PD#OTT-1025
Problem:
not support gen clock
Solution:
add gen clock
Verify:
test passed on g12a u200
Change-Id: I5199289d3cd1483fffbbd41f8d104369214ba302
Signed-off-by: Jian Hu <jian.hu@amlogic.com>
PD#OTT-1025
Problem:
don't support gen_clk_ee and gen_clk_ao pin groups
Solution:
add gen_clk_ee/ao pin groups according to the corepinmux document
Verify:
test pass on U200
Change-Id: Ia3e61079def285c482d8dc4957b5f9e7db35847d
Signed-off-by: Xingyu Chen <xingyu.chen@amlogic.com>
PD#SWPL-1219
Problem:
On arm64, thread stack is 16KB for each task. If running task number
is large, this type of memory may over 40MB. It's a large amount on
small memory platform. But most case thread only use less 4KB stack.
It's waste of memory and we need optimize it.
Solution:
1. Pre-allocate a vmalloc address space for task stack;
2. Only map 1st page for stack and handle page fault in EL1
when stack growth triggered exception;
3. handle stack switch for exception.
Verify:
p212
Change-Id: I47f511ccfa2868d982bc10a820ed6435b6d52ba9
Signed-off-by: tao zeng <tao.zeng@amlogic.com>
PD#OTT-776
Problem:
dv core 2 get the error hsize and vsize from OSD module
Solution:
when opening 3 osd paths. we get the accurate the parameters again
Verify:
g12b s922
Change-Id: Ib6af084910c8cf1896060295c7cea75971cd86b6
Signed-off-by: Yi Zhou <yi.zhou@amlogic.com>
PD#SWPL-1076
Problem:
Kplayer 4KDemo.mp4, show green screen.
Solution:
add DI_IF1_GEN_REG set when no mirror
Verify:
p212
Change-Id: I2cfb27068393832fb47498ebdb9b93349f1fe635
Signed-off-by: Jihong Sui <jihong.sui@amlogic.com>
PD#SWPL-2551
Problem:
range of mouse is wrong under 4K mode
Solution:
new cursor coordinate paras without using scale
add osd_cursor_hw_no_scale() to deal with it.
Verify:
verified on P212
Change-Id: I1748df569b96522eb58dc00af862983bca17815a
Signed-off-by: Jian Cao <jian.cao@amlogic.com>
PD#SWPL-2295
Problem:
1.modify atv demod code for coverity.
2.add ntsc-m ring filter for t962x2.
3.merge code optimization from android l.
4.add tuner compatible info in dts for tuner debug.
Solution:
1.modify atv demod code for coverity.
2.add ntsc-m ring filter for t962x2.
3.merge code optimization from android l.
4.add tuner compatible info in dts for tuner debug.
Verify:
verified by einstein
Change-Id: I9696aa628315ee11f0c9dd279c7cc03797f04331
Signed-off-by: nengwen.chen <nengwen.chen@amlogic.com>
PD#SWPL-2512
Problem:
isp reserved mem too large
Solution:
reduce isp mem to 256M
Verify:
g12b-buildroot
Change-Id: I8e18f7618a069b43fa288221bca1943d5c3ebcc2
Signed-off-by: Jiacheng Mei <jiacheng.mei@amlogic.com>
PD#SWPL-2787
Problem:
Bringup tl1 t309.
Solution:
Add device tree for t309 boards base on x301.
Verify:
test pass on x301 board
Change-Id: I98e806b63a27a5e5f2952e9f33d1ac4239827b1d
Signed-off-by: Bichao Zheng <bichao.zheng@amlogic.com>
PD#TV-1212
Problem:
the power comsuption is too high for hdmirx
Solution:
1.power down the phy at suspend
2.power on the phy at resume
Verify:
x301
Change-Id: I8920a6b38197109d424d225c4b31f5170b56ca08
Signed-off-by: hongmin hua <hongmin.hua@amlogic.com>
PD#SWPL-2181
Problem:
For some Rx, if the Tx cold boots up, the HPD can't be got in uboot.
