PD#168480: iio: adc: meson: add sar adc support for txl
Change-Id: I9febffdb4fef582f5a91138491ae87d11ca240ee
Signed-off-by: Xingyu Chen <xingyu.chen@amlogic.com>
Signed-off-by: Bo Yang <bo.yang@amlogic.com>
PD#168480: iomap: txl: add iomap support for txl
Change-Id: Icbd5a8811950cd806cf2b6a4b08dca37402e52e7
Signed-off-by: Xingyu Chen <xingyu.chen@amlogic.com>
Signed-off-by: Bo Yang <bo.yang@amlogic.com>
PD#168480: pwm: meson: add support for txl
1、 add support for txl
2、 fix txl、txlx clock mux selection error issue
Change-Id: Iff7eeb16086604030414d4e350fd533a3d2328b1
Signed-off-by: bichao.zheng <bichao.zheng@amlogic.com>
Signed-off-by: Bo Yang <bo.yang@amlogic.com>
PD#168480: irqchip: meson: add gpio IRQ support for txl
Change-Id: I03b32a3ffe4a7e9b63631ac5e593bcbf346b8765
Signed-off-by: Xingyu Chen <xingyu.chen@amlogic.com>
Signed-off-by: Bo Yang <bo.yang@amlogic.com>
PD#168480: i2c: meson: add support for txl
Change-Id: I0c4fe9d2e6caec0cfa812af28476774db69a4e89
Signed-off-by: Jian Hu <jian.hu@amlogic.com>
Signed-off-by: Bo Yang <bo.yang@amlogic.com>
PD#168480: pinctrl: txl: add pinctrl & gpio support for txl
Change-Id: I2496cdebfc283e90825f5dd7d20b0e16f57158d2
Signed-off-by: Xingyu Chen <xingyu.chen@amlogic.com>
Signed-off-by: Bo Yang <bo.yang@amlogic.com>
PD#168480: clk: txl: initial add clock driver
remove CLK_SET_RATE_PARENT flag for spicc.
If add CLK_SET_RATE_PARENT, it will change clk81 rate when set
spicc clock rate.
Change-Id: I80fec2c6d10611994ff40b06307e39b51ddb5a1a
Signed-off-by: Jian Hu <jian.hu@amlogic.com>
Signed-off-by: Bo Yang <bo.yang@amlogic.com>
PD#168231: block: loop: enable loop partiton scanning
If max_part is given, partition scanning is globally
enabled for loop devices.
Change-Id: I7a8ca59eff85cf9ee97264c3d8ae8dceb198cf32
Signed-off-by: Ao Xu <ao.xu@amlogic.com>
PD#170048: mtd: add new ATO slc nand support
add a ATO slc nand: AFND2G08U3A
Change-Id: I0263682231008c862c9f3f77d02ef7512de3a46f
Signed-off-by: Yi Zeng <yi.zeng@amlogic.com>
PD#169836: fix wss issues
wss detect slowly
aspect ratio unstable when set off on machine
aspect ratio 4:3 different with screen mode 4:3
Change-Id: I66d0aa393808513975885b86ee18e4c62bf10c88
Signed-off-by: Nian Jing <nian.jing@amlogic.com>
PD#162113: improve ap62x8 rx tput
The reason why wifi TCP rx throughtput lower than kernel3.14 are as flollows:
On K3.14, RX has more time to work in ISR, but on K4.9, RX has more time to
work in kernel ksoftirqd thread, however, ksoftirqd has a very low priority.
On K4.9, a commit from upstream caused this difference, then revert it.
Revert "softirq: Let ksoftirqd do its job"
This reverts commit 4cd13c21b2.
