PD#161202: recycles the vf data before must to be checked.
Change-Id: Ief413c5169d859be632f4799d6897ae1322e2fbb
Signed-off-by: Nanxin Qin <nanxin.qin@amlogic.com>
PD#161757: improvers the regs ops to prevent crash duo to bus type err
Change-Id: Id5f7648de84d55700d7c240b32e988363ffb9ef7
Signed-off-by: Nanxin Qin <nanxin.qin@amlogic.com>
PD#156734: move g12a common parts from dts to dtsi
Change-Id: I67476217b44774c1645da5482d8c7e43ac91ae7e
Signed-off-by: jianxin.pan <jianxin.pan@amlogic.com>
PD#156734: audio: auge: add alsaPORT suffix name for android audio hal
Change-Id: Ie442dc27c594caf0181425e66fe555c1bd5355ba
Signed-off-by: Xing Wang <xing.wang@amlogic.com>
PD#156734: vpp: disable pps as default when scaler ratio is 1:1
Change-Id: I5ff2a9a1089461c92996066e0cec4379a5d509e4
Signed-off-by: Brian Zhu <brian.zhu@amlogic.com>
PD#161570: di: fix black screen in hdmi 1080p mode
1) fix r321 black screen in hdmi 1080p mode
2) add debug info for recovery mode
3) move pre hold ratio configuration into pecial function
Change-Id: I6e482505da6f3621a1934f600cedcec4341e0743
Signed-off-by: kele bai <kele.bai@amlogic.com>
PD#161621: gpio: core: Decouple open drain/source flag with active low/high
Currently, the GPIO interface is said to Open Drain if it is Single
Ended and active LOW. Similarly, it is said as Open Source if it is
Single Ended and active HIGH.
The active HIGH/LOW is used in the interface for setting the pin
state to HIGH or LOW when enabling/disabling the interface.
In Open Drain interface, pin is set to HIGH by putting pin in
high impedance and LOW by driving to the LOW.
In Open Source interface, pin is set to HIGH by driving pin to
HIGH and set to LOW by putting pin in high impedance.
With above, the Open Drain/Source is unrelated to the active LOW/HIGH
in interface. There is interface where the enable/disable of interface
is ether active LOW or HIGH but it is Open Drain type.
Hence decouple the Open Drain with Single Ended + Active LOW and
Open Source with Single Ended + Active HIGH.
Adding different flag for the Open Drain/Open Source which is valid
only when Single ended flag is enabled.
Note: the patch from v4.14-rc6 with original commit ID 4c0facddb
Change-Id: I2f652614d3783caee3f510dc70e5e185379f49a7
Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
PD#159810: mtd: change the block number of RSV member into macro
in case of customer want change the RSV part size, we'd better
make the block number of every part be a macro, in case miss modified
in somewhere.
Change-Id: I75e665cc3efd8b4bf4ad5a0843f855d4915ae180
Signed-off-by: Yi Zeng <yi.zeng@amlogic.com>
PD#156734: gpu: set up gpu max freq to 850MHz
Change-Id: I96d9c9beddd4c5e723fe4c4790c7ce99aeebc1e6
Signed-off-by: binqi.zhang <binqi.zhang@amlogic.com>
PD#158989: mtd: add a new slc nand and avoid the 2nd column in some command
new slc nand: F59L1G81MB (2M)(same id with F59L1G81MA (2Y),
called a joint name of F59L1G81Mxxx).
We do not send the 2nd column in some command such as: read id,
read parameter etc
Change-Id: Ibeac872231c880efde8a38e6344c326043e7d7dc
Signed-off-by: Yi Zeng <yi.zeng@amlogic.com>
PD#156734: cpufreq: fix cpufreq system halt for reboot.
Change-Id: I5c12a58b2fa53ef4c22a7032572983bf566b19b7
Signed-off-by: Hong Guo <hong.guo@amlogic.com>
PD#161257: fix g12a pll enable ops mutex in in_atomic
Also fix mpll setting range
Change-Id: I0a3acfbfd111d48f3b31c8f068294c1714ad2886
Signed-off-by: Qiufang Dai <qiufang.dai@amlogic.com>
PD#156734: di: fix post write crash for pps enabled in post
1) diable post wirte in post write done irq to avoid
pps send data to fifo
Change-Id: I758be72a2fb2c17b731a7575f24a75bc44c5e816
Signed-off-by: kele bai <kele.bai@amlogic.com>
PD#161104: adds the register ops for media codec io efuse bus
Change-Id: I6fc625848442754b089428fd8cb10a3047fa4062
Signed-off-by: Nanxin Qin <nanxin.qin@amlogic.com>
PD#160530: porting hard lockup without nmi support
Emulate NMIs on systems where they are not available by using timer
interrupts on other cpus. Each cpu will use its softlockup hrtimer
to check that the next cpu is processing hrtimer interrupts by
verifying that a counter is increasing.