That is to say, the output mode is CVBS in uboot, even HDMI cable is
connected. And during kernel boots up, it will reset to hdmi mode.
During the Android boots up, it will set to hdmi mode again. Twice
hdmi mode setting may cause TV flicks.
Solution:
Add parsing colorattribute from uboot and assign $attr to prevent
the second Android mode setting.
Verify:
S905X/P212
Change-Id: I665227bc3e8481acb40c34dde2f5cb3c633c64a2
Signed-off-by: Zongdong Jiao <zongdong.jiao@amlogic.com>
PD#SWPL-1910
Problem:
Black dot on cvbsout when local play 4k
Solution:
Set limit rang when vpp output yuv for cvbs
Verify:
test pass on u200/s905x
Change-Id: Ia3e93078eb1a00d8c974bae8cc373a3a679f8b9f
Signed-off-by: Nian Jing <nian.jing@amlogic.com>
PD#SWPL-1968
Problem:
some error edid need to be parsed
Solution:
add parsing for non-standard dv edid
Verify:
t962e (txlx)
Change-Id: Ia952ed59650fd0b1c665ca03175a38c1cf3ae5bb
Signed-off-by: Yi Zhou <yi.zhou@amlogic.com>
PD#SWPL-2613
Problem:
sr mux in vpp misc is set incorrectly.
Solution:
move the vpp misc operation together
Verify:
verify by x301
Change-Id: Ie813e5b04b97a4481c2e45bcf0c8b4c065fb9f69
Signed-off-by: Brian Zhu <brian.zhu@amlogic.com>
PD#SWPL-2193
Problem:
Node dummy-battery and dummy-charger are android version
dependent, and should be "fdt overlayed"
Solution:
Add fdt overlay file android_p_overlay_dt.dts, and configure
dummy-battery and dummy-charger in it
Verify:
Locally on P212 and R311
Change-Id: I75a27a0ad1253556cae5273f36e0eb828291fd73
Signed-off-by: Jianxiong Pan <jianxiong.pan@amlogic.com>
Signed-off-by: jiamin ma <jiamin.ma@amlogic.com>
PD#SWPL-2193
Problem:
We cannot compile dtbo file in a way like
make ARCH=arm foo.dtbo
Solution:
Add dtbo target and reuse the dtb rules
Verify:
Locally verifed
Change-Id: I34b88e61b409defe553cf5ed1077c160b9a6f350
Signed-off-by: jiamin ma <jiamin.ma@amlogic.com>
PD#SWPL-2193
This adds the following commits from upstream:
b1a60033c110 tests: Add a test for overlays syntactic sugar
737b2df39cc8 overlay: Add syntactic sugar version of overlays
497432fd2131 checks: Use proper format modifier for size_t
22a65c5331c2 dtc: Bump version to v1.4.5
c575d8059fff Add fdtoverlay to .gitignore
b6a6f9490d19 fdtoverlay: Sanity check blob size
8c1eb1526d2d pylibfdt: Use Python2 explicitly
ee3d26f6960b checks: add interrupts property check
c1e7738988f5 checks: add gpio binding properties check
b3bbac02d5e3 checks: add phandle with arg property checks
fe50bd1ecc1d fdtget: Split out cell list display into a new function
62d812308d11 README: Add a note about test_tree1.dts
5bed86aee9e8 pylibfdt: Add support for fdt_subnode_offset()
46f31b65b3b3 pylibfdt: Add support for fdt_node_offset_by_phandle()
a3ae43723687 pylibfdt: Add support for fdt_parent_offset()
a198af80344c pylibfdt: Add support for fdt_get_phandle()
b9eba92ea50f tests: Return a failure code when any tests fail
155faf6cc209 pylibfdt: Use local pylibfdt module
50e5cd07f325 pylibfdt: Add a test for use of uint32_t
