CONFIG_BCMDHD_PCIE and CONFIG_BCMDHD_SDIO can only be selected
from two configurations, since that bcmdhd driver cannot be compatible
with it at present. SDIO interfaces are widely used by default, at least
on our EVB boards.
Tested on RK3399 EVB IND boards:
export CROSS_COMPILE=aarch64-linux-gnu-
make ARCH=arm64 rockchip_linux_defconfig rk3399_linux.config
make ARCH=arm64 rk3399-evb-ind-lpddr4-linux.img -j8
Signed-off-by: Caesar Wang <wxt@rock-chips.com>
Change-Id: I7c1c416b58f618e1cee8f76608c24f750437bfa1
CONFIG_MALI_CSF_SUPPORT is not used on RK356X Socs, that will cause
the mali is abnormal with RK356x Socs.
CONFIG_BCMDHD_PCIE and CONFIG_BCMDHD_SDIO can only be selected
from two configurations, since that bcmdhd driver cannot be compatible
with it at present. SDIO interfaces are widely used by default, at least
on our EVB boards.
Tested on RK3568 EVB1 boards:
export CROSS_COMPILE=aarch64-linux-gnu-
make ARCH=arm64 rockchip_linux_defconfig rk3568_linux.config
make ARCH=arm64 rk3568-evb1-ddr4-v10-linux.img -j8
Signed-off-by: Caesar Wang <wxt@rock-chips.com>
Change-Id: Iea3c3d70fabe9920b95d6b096028b4d73c5b39f1
It's allowed to run without firmware protected mode entry.
While the customer of RK3588 might be troubled by the log.
Change-Id: I9f1b7c795f2095f1851692c93a7f4598acf702fc
Signed-off-by: Zhen Chen <chenzhen@rock-chips.com>
cat /proc/rkcrypto will show crypto debug info.
Change-Id: I1a295ccf5b8c71036892e866b46d5427d5e53e93
Signed-off-by: Lin Jinhan <troy.lin@rock-chips.com>
use rk_rng_readl as uniform interface for read registers.
Signed-off-by: Lin Jinhan <troy.lin@rock-chips.com>
Change-Id: If3f4225d10153d469bb56967aa5abcea8f23d572
Use CRYPTO_READ or PKA_READ as uniform interface for poll function.
Signed-off-by: Lin Jinhan <troy.lin@rock-chips.com>
Change-Id: I47e9e1efd0b4c66efe59eac3253fdaf2723e5c45
Solve the problem that LRCK level amplitude is not enough
Signed-off-by: Binyuan Lan <lby@rock-chips.com>
Change-Id: Id79df3de70cd525e1d5425d4177d774a514c45da
DIGEN_CLKE can only be controlled when the amplifier is turned off
Signed-off-by: Binyuan Lan <lby@rock-chips.com>
Change-Id: I5758cab8f20bd2ede008d1ad138cdadcaa55e39d
This reverts commit 11a0bfb97cb9bf50d5afb8819381d6be8312bd00.
Signed-off-by: Jianlong Wang <jianlong.wang@rock-chips.com>
Change-Id: I953108f01466c5bd52ebc86046d07011dbabc857
RK3588 platform may miss line irq if the line state is not in
SE0(D+ low, D- low) before usb controller call phy init function
and enable line irq.
To resolve this, when usb controller call phy init function, we
can clear host_disconnect state if the line state is not in SE0
which means there is an usb device connected to the port.
Signed-off-by: Jianwei Zheng <jianwei.zheng@rock-chips.com>
Change-Id: Icb3f1abd790f16ddd66bbc098e0c06cc5d922d86
To support clang-14 otherwise too much warnings generated.
Signed-off-by: Tao Huang <huangtao@rock-chips.com>
Change-Id: If48817e358d076858a9808dfdc26e4b142858cc9
Not all fpga need PM, enable RGA_DISABLE_PM to disable PM when not needed.
