We need to put the power status of HEVC IP into IDLE unless
we can't reset that IP or the SoC would crash down.
rockchip_pmu_idle_request(dev, true)---> enter idle
rockchip_pmu_idle_request(dev, false)---> exit idle
Change-Id: I76733efd2de4f7ee183c1b6bd1545d60038ee31b
Signed-off-by: Caesar Wang <wxt@rock-chips.com>
Signed-off-by: Jeffy Chen <jeffy.chen@rock-chips.com>
Signed-off-by: Randy Li <randy.li@rock-chips.com>
Signed-off-by: Elaine Zhang <zhangqing@rock-chips.com>
There is a lower power dissipation requirement for some products, like
battery ipc, bell, etc... We have to gate cpll/hpll to reduce power
dissipation.
Signed-off-by: Elaine Zhang <zhangqing@rock-chips.com>
Signed-off-by: Ziyuan Xu <xzy.xu@rock-chips.com>
Change-Id: I48fae621c980b6f7f7d8e8ca71171febd6c6a9a8
Signed-off-by: Elaine Zhang <zhangqing@rock-chips.com>
set pll sequence:
->set pll to slow mode or other plls
->set pll down
->set pll params
->set pll up
->wait pll lock status
->set pll to normal mode
To slove the system error:
rockchip_rk3399_wait_pll_lock: timeout waiting for pll to lock
rockchip_rk3399_pll_set_params: pll update unsucessful,
trying to restore old params
Change-Id: I62aecd9f292de5a3c7bcd8a87231785bf115159d
Signed-off-by: Elaine Zhang <zhangqing@rock-chips.com>
If setting freq is not support in rockchip_pll_rate_table rk3399_pll_rates[],
It can set pll params by auto.
Change-Id: I5016cece64dca4c2efec18d552ee6be426f6b95a
Signed-off-by: Elaine Zhang <zhangqing@rock-chips.com>
Add cru regs dump when system panic.
It's just for debug.
Change-Id: I3aeeeb7f7b9240c917c18bc2d36b082003dc6370
Signed-off-by: Elaine Zhang <zhangqing@rock-chips.com>
Rockchip socs often have some tiny number of muxes not controlled from
the core clock controller but through bits set in the pmugrf.
Use MUXPMUGRF() to cover this special clock-type.
Change-Id: Iac962a27a3c88ce188d03c416cb4b3b45a462c0a
Signed-off-by: Elaine Zhang <zhangqing@rock-chips.com>
There is a new clock branch have a form like
|--\
Change-Id: I6a7c17cb782b13965f537f44c103611e00d1ecad
---[GPLL]---| \ |--\
---[CPLL]---|mux|-----[GATE]--[DVI]------| \
---[HPLL]---| / | |mux|--[GATE]--
|--/ |--[GATE]--[HALFDVI]--| /
|--/
This patch registers two composite clocks for this branch type,
and make them become brother clock for each oher.
Change-Id: I46aeab26e478f341600114014db1c7d58e234f11
Signed-off-by: Finley Xiao <finley.xiao@rock-chips.com>
Signed-off-by: Elaine Zhang <zhangqing@rock-chips.com>
Some composite clocks may have the same parent clock, if one clock change
the parent clock rate, the other clock rate may too large, so add a
brother clock in composite that the other clock also can be changed when
parent rate is changed.
Change-Id: I2c6749e578b76d6780cecdcd9ff1b5fd4f25a0ba
Signed-off-by: Finley Xiao <finley.xiao@rock-chips.com>
Signed-off-by: Elaine Zhang <zhangqing@rock-chips.com>
The CLK_SET_RATE_PARENT flag make the parent clock and the child clk is 1:1.
If the DCLK frequency is too low, the PLL frequency will be very
low, which will affect the output waveform quality of PLL, and PLL
locking may be abnormal, so add a new COMPOSITE_DCLK clock-type to handle
that.
Change-Id: If9bee9ebf157fcf034aed246b3aa1cff503ef9cf
Signed-off-by: Elaine Zhang <zhangqing@rock-chips.com>
We know that under the condition of even frequency division,
if the numeratoris greater than 4, the duty cycle may not be
equal to 50%.