ab78860f09f5 pylibfdt: Add stdint include to fix uint32_t
36f511fb1113 tests: Add stacked overlay tests on fdtoverlay
1bb00655d3e5 fdt: Allow stacked overlays phandle references
a33c2247ac8d Introduce fdt_setprop_placeholder() method
0016f8c2aa32 dtc: change default phandles to ePAPR style instead of both
e3b9a9588a35 tests: fdtoverlay unit test
42409146f2db fdtoverlay: A tool that applies overlays
aae22722fc8d manual: Document missing options
13ce6e1c2fc4 dtc: fix sprintf() format string error, again
d990b8013889 Makefile: Fix build on MSYS2 and Cygwin
51f56dedf8ea Clean up shared library compile/link options
21a2bc896e3d Suppress expected error message in fdtdump test
2a42b14d0d03 dtc: check.c fix compile error
a10cb3c818d3 Fix get_node_by_path string equality check
548aea2c436a fdtdump: Discourage use of fdtdump
c2258841a785 fdtdump: Fix over-zealous version check
9067ee4be0e6 Fix a few whitespace and style nits
e56f2b07be38 pylibfdt: Use setup.py to build the swig file
896f1c133265 pylibfdt: Use Makefile constructs to implement NO_PYTHON
90db6d9989ca pylibfdt: Allow setup.py to operate stand-alone
e20d9658cd8f Add Coverity Scan support
b04a2cf08862 pylibfdt: Fix code style in setup.py
1c5170d3a466 pylibfdt: Rename libfdt.swig to libfdt.i
580a9f6c2880 Add a libfdt function to write a property placeholder
ab15256d8d02 pylibfdt: Use the call function to simplify the Makefile
9f2e3a3a1f19 pylibfdt: Use the correct libfdt version in the module
e91c652af215 pylibfdt: Enable installation of Python module
8a892fd85d94 pylibfdt: Allow building to be disabled
741cdff85d3e .travis.yml: Add builds with and without Python library prerequisites
14c4171f4f9a pylibfdt: Use package_dir to set the package directory
89a5062ab231 pylibfdt: Use environment to pass C flags and files
4e0e0d049757 pylibfdt: Allow pkg-config to be supplied in the environment
6afd7d9688f5 Correct typo: s/pylibgfdt/pylibfdt/
Change-Id: Ib23ca90f1e34ed85db3aae9d223fc921e6f2114e
Signed-off-by: Rob Herring <robh@kernel.org>
Signed-off-by: jiamin ma <jiamin.ma@amlogic.com>
PD#SWPL-2608
Problem:
no third thermal zone
Solution:
add third thermal zone for tl1
Verify:
test pass on tl1_x301 and tl1_skt
Change-Id: Ic7ecc41b0866dff90ea3c3224a864160be6cdc04
Signed-off-by: Yunhua Wei <yunhua.wei@amlogic.com>
PD#SWPL-2643
Problem:
cvbsout electric current 1.97mA when suspend
Solution:
close bandgap when suspend
Verify:
verified by x301
Change-Id: I6b87ecd42b0f7876fea18c400f19ddc2d4a7665e
Signed-off-by: Nian Jing <nian.jing@amlogic.com>
PD#SWPL-1690
Problem:
YouTube requires support playback rate 0.25, 0.50, 1.00, 1.25, 1.50,
2.00
Solution:
vsync_slow_factor can be used to slow playback, extend it's value to
support fast playback
Verify:
mesongxl_p212_32_kernel49
Change-Id: I94589a210b8531cc198414b3017c3caf82827565
Signed-off-by: Daogao Xu <daogao.xu@amlogic.com>
PD#SWPL-365
Problem:
System can't use resample function on GVA project.
