PD#SWPL-6147
Problem:
I2S has 8 channels but spdif only 2.
Need map every single i2s lane to spdif sharebuffer.
Solution:
Add the DTS setting MASKS as former does.
Verify:
Local tested.
Change-Id: If212fc1b9c937a42778682948773874951b8a55a
Signed-off-by: Shuai Li <shuai.li@amlogic.com>
Conflicts:
sound/soc/amlogic/auge/tdm.c
PD#SWPL-5961
Problem:
There is no mute control for tas5782
Solution:
Add mute function for tas 5782
Verify:
A113
Change-Id: I75f8b82a359778f28494636fe76c7bc4db848643
Signed-off-by: yujie.wu <yujie.wu@amlogic.com>
PD#TV-2362
Problem:
A DC voltage is always there about 300ms.
And coupled with LRCLK and SCLK which
may cause a toggle an DAC side.
Solution:
Pull down the data pin to clear
the DC level.
Verify:
Local verified.
Change-Id: Ib7aff22c44dcec2f653b7ed29495e5e52c16e038
Signed-off-by: Shuai Li <shuai.li@amlogic.com>
PD#SWPL-2952
Problem:
High voltage will cause the tdmout
data pin wrong I2S data which cause pop.
Solution:
Disable the bias of gpio.
Verify:
I2S data will be low when I2s closed.
Change-Id: If5d68e0f30df074f528dfec21cbe297795bc4ea7
Signed-off-by: Shuai Li <shuai.li@amlogic.com>
Conflicts:
arch/arm64/boot/dts/amlogic/tm2_t962e2_ab311.dts
arch/arm64/boot/dts/amlogic/tm2_t962x3_ab301.dts
sound/soc/amlogic/auge/tdm.c
PD#SWPL-5845
Problem:
audio playback too slow
Solution:
change audio volume slew time
Verify:
Locally test on X301
Change-Id: I48c920037cac852aaa01818bb02eaa8991c1df6b
Signed-off-by: Zhe Wang <Zhe.Wang@amlogic.com>
PD#SWPL-4734
Problem:
There is no volume control for tas5782
Solution:
Add ch1/ch2 volume control for tas5782
Verify:
A113
Change-Id: I1e866a2bc024713278aea0c19cc8c91084a24b90
Signed-off-by: yujie.wu <yujie.wu@amlogic.com>
Conflicts:
sound/soc/codecs/amlogic/tas5782m.c
PD#TV-1808,TV-1809,TV-1810,TV-1811
Problem:
HW EQ on TL1 doesn't work
Solution:
Add kcontrol of EQ setting and getting
Verify:
test on X301
Change-Id: Iea1525b4a57241a99389c746c0238d96424df316
Signed-off-by: Zhe Wang <Zhe.Wang@amlogic.com>
Conflicts:
MAINTAINERS
PD#SWPL-5300
Problem:
share buffer is not alaway used for tdm and spdif,
but raw data needs to output by spdif.
this would lead to spk silence for dual output
Solution:
share buffer can be occupied by later module.
when tdm and spdif output in share buffer, then play spdif,
spdif will release from share buffer,
only frddr is only used for tdm, another new frddr is used for spdif.
Verify:
x301
Change-Id: Ib0c2e02e575f496c0b0911d347857ede0d0cfa14
Signed-off-by: Xing Wang <xing.wang@amlogic.com>
PD#SWPL-3655
Problem:
spdif output 8 channel, channel map in wrong order.
Solution:
reset spdif before enable as soon as quickly.
modification is limited for tl1 now
Verify:
x301
Change-Id: I224032390404be85c77d7436a9be9148df09c997
Signed-off-by: Xing Wang <xing.wang@amlogic.com>
Conflicts:
sound/soc/amlogic/auge/tdm.c
PD#SWPL-5219
Problem:
audio glitch at tdm startup
Solution:
Pad 0 data to clear the remaining data
in the module.
Verify:
Local tested.
Change-Id: Iab526c6893a32030799567b57e05e7bb11b8fea0
Signed-off-by: Shuai Li <shuai.li@amlogic.com>
Conflicts:
sound/soc/amlogic/auge/tdm.c
PD#SWPL-4278
Problem:
spdif out clk is related to tdm clk for share buffer.
For play raw data 32k/44.1k, it's not correct for spdif out clk.