This patch is useful on systems where the hardlockup detector is not
available due to a lack of NMIs, for example most ARM SoCs.
Without this patch any cpu stuck with interrupts disabled can
cause a hardware watchdog reset with no debugging information,
but with this patch the kernel can detect the lockup and panic,
which can result in useful debugging info.
Change-Id: I720032cbec78c79d8b4accacc01f183c70e5d403
Signed-off-by: Colin Cross <ccross@android.com>
Signed-off-by: Jiamin Ma <jiamin.ma@amlogic.com>
PD#156734: optimise the clock divider of VID_PLL_DIV
This is a bridge of analog signal and digital signal module.
With VCO output 4.455Gbps/2160p60hzY420 12bits mode and the
ENCP needs 594MHz, there should divide half to reduce the
risk of HHI_VID_PLL_CLK_DIV.
Change-Id: If6965d64df1aa4b7cb4a8dd66847db3d5d17aea7
Signed-off-by: Zongdong Jiao <zongdong.jiao@amlogic.com>
PD#156734: lcd: support two clk_path for g12a
clk_path=0, use hpll, default setting;
clk_path=1, use gp0_pll.
clk_path is configured in dts, and can be changed by sysfs node:
echo path <n> >/sys/class/lcd/clk
Change-Id: I30d29ca8eefb2b3e8f4f7f37e4e0e639b23c06bb
Signed-off-by: Evoke Zhang <evoke.zhang@amlogic.com>
PD#158433: arm64: dts: add i2c alias in aliases node
add alias for i2c controller to fasten i2c dev id
Change-Id: I87c1999766c69e9df63f551f0559b8028844d660
Signed-off-by: Jian Hu <jian.hu@amlogic.com>
PD# 156734 PD# 160873
1, add efuse user space key-name list, then can user key-name rd/wr efuse.
Change-Id: I5feee2e59cefb96fae907403509a86a631e57342
Signed-off-by: Sam Wu <yihui.wu@amlogic.com>
PD#156734: di: turn on cont wr interrupt, fine tune cue
1) turn on cont wr int, disable me int
2) modify cue mode for abnormal mode 2/4/7/8/9
3) move clk adjustment into thread env
4) set min clk rate when di disable
5) modify txlx clk tree
Change-Id: I759324806bb9c9bfa4e83ee4a39e5283c5653f3b
Signed-off-by: kele bai <kele.bai@amlogic.com>
PD#156734: amvecm: optimize G12A hdr code
1. put all the mtx/lut parameters together
Change-Id: I902c362fe8d8b01f2793789e9150640e929e1e73
Signed-off-by: MingLiang Dong <mingliang.dong@amlogic.com>
PD#156734: ge2d: fix the vapb div and ge2d gate error
Change-Id: Ib0e8c0328d0c136d7a0b50b0bba13cd95b3070f7
Signed-off-by: Brian Zhu <brian.zhu@amlogic.com>
PD#159608: mm: optimize for CMA allocate time
1. Make all amlogic-changed mm code configuarable, which are
wrapped by CONFIG_AMLOGIC_CMA/CONFIG_AMLOGIC_MEMORY_EXTEND
2. Implement some core code of CMA to a single file:
drivers/amlogic/memory_ext/aml_cma.c
3. detailed imporove steps:
a) use NOOP as default IO-scheduler for nand based storage.
which can avoid long time wait for page lock found in
CFQ scheduler;
b) use per-cpu thread to allocate CMA concurrent when driver
request large amount CMA memory; these threads have high
user nice value to reduce schedule delay;
c) increase task user nice of mmc queue and kswapd.
d) wake up kswapd if page are hold by kswap shrink list and
cma isolated test failed.
e) Fobidden low user nice task use CMA, which can avoid priority
inversion problem.
f) optimize for LRU usage, devide each type of LRU to 2 parts,
normal pages are linked after LRU head, CMA pages are linked
after cma_list.
g) avoid compaction case move cma forbidden pages to cma area.
h) Increase strength of lowmemory killer.
4. Improve read speed of /proc/pagetrace, a filter can be set to
reduce message which not print functions allocate memory less
than filter value:
echo filter=xxx > /proc/pagetrace
Change-Id: Ie79288b7947aa642e4f7eacc25565559a73660df
Signed-off-by: tao zeng <tao.zeng@amlogic.com>
PD#156734: sound: minor fix make array data ready only, short delay
Change-Id: I12d2de5d52c5774bdf56b9358fb9213c8c77fafa
Signed-off-by: Xing Wang <xing.wang@amlogic.com>
PD#156734: sr: only disable sr for g12a default
Change-Id: I32b7f8be08adaebb2557eab4ed1ad39c084f36d6
Signed-off-by: Dezhi Kong <dezhi.kong@amlogic.com>
