This fix a case that a right part of a window in splice mode
that not disable when the right part isactual_w/h is zero, that
will cause a iommu page fault.
Signed-off-by: Andy Yan <andy.yan@rock-chips.com>
Change-Id: I71cfb819d200e642ef343c2d37f818772aa7e329
Both overlay mode of two Video Ports should be set the
same in splice mode.
Signed-off-by: Andy Yan <andy.yan@rock-chips.com>
Change-Id: If613bc91e18c585140fdcf6f6ac72d0e6aa434e2
dp lane mapping need set vo0grf, but vo0grf is in PD_VO0.
dp controller also in PD_VO0. Setting the vo0grf register
in the dp power on sequence, when the dp controller has
hold the PD_VO0.
Signed-off-by: Zhang Yubing <yubing.zhang@rock-chips.com>
Change-Id: If944daf5ebd71ae9ebaa58dc1f9493a3022a2eaf
This adds "rockchip,u2phy-grf" phandle for USBDP Combo PHY.
Signed-off-by: Frank Wang <frank.wang@rock-chips.com>
Change-Id: Ia170eda889cdf8a45375887f460fcebd48ac88c8
For RK3588 EVB design, the USB vbus is always pull-up, and the USB
controller can not detect that the device was unattached. So based on
the orientation switch process, control the bvalid status via writing
U2PHY GRF when the Type-C controller detected that the device was
attached or unattached.
Signed-off-by: Frank Wang <frank.wang@rock-chips.com>
Change-Id: Ied27dea686895c180ec7b5d33a06af888a9fd64d
Add "rockchip,u2phy-grf" property for usbdp combo PHY.
Signed-off-by: Frank Wang <frank.wang@rock-chips.com>
Change-Id: Ieb58efce53446f45f188e25192e0b3a2835675bc
The Type-C0 vbus circuit of rk3588s tablet has been modified.
Type-C0 is used as the host mode, the charger ic(bq25703)
outputs vbus.
Change-Id: I4940b9dbe90c915256d6b6ec2d56fa6a461bcf76
Signed-off-by: Wang Jie <dave.wang@rock-chips.com>
the minimum region size (HSA,HBP,HACT,HFP) is 4 pixels
which is the dsi2 ip known issues and limitations.
Signed-off-by: Guochun Huang <hero.huang@rock-chips.com>
Change-Id: I15c4fd942ff5cd0fd8c3ad3590b83b24a0c7dd33
the minimum region size (HSA,HBP,HACT,HFP) is 4 pixels
which is the ip known issues and limitations.
Change-Id: I9069ed1c9b6a44b6da27ec0c11d5940f45f45a1c
Signed-off-by: Guochun Huang <hero.huang@rock-chips.com>
The IEC958 status bit is usually set by the userspace after hw_params
has been called, so in order to use whatever is set by the userspace, we
need to implement the prepare hook. Let's add it to the hdmi_codec_ops,
and mandate that either prepare or hw_params is implemented.
Change-Id: I06ccde5d8185955bb60783b597f0205811460968
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Acked-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20210525132354.297468-6-maxime@cerno.tech
Signed-off-by: Sugar Zhang <sugar.zhang@rock-chips.com>
(cherry picked from commit 2fef64eec2)
The IEC958 status bits can be exposed and modified by the userspace
through dedicated ALSA controls.
This patch implements those controls for the hdmi-codec driver. It
relies on a default value being setup at probe time that can later be
overridden by the control put.
The hw_params callback is then called with a buffer filled with the
proper bits for the current parameters being passed on so the underlying
driver can just reuse those bits as is.
Change-Id: I99f37b7e74655687e73a75ba19fd2de8041f8646
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Acked-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20210525132354.297468-5-maxime@cerno.tech
Signed-off-by: Sugar Zhang <sugar.zhang@rock-chips.com>
(cherry picked from commit 7a8e1d4421)
In some situations, like a codec probe, we need to provide an IEC status
default but don't have access to the sampling rate and width yet since
no stream has been configured yet.
Each and every driver has its own default, whereas the core iec958 code
also has some buried in the snd_pcm_create_iec958_consumer functions.
Let's split these functions in two to provide a default that doesn't
rely on the sampling rate and width, and another function to fill them
when available.
Change-Id: I277899145367b219b337bc796f2faee8c4917082
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Reviewed-by: Takashi Iwai <tiwai@suse.de>
Link: https://lore.kernel.org/r/20210525132354.297468-3-maxime@cerno.tech
Signed-off-by: Sugar Zhang <sugar.zhang@rock-chips.com>
(cherry picked from commit 9eafc11f92)
The doc currently mentions that the IEC958 Playback Default should be
exposed on the PCM iface, and the Playback Mask on the mixer iface.
It's a bit confusing to advise to have two related controls on two
separate ifaces, and it looks like the drivers that currently expose
those controls use any combination of the mixer and PCM ifaces.
Let's try to clarify the situation a bit, and encourage to at least have
the controls on the same iface.