Solution:
separate spdif out clk and tdm clk
Verify:
x301
Change-Id: Ie6e3d7413d9577c9c80ea90e8b1f9ff4bf3eefcf
Signed-off-by: Xing Wang <xing.wang@amlogic.com>
Conflicts:
sound/soc/amlogic/auge/spdif_hw.c
PD#SWPL-3435
Problem:
P321 doesn't support DTS HD decoding
Solution:
In HDMI RX module, we add a new field to
indicate whether the input audio is HBR.
With this info, hal can enable the PAO
mode to decode the HBR audio.
Verify:
P321
Change-Id: I6fd180e6636905f5119fe1d313214d4b56d07d5e
Signed-off-by: yujie.wu <yujie.wu@amlogic.com>
Conflicts:
drivers/amlogic/media/vin/tvin/hdmirx/hdmi_rx_drv.h
drivers/amlogic/media/vin/tvin/hdmirx/hdmi_rx_hw.c
PD#SWPL-5664
Problem:
pcr is probably adjust when test AL1 eyepatch test case
Solution:
the time is not accurate when check pcr and omx_pts differ, because
omx_pts is used the value that be set, but pcr is current. Here add
compensation for omx_pts
Verify:
verify by nts
Change-Id: I3e0f6f006fd79cf7cac4148fd18da72111a333c7
Signed-off-by: shuanglong.wang <shuanglong.wang@amlogic.com>
Conflicts:
drivers/amlogic/media/video_sink/video.c
PD#SWPL-5302
Problem:
For dongle products, it is connected to TV directly, and some
parameters are different from mbox.
Solution:
Add dongle mode for driver's usage
Verify:
U211/S905Y2
Change-Id: Ibe45b167800d3b830d78ca8e9d7b67efd64d8564
Signed-off-by: Zongdong Jiao <zongdong.jiao@amlogic.com>
Conflicts:
drivers/amlogic/media/vout/hdmitx/hdmi_tx_20/hw/hw_g12a.c
PD#SWPL-4705
Problem:
In 61207 patch, the define HDMI_IEEE_OUI is conflicted with the kernel
head file include/linux/hdmi.h
Solution:
rename HDMI_IEEE_OUI
Verify:
GXL/P212
Change-Id: I75a12734e85478f22edf0b48636ed86e60302b58
Signed-off-by: Zongdong Jiao <zongdong.jiao@amlogic.com>
Conflicts:
drivers/amlogic/media/vout/hdmitx/hdmi_tx_20/hdmi_tx_main.c
PD#SWPL-4705
Problem:
Lack ALLM function
Solution:
Add ALLM function
Verify:
GXL/P212
If Rx supports ALLM, then
echo 1 > /sys/class/amhdmitx/amhdmitx0/allm_mode
otherwise it will set failed, cat allm_mode and will get 0.
Change-Id: I00233e5a5aac133b405590e7df78c7c4805ed0ef
Signed-off-by: Zongdong Jiao <zongdong.jiao@amlogic.com>
Conflicts:
drivers/amlogic/media/vout/hdmitx/hdmi_tx_20/hdmi_tx_main.c
PD#SWPL-7009
Problem:
hotplug hdmi causes system crash
when unplug hdmi display mode is null, hwc hasn't received
event and post frame normal but osd vsync lost, which caused
wait hw vsync timeout(1s), and fd leak.
Solution:
when process every frame, if display mode is null, exit frame process
just process fence.
Verify:
verified on Raven, franklin
Change-Id: Icbe7cd76776e46a6ed79c6cee3ea05772cc5f9d2
Signed-off-by: Pengcheng Chen <pengcheng.chen@amlogic.com>
PD#SWPL-7039
Problem:
bring up osd for TM2
frame just display on half screen
Solution:
fix field_out_en value from array
Verify:
Verified on T962e2_ab319
Change-Id: Id07f3d813242f031125fcac11d3fa05205895448
Signed-off-by: Jian Cao <jian.cao@amlogic.com>
PD#SWPL-6596
Problem:
bring up osd for TM2
Solution:
set osd1 scaler before osd blend
Verify:
Verified on T962e2_ab319
Change-Id: I9e7d5fa83b2edc8e9359371695ea46fa3b39e09c
Signed-off-by: Pengcheng Chen <pengcheng.chen@amlogic.com>
PD#SWPL-85
Problem:
Upper layer need control osd and video layer zorder
Solution:
1.Add video layer zorder interface by sysfs and ioctl
2.Switch the osd and video layer order in vsync
Verify:
Verify on U212
Change-Id: Ic50e81784b865cc57e4ab9a63d74806f7a8721cf
Signed-off-by: Brian Zhu <brian.zhu@amlogic.com>
Conflicts:
drivers/amlogic/media/video_sink/video.c
include/linux/amlogic/media/video_sink/vpp.h
PD#SWPL-5172
Problem:
vbyone stable is easily affected by ESD
Solution:
increase hw filter time to anti ESD after vbyone stable,
but lower the hw filter time when vbyone training,
to avoid side effect to vbyone fsm working.
only support in TL1.
