PD#SWPL-12972
Problem:
vdin regs has been set to default when entering suspend.
Solution:
don't set regs since upper layer will not start again after resume.
Verify:
verified by t962x2_x301
Change-Id: Ic1042e0b1a9ba4482fe79c51606e366f60e31f59
Signed-off-by: zhiwei.yuan <zhiwei.yuan@amlogic.com>
PD#SWPL-12849
Problem:
Update meta and el function was called incorrectly. It
will cause the BL and EL mismatch.
Solution:
Correct the calling sequence to get correct EL frame
Verify:
Verified by AC211
Change-Id: I6c9f0221a9facd361fcd18dcda55cc3967593c1c
Signed-off-by: Brian Zhu <brian.zhu@amlogic.com>
PD#SWPL-9266
Problem:
Using line int rdma will randomly cause dv/hdr register setting
incompleted during one vsync.
Solution:
Disable line int rdma operation. Always enable dv/hdr core
for osd.
Verify:
Verified on galilei revb
Change-Id: I8622896ab0432ef3d9db843aa5ab6d06168aad2a
Signed-off-by: Brian Zhu <brian.zhu@amlogic.com>
PD#SWPL-13177
Problem:
stop endpoint race
Solution:
A counter was used to find out if the stop endpoint completion raced with
the stop endpoint timeout timer. This was needed in case the stop ep
completion failed to delete the timer as it was running on anoter cpu.
The EP_STOP_CMD_PENDING flag was not enough as a new stop endpoint command
may be queued between the command completion and timeout function, which
would set the flag back.
Instead of the separate counter that was used we can detect the race by
checking both the STOP_EP_PENDING flag and timer_pending in the timeout
function.
Verify:
franklin
Change-Id: Ie958ffd530a6bd176d0cf451894a5bd4dece38da
Signed-off-by: Yue Wang <yue.wang@amlogic.com>
PD#SWPL-12722
Problem:
Previously, disabled the SR function when DV on. Since we want
to pass the dv certification without any external flag setting.
But it will affect the PQ function in SR after g12a.
Solution:
Just enable SR function under DV on. Only disable it under
certification mode.
Verify:
Verified on u212
Change-Id: I01bb8cad3fd48246f5af884f84dcc280f85908a1
Signed-off-by: Brian Zhu <brian.zhu@amlogic.com>
PD#SWPL-12424
Problem:
run hs400 166M on sm1 now
Solution:
modify dts
Verify:
passed on sm1_ac200
Change-Id: I28f5f8da3481c9f2a19e27bc8e430a3379ec6b2a
Signed-off-by: Ruixuan Li <ruixuan.li@amlogic.com>
PD#SWPL-12461
Problem:
standby power consumption is too high
Solution:
1.when standby set spdif pin low
2.when standby set GPIOAO_2 low
Verify:
verify by U212
Change-Id: I29699688288b0e09529b7a35a4559ff1fad9891e
Signed-off-by: jiejing.wang <jiejing.wang@amlogic.com>
PD#SWPL-392
Problem:
black screen 1s during kernel boot at 4k30hz.
The reason is vic is 0.
Solution:
Init vic when hdmi init.
Verify:
G12A
Change-Id: I0e055ddb1fcd9ee4c7bc009c9160176a0c101d8b
Signed-off-by: yao liu <yao.liu@amlogic.com>
PD#SWPL-392
Problem:
transition from uboot to kernel is not smooth
Solution:
enable DV output in uboot and kernel check if
dolby enabled in uboot
Verify:
G12B/G12A
Change-Id: I7f310794cf18a54c15a6f059c460e8dcdf9c25aa
Signed-off-by: yao liu <yao.liu@amlogic.com>
PD#TV-9100
Problem:
1.optimize calls with other modules.
Solution:
1.optimize calls with other modules.
2.add ext file interacts with other modules.
3.add sync to prevent NULL pointer crashes.
Verify:
Verified by x301
Change-Id: Id1930400454b020616e0c669cae5f473f498b6de
Signed-off-by: nengwen.chen <nengwen.chen@amlogic.com>
PD#SWPL-12404
Problem:
red and green stripes dividing line flash black line
Solution:
close cue(422/444) except local play(420)
VLSI-yanling suggest
Verify:
TL1
Change-Id: Ied1554d6a0e64e00aea1e692ab6b405f87387095
Signed-off-by: Jihong Sui <jihong.sui@amlogic.com>
PD#SWPL-12778
Problem:
atv signal can't recover after hot plug cable
Solution:
update snow playing nosig state
Verify:
x301
Change-Id: I143ca203c60e5090d41e543306f3929b4544af0c
Signed-off-by: Evoke Zhang <evoke.zhang@amlogic.com>
PD#SWPL-11320
Problem:
current gem driver have not implementted the import interface.
