This patch adds USB_QUIRK_RESET for Alcor Micro
Flash Drive (idVendor=058f, idProduct=6387) to
fix read/write issue after system resume from
deep sleep.
Change-Id: I35e0d511a80255a18eb842412ff9905c039df9bf
Signed-off-by: William Wu <william.wu@rock-chips.com>
1.fix lsc error of first frame
2.fix scl update hold when isp working
3.fix resolution config for unite mode
4.resume to restore dhaz iir data
Change-Id: I070b0dbef0eef404d040dedf4555cc7fe335de6f
Signed-off-by: Cai YiWei <cyw@rock-chips.com>
net/rfkill/rfkill-wlan.c:697:22: error: redefinition of 'wlan_early_suspend' as different kind of symbol
Signed-off-by: Finley Xiao <finley.xiao@rock-chips.com>
Change-Id: Id439523b64fa9fc99b5208c0c2a811e157fd5a9c
Vdpu383 doesn't reset the register when it is enabled.
In order to avoid exceptions, it is necessary to
configure the initial value when it is enabled.
In addition, ip_en involves cru mode, which is related
to the IP work frequency. It is necessary to ensure
that it is configured correctly.
Signed-off-by: Hongjin Li <vic.hong@rock-chips.com>
Change-Id: I7047faababe1747547d18cb51e1e3b527e2c8d35
Before:
default y if CPU_XXXX
After:
depends on CPU_XXX
default y
When a CPU_XXXX config is not selected, the config will be
automatically deselected.
Signed-off-by: Tao Huang <huangtao@rock-chips.com>
Change-Id: I95bbc481b6747d82637167b0f2b057732eb7112e
Before:
default y if CPU_XXXX
After:
depends on CPU_XXX
default y
When a CPU_XXXX config is not selected, the config will be
automatically deselected.
Signed-off-by: Tao Huang <huangtao@rock-chips.com>
Change-Id: Iff7361f6515e1fda72a4993a514ad948876e8850
Before:
default y if CPU_XXXX
After:
depends on CPU_XXX
default y
When a CPU_XXXX config is not selected, the config will be
automatically deselected.
Signed-off-by: Tao Huang <huangtao@rock-chips.com>
Change-Id: I380b2158def41949086ceb49133e5f905c4e17e6
Before:
default y if CPU_XXXX
After:
depends on CPU_XXX
default y
When a CPU_XXXX config is not selected, the config will be
automatically deselected.
Signed-off-by: Tao Huang <huangtao@rock-chips.com>
Change-Id: If10a37e81221ddd69a32e528c2642d8b0065b309
Before:
default y if CPU_XXXX
After:
depends on CPU_XXX
default y
When a CPU_XXXX config is not selected, the config will be
automatically deselected.
Signed-off-by: Tao Huang <huangtao@rock-chips.com>
Change-Id: I113d92a4ccaed1e93e79b8c69d8595f4354be496
Restore link if controller or device is powered down in runtime PM
or system PM.
Signed-off-by: Shawn Lin <shawn.lin@rock-chips.com>
Change-Id: Iec19935386fa532e537932ac5897de438371016e
Increase vepu's default frequency to 702M to meet the encoding
performance requirements for single-core 4k30.
Change-Id: I306f9d16e36b692b61c3aeae3d1c297923fd5e48
Signed-off-by: Yanjun Liao <yanjun.liao@rock-chips.com>
1. Add reboot frequency for opp table.
2. Add intermediate threshold frequency for opp table.
3. Add suspend opp for cpu opp table.
Signed-off-by: Finley Xiao <finley.xiao@rock-chips.com>
Change-Id: I8863074713431f566336a70199f9b9e79ca1e7e3
Tips:
Set task_capacity > 1 in rk3576.dtsi, and then run link mode.
Change-Id: I1726226c3a67becd605ceca2eedcbb049dcea891
Signed-off-by: Ding Wei <leo.ding@rock-chips.com>
In vepu_510 the sli_done interrupt is triggered by slice_fifo not empty
status.Therefore when the sli_done_sta interrupt is cleared without
reading all the slice_len data in slice_fifo an extra interrupt will
be triggered. So it is better to clear the interrupt after reading all
slice_len to avoid false irq reporting. On the other hand, vepu_580 is
triggered only after writing a slice, without checking iif fifo is
non-empty, so there is no need to clear the interrupt again after reading the slice
Change-Id: If20a097b0e9fb41df9984c0ed316d717ba783ac4
Signed-off-by: Yanjun Liao <yanjun.liao@rock-chips.com>
If scaling is done vertically using bilinear interpolation, the input
resolution is forced to switch to average interpolation when it is
greater than 4096.
Signed-off-by: Yu Qiaowei <cerf.yu@rock-chips.com>
Change-Id: I66d2ecb76386d3f6378a241f7157af89f1e1542d
The initial speculation error may be related to inputs larger than 4K
and scaled down by more than 8 times. The current confirmation is that
the error is introduced due to division loss. To avoid this issue, it is
recommended to add rounding to the calculations.
Signed-off-by: Yu Qiaowei <cerf.yu@rock-chips.com>
Change-Id: Ib2c4cd2e2fa9f002f65116c7491df60bb43c5e87
Implementing dp mst mode in uboot need much time and is difficult,
So The dp show uboot logo stll in sst mode though the branch or
sink support MST when attach to RK3576 DP Port. If some methods
foud that easy to show logo in MST mode, MST mode will be support
when show logo.
In order to show kernel logo only in SST mode. The DP controller
driver should force the DPTX controller work in SST mode whether the
sink is mst-capable or not until finish show logo.
Change-Id: I8feef5b3feb6f98d249b470cbe4b3363ba218733
Signed-off-by: Zhang Yubing <yubing.zhang@rock-chips.com>