Signed-off-by: Yu Qiaowei <cerf.yu@rock-chips.com>
Change-Id: I9ebc20c1795eb30d60a1cb727a7a7b91b5b5728e
When RGA2_USE_MASTER_MODE is 1, master mode is used, when it is 0,
slave mode is used.
Signed-off-by: Yu Qiaowei <cerf.yu@rock-chips.com>
Change-Id: I0b8356e02f58b5fadcec41dd310bd55192d2aa47
When in ABB mode, ovlap needs to enable top/bottom alpha read enable
at the same time.
Because ovlap_offset is not 16 aligned, the bottom will be read in
16*16 blocks. If alpha reading is not enabled at this time, this part
of the alpha channel will be lost.
Signed-off-by: Yu Qiaowei <cerf.yu@rock-chips.com>
Change-Id: Id18328e4385064d6be7e0574e344cc5413d20df0
When dwc3_gadget_ep_cleanup_completed_requests() called to
dwc3_gadget_giveback() where the dwc3 lock is released, other thread is
able to execute. In this situation, usb_ep_disable() gets the chance to
clear endpoint descriptor pointer which leds to the null pointer
dereference problem. So needs to move the null pointer check to a proper
place.
Example call stack:
Thread#1:
dwc3_thread_interrupt()
spin_lock
-> dwc3_process_event_buf()
-> dwc3_process_event_entry()
-> dwc3_endpoint_interrupt()
-> dwc3_gadget_endpoint_trbs_complete()
-> dwc3_gadget_ep_cleanup_completed_requests()
...
-> dwc3_giveback()
spin_unlock
Thread#2 executes
Thread#2:
configfs_composite_disconnect()
-> __composite_disconnect()
-> ffs_func_disable()
-> ffs_func_set_alt()
-> ffs_func_eps_disable()
-> usb_ep_disable()
wait for dwc3 spin_lock
Thread#1 released lock
clear endpoint.desc
Fixes: 2628844812 ("usb: dwc3: gadget: Fix null pointer exception")
Cc: stable <stable@kernel.org>
Signed-off-by: Albert Wang <albertccwang@google.com>
Link: https://lore.kernel.org/r/20220518061315.3359198-1-albertccwang@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
(cherry picked from commit 3c5880745b)
Change-Id: I15ad3eab4b946f4db6e52035c5dd0d6b3435472e
Signed-off-by: Tao Huang <huangtao@rock-chips.com>
When dma_buf_stats_setup() fails, it closes the dmabuf file which
results into the calling of dma_buf_file_release() where it does
list_del(&dmabuf->list_node) with out first adding it to the proper
list. This is resulting into panic in the below path:
__list_del_entry_valid+0x38/0xac
dma_buf_file_release+0x74/0x158
__fput+0xf4/0x428
____fput+0x14/0x24
task_work_run+0x178/0x24c
do_notify_resume+0x194/0x264
work_pending+0xc/0x5f0
Fix it by moving the dma_buf_stats_setup() after dmabuf is added to the
list.
Fixes: bdb8d06dfe ("dmabuf: Add the capability to expose DMA-BUF stats in sysfs")
Signed-off-by: Charan Teja Reddy <quic_charante@quicinc.com>
Tested-by: T.J. Mercier <tjmercier@google.com>
Acked-by: T.J. Mercier <tjmercier@google.com>
Cc: <stable@vger.kernel.org> # 5.15.x+
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Christian König <christian.koenig@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1652125797-2043-1-git-send-email-quic_charante@quicinc.com
(cherry picked from commit ef3a6b7050)
Change-Id: Ie282a36291072b2c6c374f8c1924030ff85d29c6
Signed-off-by: Tao Huang <huangtao@rock-chips.com>
The flag was missing which makes i2s5/6 src clock rate can't be changed.
Change-Id: I3ad5f39e8a2826d0b18d554c3a53b55f219028d8
Signed-off-by: Joseph Chen <chenjh@rock-chips.com>