Verify:
x301
Change-Id: If8a8b14a47262abd682f5c95185e82cf3c0f58f2
Signed-off-by: Evoke Zhang <evoke.zhang@amlogic.com>
Conflicts:
drivers/amlogic/media/vout/lcd/lcd_tv/lcd_drv.c
PD#SWPL-3938
Problem:
add wait for gpio input value support in lcd power step
Solution:
add wait for gpio input value support in lcd power step
Verify:
verify by t962x-r311
Change-Id: Ie1c4ec6f9f5d91332b6b20e1d1bd2adde17e547b
Signed-off-by: Shaochan Liu <shaochan.liu@amlogic.com>
Conflicts:
drivers/amlogic/media/vout/lcd/lcd_vout.c
PD#SWPL-3702
Problem:
local dimming need analog pwm function
Solution:
add analog pwm support
Verify:
x301
Change-Id: I502bb7505947c1f3670f44d0d307f9546f1d57fd
Signed-off-by: Evoke Zhang <evoke.zhang@amlogic.com>
Conflicts:
arch/arm/boot/dts/amlogic/mesontl1_t309-panel.dtsi
arch/arm/boot/dts/amlogic/mesontl1_x301-panel.dtsi
arch/arm/boot/dts/amlogic/mesontxlx_r311-panel.dtsi
arch/arm64/boot/dts/amlogic/mesontl1_t309-panel.dtsi
arch/arm64/boot/dts/amlogic/mesontl1_x301-panel.dtsi
drivers/amlogic/media/vout/backlight/aml_ldim/ldim_dev_drv.c
drivers/amlogic/media/vout/backlight/aml_ldim/ldim_drv.h
include/linux/amlogic/media/vout/lcd/aml_ldim.h
PD#TV-3683
Problem:
1. write pll m will cause vbyone lockn unlock.
Solution:
1.not change m,f at the sametime
2.reduce the frequency of write m and f
Verify:
tl1
Change-Id: Ia1ff93122d8b2ae355eae73b0094f8e09edba1cd
Signed-off-by: Yong Qin <yong.qin@amlogic.com>
Conflicts:
drivers/amlogic/media/enhancement/amvecm/vlock.c
drivers/amlogic/media/enhancement/amvecm/vlock.h
PD#TV-3683
Problem:
1.pretect display pll set in vlock, m and frac value
write at the sametime.
Solution:
1.optmis vlock flow
2.add notify_callback when mode change
Verify:
tl1
Change-Id: I72fab117c5b7247659c5c08eeff62fbc4d421839
Signed-off-by: Yong Qin <yong.qin@amlogic.com>
Conflicts:
drivers/amlogic/media/enhancement/amvecm/vlock.c
drivers/amlogic/media/enhancement/amvecm/vlock.h
PD#SWPL-4246
Problem:
the screen always flash after switch PAL to NTSC in AVin
Solution:
do not change pll M value, M value will case v by one fail
Verify:
verified on tl1 android p
Change-Id: Ib5ea8dfef1c40af5535e69fdc9241a7f77b4a7dd
Signed-off-by: Yong Qin <yong.qin@amlogic.com>
Conflicts:
drivers/amlogic/media/enhancement/amvecm/amvecm.c
drivers/amlogic/media/enhancement/amvecm/vlock.c
drivers/amlogic/media/enhancement/amvecm/vlock.h
PD#SWPL-4317
Problem:
for video peek, before audio post audio start, video may have rended.
Solution:
do not post video start for video peek, all wait for audio start to
start pcr
Verify:
verify by p212
Change-Id: If5656154e30613164465f84c44d3fd1ee386d654
Signed-off-by: shuanglong.wang <shuanglong.wang@amlogic.com>
Conflicts:
drivers/amlogic/media/video_sink/video.c
PD#SWPL-2681
Problem:
Kernel stack usage is large when running many tasks.
