PD#SWPL-3010
Problem:
the arc can't work
Solution:
add the port map for connect status
Verify:
verified on darwin
Change-Id: I9f886c35de8670acdc431185bb26aa1836a8c150
Signed-off-by: Hongmin Hua <hongmin.hua@amlogic.com>
PD#SWPL-2776
Problem:
did not release the free node of rsv information
Solution:
release free node and set bit mask in right way
Verify:
S400
Change-Id: I781f2374b91ca1e7cd1a66e75fc554318737c377
Signed-off-by: Yi Zeng <yi.zeng@amlogic.com>
PD#SWPL-1664
Problem:
DTV search menu does not have ISDB-T entry
Solution:
add ISDB-T system support.
Verify:
verified by einstein
Change-Id: Ie0bdc988d53256487e24c3123320b50f2a58cdf3
Signed-off-by: nengwen.chen <nengwen.chen@amlogic.com>
PD#SWPL-3009
Problem:
32bit frontend app can't call ioctl in 64bit-kernel
Solution:
Add 32bit define in header and handle in dvb_frontend in 64bit-kernel
Verify:
Verify at android_p at R311
Change-Id: I63178803cfb1cf7d670e3c2b55f104e97f5afa63
Signed-off-by: Chuangcheng Peng <chuangcheng.peng@amlogic.com>
PD#SWPL-1909
Problem:
If physical address of a memory location is not in linear mapping
range, then any caller with phys_to_xxxx to get a pointer will
cause bug.
Solution:
Check input address range for phys_to_xxxx to get a BUG output.
This change is used for debug
Verify:
P212
Change-Id: I13bcaa3983e2d730b8d2bc03cd28c62585f49969
Signed-off-by: tao zeng <tao.zeng@amlogic.com>
PD#SWPL-2735
Problem:
bt remote re-connected fail
Solution:
control bluetooth opwer up
Verify:
Verifying on Public Edition r311
Change-Id: I8c74442894f606d5afd992e52d6c80bada0aed9f
Signed-off-by: Qiu Zeng <qiu.zeng@amlogic.com>
PD#SWPL-2948
Problem:
Miss the sr core1 bit mask to cause display abnormal
Solution:
Add the bit mask for sr core1
Verify:
Test pass by x301
Change-Id: I742d86b610a9748adad7c143d7a85c6796d3c8f7
Signed-off-by: Brian Zhu <brian.zhu@amlogic.com>
PD#SWPL-2685
Problem:
the atom switch wrong channel when wakeup by device
Solution:
set the phy port the same as ui id
Verify:
atom
Change-Id: I4e43f83af5bb30a2388df7e7030f135c3f0830ad
Signed-off-by: Hongmin Hua <hongmin.hua@amlogic.com>
PD#OTT-1025
Problem:
not support gen clock
Solution:
add gen clock
Verify:
test passed on g12a u200
Change-Id: I5199289d3cd1483fffbbd41f8d104369214ba302
Signed-off-by: Jian Hu <jian.hu@amlogic.com>
PD#OTT-1025
Problem:
don't support gen_clk_ee and gen_clk_ao pin groups
Solution:
add gen_clk_ee/ao pin groups according to the corepinmux document
Verify:
test pass on U200
Change-Id: Ia3e61079def285c482d8dc4957b5f9e7db35847d
Signed-off-by: Xingyu Chen <xingyu.chen@amlogic.com>
PD#SWPL-1219
Problem:
On arm64, thread stack is 16KB for each task. If running task number
is large, this type of memory may over 40MB. It's a large amount on
small memory platform. But most case thread only use less 4KB stack.
It's waste of memory and we need optimize it.
Solution:
1. Pre-allocate a vmalloc address space for task stack;
2. Only map 1st page for stack and handle page fault in EL1
when stack growth triggered exception;
3. handle stack switch for exception.
Verify:
p212
Change-Id: I47f511ccfa2868d982bc10a820ed6435b6d52ba9
Signed-off-by: tao zeng <tao.zeng@amlogic.com>
PD#SWPL-1076
Problem:
Kplayer 4KDemo.mp4, show green screen.
Solution:
add DI_IF1_GEN_REG set when no mirror
Verify:
p212
Change-Id: I2cfb27068393832fb47498ebdb9b93349f1fe635
Signed-off-by: Jihong Sui <jihong.sui@amlogic.com>
PD#SWPL-2551
Problem:
range of mouse is wrong under 4K mode
Solution:
new cursor coordinate paras without using scale
add osd_cursor_hw_no_scale() to deal with it.
Verify:
verified on P212
Change-Id: I1748df569b96522eb58dc00af862983bca17815a
Signed-off-by: Jian Cao <jian.cao@amlogic.com>
PD#SWPL-1081
Problem:
Need get freed handle for DRM frame mode
Solution:
Add ioctl cmd to get freed handle
Verify:
P212
Change-Id: Ic0ce64061e334fdea5580d9f92b3e0b58caa88eb
Signed-off-by: Tao Guo <tao.guo@amlogic.com>
PD#SWPL-2181
Problem:
For some Rx, if the Tx cold boots up, the HPD can't be got in uboot.
That is to say, the output mode is CVBS in uboot, even HDMI cable is
connected. And during kernel boots up, it will reset to hdmi mode.
During the Android boots up, it will set to hdmi mode again. Twice
hdmi mode setting may cause TV flicks.
Solution:
Add parsing colorattribute from uboot and assign $attr to prevent
the second Android mode setting.
Verify:
S905X/P212
Change-Id: I665227bc3e8481acb40c34dde2f5cb3c633c64a2
Signed-off-by: Zongdong Jiao <zongdong.jiao@amlogic.com>
PD#SWPL-1690
Problem:
YouTube requires support playback rate 0.25, 0.50, 1.00, 1.25, 1.50,
2.00
Solution:
vsync_slow_factor can be used to slow playback, extend it's value to
support fast playback
Verify:
mesongxl_p212_32_kernel49
Change-Id: I94589a210b8531cc198414b3017c3caf82827565
Signed-off-by: Daogao Xu <daogao.xu@amlogic.com>
PD#SWPL-2512
Problem:
isp reserved mem too large
Solution:
reduce isp mem to 256M
Verify:
A311D-W400
Change-Id: I33ee2872daf961da5f0ba4ba4810b0ac9690e45f
Signed-off-by: Jiacheng Mei <jiacheng.mei@amlogic.com>
PD#SWPL-2448
Problem:
can not read dnlp scurv_mid2 value
Solution:
fix the error
Verify:
t962x_r311
Change-Id: I7a7df769dd117fd83164065f6df8e3ae82c2499f
Signed-off-by: Bencheng Jing <bencheng.jing@amlogic.com>
PD#OTT-2062
Problem:
Boot up time with power cable is longer than boot up with usb cable
Solution:
config hw rng with dts
Verify:
android p + u212
Change-Id: I61613e945dbc9be06f2cbb29aae5043c84fca1de
Signed-off-by: Chao Liu <chao.liu@amlogic.com>
(cherry picked from commit aabb72a65e)