For drm-hwc in android, gralloc allocate the dumb buffer, it
should use the import interface to import the allocated buffer
to the drm driver.
Solution:
implement the gem import interface
Verify:
g12a-u200
Change-Id: I32f7705fd67853a1000875b2af69fcaf700330e1
Signed-off-by: Ao Xu <ao.xu@amlogic.com>
PD#SWPL-12289
Problem:
drm driver has no debug sysfs file
Solution:
add follow sysfs node
1. dump the osd register
/sys/kernel/debug/dri/%minor%/vpu/reg_dump
2. dump the gem buffer image
/sys/kernel/debug/dri/%minor%/vpu/dump
3. set the gem buffer image store path
/sys/kernel/debug/dri/%minor%/vpu/imgpath
4. set 1 to disable the osd plane
/sys/kernel/debug/dri/%minor%/vpu/blank
Verify:
g12a-u200
Change-Id: I10746d65b09d3b530dc22720b8cee669fa120dde
Signed-off-by: Ao Xu <ao.xu@amlogic.com>
PD#SWPL-13092
Problem:
drm driver has no drm support
Solution:
add afbc block support
Verify:
g12a-u200
Change-Id: If2e57b63032e9f93be800bda652b80e560163231
Signed-off-by: Ao Xu <ao.xu@amlogic.com>
PD#TV-8696
Problem:
DMC can't set up from bootargs. For easy debug, we need
set a monitor from bootargs.
Solution:
Add a funciton for this feature. You can using following patten
to set up a DMC monitor:
dmc_montiro=[start_addr],[end_addr],[mask]
Example:
setenv initargs $initargs dmc_monitor=0x0,0x20000000,0xff58
This command set up monitor for following device on GXL:
RANGE:0 - 20000000
MONITOR DEVICE:
HDCP
HEVC
USB3.0
VPU READ1
VPU READ2
VPU READ3
VPU WRITE1
VPU WRITE2
VDEC
HCODEC
GE2DV
Verify:
P212
Change-Id: I864ff97325981fe62f18a4a4a24700b6b6ea7482
Signed-off-by: Tao Zeng <tao.zeng@amlogic.com>
PD#SWPL-12885
Problem:
incorrect bin num of cm histogram
Solution:
have the value reflect register
spec correctly
Verify:
TL1
Change-Id: I77088cae29d716228c80fb31462585fdf67f34d9
Signed-off-by: Xihai Zhu <xihai.zhu@amlogic.com>
PD#TV-8378
Problem:
shutdown test for hdmiin, sometimes audio is silence.
Solution:
if hdmiin is unsatble, set default resample to 48K
Verify:
X301 T972
Change-Id: I31acc38772006646176092968eb23628e23dbaf7
Signed-off-by: Zhe Wang <Zhe.Wang@amlogic.com>
PD#TV-8460
Problem:
ATV str test is stucked
Solution:
disable some audio print messages
Verify:
Verfied on marconi
Change-Id: I284c8afde3a6bc9ff3b8ebfe19360abbb152c3f8
Signed-off-by: Zhe Wang <Zhe.Wang@amlogic.com>
PD#SWPL-9137
Problem:
tl1 add APIs to control pixel probe for debug
Solution:
tl1 add APIs to control pixel probe for debug
Verify:
X301
this commit MUST not be merged into trunk!!!
Change-Id: I3a538ff3afdd80ef5669fac63a3ab5f43b8e1055
Signed-off-by: Yan Wang <yan.wang@amlogic.com>
PD#SWPL-12867
Problem:
after some swtich or on/off operation, minor block
artifect is seen under super black pattern
Solution:
improve the temporal filter calculation and fine tune
related parameter as well
Verify:
TL1
Change-Id: If52360e458934d71438899b88d9246f1279ce524
Signed-off-by: Xihai Zhu <xihai.zhu@amlogic.com>
PD#SWPL-12922
Problem:
the lcd display abnormal
Solution:
do not disable tcon clock,add
CLK_IGNORE_UNUSED flag for tcon clock
Verify:
tl1
Change-Id: If2ac02670c58a21604ce2a36ae353ceddd5ecae5
Signed-off-by: Jian Hu <jian.hu@amlogic.com>
PD#SWPL-12753, PD#TV-8736
Problem:
ft had change the Max range to 4.8G, so adc pll can't
over than 4.8 Ghz.