Solution:
Map kernel stack to module space and handle page-fault
for stack fault. This can save about 50% memory of stack
usage
Verify:
p212
Change-Id: Ie894bc8f00cb525ddf8ac63c6d99d9c6e937fdc0
Signed-off-by: tao zeng <tao.zeng@amlogic.com>
Conflicts:
arch/arm/include/asm/memory.h
arch/arm/include/asm/thread_info.h
arch/arm/kernel/entry-armv.S
arch/arm/kernel/unwind.c
drivers/amlogic/memory_ext/Kconfig
drivers/amlogic/memory_ext/vmap_stack.c
PD#SWPL-3088
Problem:
g12b big-little cluster is different from other SoC with pmu
interrupts and registers.
software modifications must adapt to the difference.
Solution:
modify
Verify:
u200 w400
Change-Id: If9217c1025dff5c17d51790f8c216e31b7d6532b
Signed-off-by: Hanjie Lin <hanjie.lin@amlogic.com>
Conflicts:
arch/arm/boot/dts/amlogic/mesongxl.dtsi
arch/arm/boot/dts/amlogic/mesongxl_sei210.dtsi
arch/arm/boot/dts/amlogic/mesongxm.dtsi
arch/arm/boot/dts/amlogic/mesontxl.dtsi
arch/arm/include/asm/perf_event.h
arch/arm/kernel/perf_event_v7.c
arch/arm64/boot/dts/amlogic/mesong12a.dtsi
arch/arm64/boot/dts/amlogic/mesongxl.dtsi
arch/arm64/boot/dts/amlogic/mesongxl_sei210.dtsi
arch/arm64/boot/dts/amlogic/mesongxm.dtsi
arch/arm64/boot/dts/amlogic/mesontxl.dtsi
PD#SWPL-3294
Problem:
unify lcd pinmux usage in dts
Solution:
change lcd pinmux usage to be recommend by linux upstream
Verify:
verify by t962x_r311
Change-Id: I7069b5272fa779575a8111b12a3ed835ab72cd02
Signed-off-by: Shaochan Liu <shaochan.liu@amlogic.com>
Conflicts:
arch/arm/boot/dts/amlogic/txlx_t962x_r311_1g.dts
PD#SWPL-915
Problem:
DOLBY only sets the enhancement for the first frame ->
Vd sets cur_dispubf2 according to enhance ->
codec_mm keeps the last frame according to cur_dispbuf2,
so it fails -> AFBC2 access to the released content causes the trigger.
Solution:
close afbc2
Verify:
r321
Change-Id: I03c431a6ea11b8aabf97b1f0b21f717024be2f62
Signed-off-by: Yi Zhou <yi.zhou@amlogic.com>
Conflicts:
drivers/amlogic/media/video_sink/video.c
PD#SWPL-4255
Problem:
UI disable SDR TO HDR, reboot BOX,
TV flicker white and then display ok when connect hdr tv
Solution:
dr2hdr function set by uplayer, kernel default disable
Verify:
verify on G12A
Change-Id: Iea5a1e0be9b5665bb7deb785b6b5faa702ef1664
Signed-off-by: MingLiang Dong <mingliang.dong@amlogic.com>
Conflicts:
drivers/amlogic/media/enhancement/amvecm/amvecm.c
PD#SWPL-2952
Problem:
Pop noise could be heard
when switching between sources.
Solution:
1. Add stream digital mute functions.
2. continuous clock to eliminate
the clk reset issue.
Verify:
Local verified.
Change-Id: I372f4c03aaf875d75aa903c9c2dfda00619af000
Signed-off-by: Shuai Li <shuai.li@amlogic.com>
Conflicts:
sound/soc/amlogic/auge/tdm_hw.c
sound/soc/amlogic/auge/tdm_hw.h
PD#SWPL-2645
Problem:
play ddp source, then play pcm source, no sound
Solution:
1. fix same source control and channel map issue
2. i2s 8ch, spdif 2ch, channels are not mapped, make spdif 8 channel mask
3. when same source used, keep mpll use same mpll
Verify:
x301
Change-Id: I2fe4bbcbcbfff0a1c1a6cebf61d1da5aba9b7a9d
Signed-off-by: Xing Wang <xing.wang@amlogic.com>
Conflicts:
arch/arm64/boot/dts/amlogic/tm2_t962e2_ab311.dts
arch/arm64/boot/dts/amlogic/tm2_t962x3_ab301.dts
