DSC registers can only be accessed after DSC_PD
power on.
We don't want to power on PD at vop_initial.
We will enable PD when a corresponding module
is enabled.
And enable all PD at vop_inital make it more
complicated for the nest pd(PD_CLUSTER0/1/2/3)
Signed-off-by: Andy Yan <andy.yan@rock-chips.com>
Change-Id: I362ace6837b24a0ebed5b8486c4ba46680d0e693
HDMI on rk3588 have a inverted V/HSYNC polarity than
other platform.
Signed-off-by: Andy Yan <andy.yan@rock-chips.com>
Change-Id: I84fc369c211a6f8715c77421c0938fe05516fca6
This is the Linux device driver released for RealTek RTL8168B/8111B,
RTL8168C/8111C, RTL8168CP/8111CP, RTL8168D/8111D, RTL8168DP/8111DP,
and RTL8168E/8111E Gigabit Ethernet controllers with PCI-Express interface.
Signed-off-by: Alex Zhao <zzc@rock-chips.com>
Change-Id: I54634ade9602706d1230bb2551f1da7157943814
1.version: 101.10.361.11 (wlan=r892223-20210630-1)
2.both wifi5 and wifi6 are supported
Signed-off-by: Alex Zhao <zzc@rock-chips.com>
Change-Id: Ia0724ebc628ba40afed947275d34ff5c47a410b4
of_iomap allowed to map the same address repeatedly.
Signed-off-by: Elaine Zhang <zhangqing@rock-chips.com>
Change-Id: I670e2f3ed564c159eed825bc388f4a9ae3a65f76
Reorder system heap pages by bit[14:12] of pages' physical address, it
benefit for dram do access in different banks once time.
Signed-off-by: Simon Xue <xxm@rock-chips.com>
Signed-off-by: Jianqun Xu <jay.xu@rock-chips.com>
Change-Id: I686c9e54f456d3b7f373ab1b0586125e70f891ec
Two axi bus:
AXI0 is a read/write bus with a higher performance.
AXI1 is a read only bus.
Every window on a AXI bus must assigned two unique
read id(yrgb_id/uv_id, valid id are 0x1~0xe).
Signed-off-by: Andy Yan <andy.yan@rock-chips.com>
Change-Id: I867df219797da33f89fec6fba639bcdf55cb54b3
Support the system_heap to allow cpu access partial dma-buf.
Change-Id: I8250c0bb26b776b8c8f5e4c3ee0cb71e26445743
Signed-off-by: Jianqun Xu <jay.xu@rock-chips.com>
Add DMA_BUF_IOCTL_SYNC_PARTIAL support for user to sync dma-buf with
offset and len.
Change-Id: I03d2d2e10e48d32aa83c31abade57e0931e1be49
Signed-off-by: Jianqun Xu <jay.xu@rock-chips.com>
Bt command think if EL0_SP is less than 0xffffffcxxxxxxxxx
it is user mode, but EL0_SP may be 0xffffff8xxxxxxxxx.
According to ARM-V8, the virtual address bit63 determine
TTBR0 OR TTBR1. So if EL0_SP is less than 0x8000000000000000,
it is user mode.
Signed-off-by: Huibin Hong <huibin.hong@rock-chips.com>
Change-Id: Ib97b405df6e669e3806161c97801847e2f5d247a
The controller must route to the comboPHY when it works.
pcie1l0_sel
Select the signal form PHY to PCIe1l0
1'b0: Select comb PHY
1'b1: Select PCIE3 PHY
Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
Change-Id: I5e7faf71fdd22958c757f884f75ec9a00aeb2fb9
Add dts decode to support the pcie2x1l0 and pcie2x1l1 setting, which is
in PHP_GRF_PCIESEL_CON.
pcie1l0_sel
Select the signal form PHY to PCIe1l0
1'b0: Select comb PHY
1'b1: Select PCIE3 PHY
Usage in dts:
rockchip,pcie1ln-sel-bits = <0x100 0 0 0>;
Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
Change-Id: I5fb177f37b23c5f3cdaadf8c103f8e6487ea6a76
Currently, the datasheet and pcb design has removed all the
pin {bclk, lrck}_rx, and use the pin {bclk, lrck}_tx only
to simpilify design.
- Remove pin {bclk, lrck}_rx
- Rename pin {bclk, lrck}_tx to [bclk, lrck]
So, we do the same thing by default.
Signed-off-by: Sugar Zhang <sugar.zhang@rock-chips.com>
Change-Id: Ide90500b766fa39d6f032b0edf309e001939b579
Currently, the datasheet and pcb design has removed all the
pin {bclk, lrck}_rx, and use the pin {bclk, lrck}_tx only
to simpilify design.
- Remove pin {bclk, lrck}_rx
- Rename pin {bclk, lrck}_tx to [bclk, lrck]
So, we do the same thing by default.
Signed-off-by: Sugar Zhang <sugar.zhang@rock-chips.com>
Change-Id: Ief06364337ccd6b7f2bc61ffd4aeb8d6e168a8a4
Enable the ELAN touch panel used on Rockchip RK3588s tablet.
Signed-off-by: Tao Huang <huangtao@rock-chips.com>
Change-Id: Ia93230ac356752600ea98182cc0b26ae4320c094
drivers/input/touchscreen/elan/elan_update.c:40:22: error: incomplete definition of type 'struct i2c_client'
Fixes: 7f61b3481d ("input: touchscreen: support ELAN TP_5515")
Signed-off-by: Tao Huang <huangtao@rock-chips.com>
Change-Id: I9b5aa8c8fc5d6ee2082938dc74719a2db9041f9d
Enable this to support RK3588 GPU.
But RK3568 GPU should disable this config.
Signed-off-by: Zhixiong Lin <zhixiong.lin@rock-chips.com>
Signed-off-by: Zhen Chen <chenzhen@rock-chips.com>
Change-Id: I78c165329c9cbc8565af26494c6034dcc704ad66
Enable the ELAN touch panel used on Rockchip RK3588s tablet.
Signed-off-by: Jianhui Wang <wjh@rock-chips.com>
Change-Id: I4a5f116cd8bfd9e6cb232af9f4eabe9289978372
