problem:
some errors of reg address.
Solution:
modify to support 32bit.
Verify:
w400.
Change-Id: Ia35e95ac59084a9c57a9a4ab32fecb64f78c772e
Signed-off-by: Jianxiong Pan <jianxiong.pan@amlogic.com>
PD#163001
Problem:
hdr mode set not supported
Solution:
add hdr mode set via meson-hwc support
Verify:
verified in u200 board
Change-Id: Iaad75982003870f9469e4155aedb9c13349b60b9
Signed-off-by: pengcheng chen <pengcheng.chen@amlogic.com>
PD#163001
Problem:
uboot logo scaler down in 4k
Solution:
uboot logo size adjust when vout changed before
first page flip command
Verify:
verified in u200 board
Change-Id: Ic23e695fe716811eaf3faa62069c808a03c26f9d
Signed-off-by: pengcheng chen <pengcheng.chen@amlogic.com>
PD#166793
Problem:
conditional statement not is valid.
Solution:
change type u32 to type int.
Verify:
module owner confirmed.
Change-Id: I9fdfa444b29104c7afc9b7a380748ebe82ed390b
Signed-off-by: Jianxiong Pan <jianxiong.pan@amlogic.com>
PD#163001
Problem:
current osd code have one line missing issue in meson-hwc
Solution:
osd blend used +1 line to fix shift issue,
and used freescale to cut it.
Verify:
verified in u200 board
Change-Id: I2354742d456327d9f1aa5713ee782648895034db
Signed-off-by: pengcheng chen <pengcheng.chen@amlogic.com>
PD#SWPL-1630
Problem:
add cvbs/hdmi/lcd bist test on vout
Solution:
add cvbs bist test on vout
Verify:
test pass on u200/p212
Change-Id: Ie61d9b0d63649ec3022fd720068b689f4d721e3b
Signed-off-by: Nian Jing <nian.jing@amlogic.com>
PD#SWPL-1636
Problem:
1.pc bad value in kernel panic after change source.
2.System crash down when change source.
Solution:
optimize atv demod code.
Verify:
verified by p321
Change-Id: I655d1253950475dfb49ae1b174597797000adb73
Signed-off-by: nengwen.chen <nengwen.chen@amlogic.com>
PD#SWPL-743
Problem:
The picthre is shaking when press DVD remote
control in AV source
Solution:
add delay work for vlock process interlace input
Verify:
T962X-R311
Change-Id: Ic2ed077e0684ecc6b0990336e7a4ab7022931886
Signed-off-by: Dezhi Kong <dezhi.kong@amlogic.com>
PD#174488
Problem:
segmentation in descriptive information is reasonable and
should be allowed.
Solution:
modify the check codes.
Verify:
test locally.
Change-Id: I5e34ef2dd26077bb54adee7597a1aa3c789566c9
Signed-off-by: Jianxiong Pan <jianxiong.pan@amlogic.com>
PD#SWPL-1942
Problem:
add atom.dts support 32bit.
Solution:
modified length of reg, mem etc.
Verify:
r321
Change-Id: I2a518af2a76b8cb17ded68e994c3065072b92b9c
Signed-off-by: Jianxiong Pan <jianxiong.pan@amlogic.com>
PD#SWPL-1819
Problem:
lack of isp and galcore support in buildroot dts
Solution:
merge configurations from skt board
Verify:
local
Change-Id: I5936341fc24719f345c7707e16e692ae292ca6fe
Signed-off-by: Jun Zhang <jun.zhang@amlogic.com>
PD#169128:
[Problem]
When quick switch video between 2 vsync isr, the AFBC may read wrong
data, and green screen or distortion image occurs.
[Solution]
1. Add delay when get video layer state, to make sure afbc is stopped
2. Remove ambiguous log print
[Platform]
Blanche
BranchTo: NONE
[Test]
Change-Id: I94ccf25373f29ce188829ab1b7db6f9df1fb49ad
Signed-off-by: Zhi Zhou <zhi.zhou@amlogic.com>