In the case, weneed to keep the original numerator(<4) and
denominator.
Change-Id: I8cd08199df4e3d27d5697ce80370224a6f267e26
Signed-off-by: Xing Zheng <zhengxing@rock-chips.com>
Signed-off-by: Elaine Zhang <zhangqing@rock-chips.com>
From Rockchips fractional divider usage, some clocks can be generated
by fractional divider, but the input clock frequency of fractional
divider should be less than a specified value.
Change-Id: Ifd6c5f6a24a64021f990506e8657cd925f9b96f9
Signed-off-by: Finley Xiao <finley.xiao@rock-chips.com>
Signed-off-by: Elaine Zhang <zhangqing@rock-chips.com>
The bigger the divider, the better the clock jitter.
Change-Id: I4b4e06c71c2f0bdb0e32422fb42c8d490c3ec4bd
Signed-off-by: Finley Xiao <finley.xiao@rock-chips.com>
Signed-off-by: Elaine Zhang <zhangqing@rock-chips.com>
The div offset of some clocks are different from their mux offset
and the COMPOSITE clock-type require that div and mux offset are
the same, so add a new COMPOSITE_DIV_OFFSET clock-type to handle
that.
Change-Id: I1c97f7464c3c80ea6dbd7d4052565dd4e35c0931
Signed-off-by: Finley Xiao <finley.xiao@rock-chips.com>
Signed-off-by: Elaine Zhang <zhangqing@rock-chips.com>
A clock branch consisting of a mux with non-standard
select values.
The parent in Mux table is sorted by priority.
Change-Id: Ibcaa35541cf8bc255175a62c7950b2241aac2f55
Signed-off-by: Elaine Zhang <zhangqing@rock-chips.com>
With features AVB / dm-verity enabled, cmdline content is about to
exceed previous maximum 2048 bytes. printk can not support long line
exceed LOG_LINE_MAX which less than 1024. So loop printk until all
content are printed in init/main.c.
Change-Id: I4c40b5302d82122b93161fe30082f5abcfcad069
Signed-off-by: Tao Huang <huangtao@rock-chips.com>
dtc generation of symbols by CONFIG_DTC_SYMBOLS.
For support device tree overlay.
Change-Id: Ia10496031bc02fd3a4ff98ab0acfc6fc9a54951b
Signed-off-by: Tao Huang <huangtao@rock-chips.com>
-CONFIG_MEMCG_SWAP=y which default y
-CONFIG_SECCOMP=y which default y
-CONFIG_POWER_AVS=y which is removed upstream.
-CONFIG_ZBOOT_ROM_TEXT=0x0 which default 0x0
-CONFIG_ZBOOT_ROM_BSS=0x0 which default 0x0
reorder some configs.
Signed-off-by: Tao Huang <huangtao@rock-chips.com>
Change-Id: Ifc45b074751a9ef8d0e5390102fe6c4cc9d5bab2
-CONFIG_MEMCG_SWAP=y which default y
-CONFIG_SECCOMP=y which default y
-CONFIG_POWER_AVS=y which is removed upstream.
reorder some configs.
Signed-off-by: Tao Huang <huangtao@rock-chips.com>
Change-Id: I1b5651ce91a06f69a6cafb116ad2b67c1850a0a1
This reverts part of commit 251c226c35 ("rk: revert to v4.19").
To keep the changes of include/dt-bindings/soc/rockchip,boot-mode.h.
Change-Id: I4bcb721da1bea0600c92d4e23d33320bff8d0caf
Signed-off-by: Tao Huang <huangtao@rock-chips.com>
There is not need to build mach-rockchip when PSCI is enabled.
Save about 5K text, 7K data and fix compilation error for THUMB2_KERNEL.
Change-Id: Ieb17867592d7d49a8b983dc5c7e8d1d1df14d864
Signed-off-by: Tao Huang <huangtao@rock-chips.com>
The lz4 Legacy format(which specified by -l) is
not supported by U-Boot.
Change-Id: I6b94881117b59384daca4efd796c933e8dc9e5a6
Signed-off-by: Andy Yan <andy.yan@rock-chips.com>
Signed-off-by: Tao Huang <huangtao@rock-chips.com>