Solution:
Add resample node in axg_s420_v03gva.dts
Verify:
Passed on s420
Change-Id: Ie48c579e9e9f6e1d61147f5410c95e5bca55b0a7
Signed-off-by: riqun.ou <riqun.ou@amlogic.com>
PD#OTT-778
Problem:
1.kernel received reboot command, but hang in shutdown
Solution:
move tasklet_disable behind tasklet_kill
Verify:
P321
Change-Id: I994c21c5aeb42dbbb4e3b50ccac8376db4d4039d
Signed-off-by: Jihong Sui <jihong.sui@amlogic.com>
PD#172587
Problem:
for dtmb no signal issue
Solution:
update status to "read status" interface
Verify:
verified by t962x2_x301
Change-Id: I6099d2dbe4dcdc23c3a4bd9e489113b26429f2ec
Signed-off-by: Zhiwei Yuan <zhiwei.yuan@amlogic.com>
PD#172587
Problem:
configuration for portB in dtsi can not support
the sdcard and sdio at same time.
Solution:
move the device configuration into dts.
SKT->SDCARD
REF->SDIO
Verify:
test pass on tl1 skt and ref board
Signed-off-by: Ruixuan Li <ruixuan.li@amlogic.com>
Change-Id: I6d1da7a8d0d8d901c4a40a74f04973c155188ade
PD#TV-1287
Problem:
recovey mode always blank
Solution:
set right condition to enable free_scale
Verify:
verified on P321 board
Change-Id: I2f70b9c5436b30156f157a3297a11a2ef1cfec67
Signed-off-by: Jian Cao <jian.cao@amlogic.com>
PD#SWPL-2600
Problem:
osd display half menu when in 1080i
Solution:
osd: adjust free_scale_dst if interlaced
Verify:
verify by p212
Change-Id: Ie9faffbb5942faa317b380ca0cdbee072a30c01f
Signed-off-by: pengcheng chen <pengcheng.chen@amlogic.com>
Signed-off-by: Jian Cao <jian.cao@amlogic.com>
PD#SWPL-2558
Problem:
a black horizontal line below the screen when play video
Solution:
set dummy data alpha
Verify:
verified on p321
Change-Id: I36dc924b9bc89f4f8ea61eb86c6f5bc9199e40ae
Signed-off-by: Jian Cao <jian.cao@amlogic.com>
PD#SWPL-2580
Problem:
The vd1 postblend bit in vpp misc is overwriten.
Solution:
osd: call osd_update_enable if needed
Verify:
verify by p212
Change-Id: I438848dc843ea370d65dc3c6b4befb32d1f2b5f8
Signed-off-by: pengcheng chen <pengcheng.chen@amlogic.com>
PD#SWPL-2580
Problem:
The vd1 postblend bit in vpp misc is overwriten.
Solution:
add more check for vd1 postblend bit in vsync
Verify:
verify by p212
Change-Id: I367e920c13764af41446d7d759aaf8388fb08722
Signed-off-by: Brian Zhu <brian.zhu@amlogic.com>
PD#172587
Problem:
tcon pll performance is not good when frac enabled with old setting
Solution:
update tcon pll setting
Verify:
x301
Change-Id: Ib5deb5c643afa243876c0e4703f835e503fffc2e
Signed-off-by: Evoke Zhang <evoke.zhang@amlogic.com>
PD#172587
Problem:
adc_keypad driver is not enabled in tl1
Solution:
add adc_keypad node in dts
Verify:
test pass on x301
Change-Id: I3946297e710c5753d6f9425ec56bf6def94db941
Signed-off-by: Yingyuan Zhu <yingyuan.zhu@amlogic.com>
PD#SWPL-714
Problem:
The last few seconds of the DD+ stream are not smooth by DTV playback.
Solution:
check the apts and vpts both discontinue,then replay the stream.
Verify:
P321
Change-Id: I6cbbdecc052dfe9fef76b44f36545b231332ee12
Signed-off-by: Yinming Ding <yinming.ding@amlogic.com>
PD#SWPL-1207
Problem:
fix the filckered problem when playing transition
video in sdr tv
Solution:
when dv core2 don't run, the reset can't be executed
Verify:
r321
Change-Id: I719325f1722589e02a40d46442258b0d1e3feb17
Signed-off-by: Yi Zhou <yi.zhou@amlogic.com>