Solution:
modify pll default setting
Verify:
tl1
Change-Id: I9f489300762f653f967e8c2219c79882236062ab
Signed-off-by: Yong Qin <yong.qin@amlogic.com>
PD#SWPL-10064
Problem:
add di-multi folder
Solution:
1. add di_multi folder;
2. it can be enable by dts;
3. only one of di can be enabled at the same time;
4. no di-pq filse;
Verify:
U212
Change-Id: I8726d2430cf1beb58d0cd37c0358b7ea8e06c414
Signed-off-by: Jihong Sui <jihong.sui@amlogic.com>
PD#TV-7783
Problem:
fix non-standard signal.
Solution:
1.fix non-standard signal when channel scanning and playing.
2.disable demod afc when enable non standard.
Verify:
Verified by x301
Change-Id: I177e6eb5388e554e3166a65e23e3b7bdefac3e97
Signed-off-by: nengwen.chen <nengwen.chen@amlogic.com>
PD#TV-8401
Problem:
Customer needs to access spi nor by the spicc.
Solution:
add spi nor interfaces in spicc driver.
add gd25q80c/FM25Q08A surpport
Verify:
tl1 x301
Change-Id: If94858d46c31fea6b37034a8b1dfe94a9e9f4603
Signed-off-by: Sunny Luo <sunny.luo@amlogic.com>
PD#SWPL-12142
Problem:
signal level of 107% block of super white/black pattern
diff via enable/disable LC
Solution:
it is special limit range pattern but some pixels
value > 235, use full range matrix to avoid clipping,
this is per VLSI'e suggestion
Verify:
tl1
Change-Id: I82d26105a2404218b0c575a578874f88ae75d6c9
Signed-off-by: Xihai Zhu <xihai.zhu@amlogic.com>
PD#SWPL-12515
Problem:
hdr video is dark compared with sdr video
Solution:
1. optimize hdr2sdr oo gain
2. fix hdr2sdr shift
Verify:
verify on TL1
Change-Id: I42cbe7bf2c05c610f25ec34fe00cb4a2b1f7b8a6
Signed-off-by: MingLiang Dong <mingliang.dong@amlogic.com>
PD#SWPL-11555
Problem:
there is jaggy in the seek process
Solution:
add condition for recycle mirror buf
Verify:
TL1
Change-Id: I13c17fd78386ef2cb5f44b4e8c33be3fa92e31e2
Signed-off-by: Jihong Sui <jihong.sui@amlogic.com>
PD#SWPL-10064
Problem:
Prepare for adding multi-di
Solution:
1. add di_local for reserved mem alloc;
2. add dil_attach_ext_api for di_api;
3. move some setting to prob;
4. add interface for di pq;
Verify:
U212
Change-Id: I023694dffabed47fd62ec3fa90b8de9302ac341e
Signed-off-by: Jihong Sui <jihong.sui@amlogic.com>
PD#SWPL-2564
Problem:
hdcp_rx22 ocupy too much CPU resources
Solution:
1.Optimize hdcp_rx22 polling method
2.The driver code should match the hdcp_rx22 whose version is
HDCP2.2 RX0719
Verify:
Android P
Change-Id: I4e1ab48d4eb3b74de070a36cd719c67370f26505
Signed-off-by: yicheng shen <yicheng.shen@amlogic.com>
PD#SWPL-12446
Problem:
Need update eARC port and 5V high or low status to audio
Solution:
update eARC port and 5V high or low status to audio
Verify:
TM2
Change-Id: Ie9891e045010e2020aa9ec64922f2810f6a0cb18
Signed-off-by: yicheng shen <yicheng.shen@amlogic.com>
PD#SWPL-9797
Problem:
ir irq is binded to cup 1 and will re-set in every resume process.
cup 0 wakeup first in resume, if there comes a irq during resume in
a critical time it may occurs concurrency.
Solution:
remove irq affinity in hard decode mode and only use it in learning
mode.
Verify:
w400
Change-Id: I26fad9f67665a2bfe9c6d2455559eb1d95e8b2ba
Signed-off-by: Qianggui Song <qianggui.song@amlogic.com>
PD#SWPL-12483
Problem:
during probe stage, some unused mems are not be freed.
Solution:
free mem after using.
Verify:
gxl_p212
Change-Id: I24a91d81f0db9fb1edbab8f63b4e8c7f940d5947
Signed-off-by: Qianggui Song <qianggui.song@amlogic.com>
PD#SWPL-12779
Problem:
For some RX, the audio block of its EDID contains other audio
type(eg. DD), without PCM.
Solution:
Check the parsed EDID data, add default PCM type
when it contains other audio type w/o PCM.
Verify:
G12/U212
Change-Id: Ia343149ffd4e73970fd76c08a5fde4ee1fe78656
Signed-off-by: Zongdong Jiao <zongdong.jiao@amlogic.com>