Change-Id: Ie0fb033564972f74154c378c644c581dc4d06dfa
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Reviewed-by: Takashi Iwai <tiwai@suse.de>
Link: https://lore.kernel.org/r/20210525132354.297468-2-maxime@cerno.tech
Signed-off-by: Sugar Zhang <sugar.zhang@rock-chips.com>
(cherry picked from commit aa7899537a)
Sound is broken on the DragonBoard 410c (apq8016_sbc) since 5.10:
hdmi-audio-codec hdmi-audio-codec.1.auto: ASoC: error at snd_soc_component_set_jack on hdmi-audio-codec.1.auto: -95
qcom-apq8016-sbc 7702000.sound: Failed to set jack: -95
ADV7533: ASoC: error at snd_soc_link_init on ADV7533: -95
hdmi-audio-codec hdmi-audio-codec.1.auto: ASoC: error at snd_soc_component_set_jack on hdmi-audio-codec.1.auto: -95
qcom-apq8016-sbc: probe of 7702000.sound failed with error -95
This happens because apq8016_sbc calls snd_soc_component_set_jack() on
all codec DAIs and attempts to ignore failures with return code -ENOTSUPP.
-ENOTSUPP is also excluded from error logging in soc_component_ret().
However, hdmi_codec_set_jack() returns -E*OP*NOTSUPP if jack detection
is not supported, which is not handled in apq8016_sbc and soc_component_ret().
Make it return -ENOTSUPP instead to fix sound and silence the errors.
Cc: Cheng-Yi Chiang <cychiang@chromium.org>
Cc: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Fixes: 55c5cc63ab ("ASoC: hdmi-codec: Use set_jack ops to set jack")
Signed-off-by: Stephan Gerhold <stephan@gerhold.net>
Acked-by: Nicolin Chen <nicoleotsuka@gmail.com>
Link: https://lore.kernel.org/r/20210107165131.2535-1-stephan@gerhold.net
Signed-off-by: Mark Brown <broonie@kernel.org>
(cherry picked from commit 2a0435df96)
Change-Id: Id38ce1cdfc80daaac7d77212cecd29dd6fa4e877
Signed-off-by: Sugar Zhang <sugar.zhang@rock-chips.com>
In plugged callback, ELD should be updated from display driver so that
user space can query information from ELD immediately after receiving jack
plugged event.
When jack is unplugged, clear ELD buffer so that user space does not get
obsolete information of unplugged HDMI.
Change-Id: I2245de6e6f7dbc64863267db864dafdd3af95747
Signed-off-by: Cheng-Yi Chiang <cychiang@chromium.org>
Link: https://lore.kernel.org/r/20201118043852.1338877-1-cychiang@chromium.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sugar Zhang <sugar.zhang@rock-chips.com>
(cherry picked from commit 25ce4f2b35)
drivers/gpu/arm/bifrost/mali_kbase_core_linux.c:2955:6: warning: no previous prototype for function 'kbasep_ktrace_dump_wrapper' [-Wmissing-prototypes]
drivers/gpu/arm/bifrost/backend/gpu/mali_kbase_irq_linux.c:182:13: warning: no previous prototype for function 'kbase_gpu_irq_test_handler' [-Wmissing-prototypes]
drivers/gpu/arm/bifrost/backend/gpu/mali_kbase_irq_linux.c:210:5: warning: no previous prototype for function 'kbase_set_custom_irq_handler' [-Wmissing-prototypes]
drivers/gpu/arm/bifrost/platform/rk/mali_kbase_config_rk.c:241:5: warning: no previous prototype for function 'rk_kbase_device_runtime_init' [-Wmissing-prototypes]
drivers/gpu/arm/bifrost/platform/rk/mali_kbase_config_rk.c:246:6: warning: no previous prototype for function 'rk_kbase_device_runtime_disable' [-Wmissing-prototypes]
drivers/gpu/arm/bifrost/platform/rk/mali_kbase_config_rk.c:266:5: warning: no previous prototype for function 'kbase_platform_early_init' [-Wmissing-prototypes]
drivers/gpu/arm/bifrost/platform/rk/mali_kbase_config_rk.c:274:6: warning: no previous prototype for function 'kbase_platform_rk_shutdown' [-Wmissing-prototypes]
drivers/gpu/arm/bifrost/platform/rk/mali_kbase_config_rk.c:460:5: warning: no previous prototype for function 'kbase_platform_rk_init_opp_table' [-Wmissing-prototypes]
drivers/gpu/arm/bifrost/ipa/mali_kbase_ipa.c:399:5: warning: no previous prototype for function 'kbase_scale_static_power' [-Wmissing-prototypes]
Signed-off-by: Tao Huang <huangtao@rock-chips.com>
Change-Id: I47be45c9ac2b7f9eedec1977d358b535f7fbd795
enable ov13855 camera driver used for rk3588s-tablet
Signed-off-by: Jianwei Fan <jianwei.fan@rock-chips.com>
Change-Id: Idd3b50b20fc451c18f57eac337ac58c219f957e4
This patch add UTMI clk from usb2 phy for usb2 host controllers.
Signed-off-by: William Wu <william.wu@rock-chips.com>
Change-Id: I4f7f297ffb09aa1a9d81e625c67933883d98588d
Because the usb3_0 super-speed driver is ready, let
remove the maximum-speed limit.
Signed-off-by: William Wu <william.wu@rock-chips.com>
Change-Id: Iebe2ebdeddb2942f6bb333b2bedf31f7f3c02557