Change-Id: I094232dad5dfddbcd94c35ec42a5e3302ed52459
Signed-off-by: libo <bo.li@amlogic.com>
PD#166937:
not return errors when not find config.
will crashed on:
[ 9.478046@0] task: ffffffc05aea8d80 task.stack: ffffffc05a498000
[ 9.484090@0] PC is at configs_config2str+0x2c/0x240
[ 9.489001@0] LR is at configs_get_node_path_str+0x78/0xd4
[ 9.494433@0] pc : [<ffffff800982f8cc>] lr : [<ffffff80098311c8>]
pstate: 20000145
[ 9.501935@0] sp : ffffffc05a49baf0
[ 9.505386@0] x29: ffffffc05a49baf0 x28: ffffffc05a498000
Change-Id: Ia5985d3e5aa7aefecb6867e3d2ab29efc7592b9b
Signed-off-by: Zhi Zhou <zhi.zhou@amlogic.com>
PD#164751: dts: change all txlx/axg/g12a/g12b dts to use spicc upstream driver.
1. change to use the unified name "spicc0/1".
2. change axg compatible from "amlogic, spicc" to "amlogic,meson-axg-spicc"
to use upstream driver.
3. change txlx compatible from "amlogic, spicc" to "amlogic,meson-txlx-spicc"
to use upstream driver.
3. change g12a compatible from "amlogic, spicc" to "amlogic,meson-g12a-spicc"
to use upstream driver.
4. add node of "amlogic,meson-g12b-spicc" for g12b to use upstream driver.
Change-Id: I587127361fa2ada48332cc01857f2200709d597e
Signed-off-by: Sunny Luo <sunny.luo@amlogic.com>
PD#166884: optimize sd inval irq error,
when sd insert wifi running. wifi is data1.
Change-Id: I6de4f519d3bacec7d9ab4eec4fc9b0cfc6b5d07d
Signed-off-by: Nan Li <nan.li@amlogic.com>
PD#169687: pwm: meson: don't disable pwm when setting duty repeatedly
There is an abnormally low about 20ms,when setting duty repeatedly.
Because setting the duty will disable pwm and then enable.Delete
this operation now.
Change-Id: I4bca5e61b4782da3160c14d8c73cd913d7e21db3
Signed-off-by: bichao.zheng <bichao.zheng@amlogic.com>
PD#169639: hdmitx: fix a map size error when g12b return to trunk
Change-Id: If26755418cbed435533f8547f30859165b7518b2
Signed-off-by: Yi Zhou <yi.zhou@amlogic.com>
PD#168682: cec: modify the line check for g12a
Change-Id: Iad4b47e236f16313356dc9d719052c382311a913
Signed-off-by: hongmin hua <hongmin.hua@amlogic.com>
PD#168551: need to use unifykey to read/write efuse key
1.fix efuse config name to CONFIG_AMLOGIC_EFUSE
2.add correct efuse key read funciton
Change-Id: I415f1b68d5de090220b1bd96db299452af176626
Signed-off-by: Zhongfu Luo <zhongfu.luo@amlogic.com>
PD#164751: spicc: add dma and enhance features of axg/txhd/g12a/g12b.
1. fix TESTREG bits defination error;
2. fix cs-gpio error in slave setup;
3. reset fifo to avoid successive fifo error before tansfer;
4. add enhance feature of cs-preload delay control;
5. add auto io delay control;
6. add enhance feature of tt/ti delay control;
7. fix clk error which occurred certainly when sencond spicc added;
8. surpport both auto core clk and fixed core clk rate setting:
set dts "fixed_core_rate = <200000000(example)>" to use fixed
core rate. otherwise, to use auto core clk.
9. support loop-back mode;
10. support DMA transfer;
11. must delete 1000M from parent clk.
12. It will be wrong when enhance divider=2. we have to add a flag
CLK_DIVIDER_PROHIBIT_ZERO to shield against it.
Change-Id: I820a52e6d31d3fe2e3615a0f4c5a07c17d11914d
Signed-off-by: Sunny Luo <sunny.luo@amlogic.com>
PD# 169693
add region_code key to change wifi local
Change-Id: I60b52e82b69128a90fbd9f72f0de8b46ccd04e7e
Signed-off-by: Ting Wang <ting.wang@amlogic.com>
PD#169940: hdmirx: hdcp1.4 force OESS mode
Force OESS mode to fix Google Chromecast box
flashing black screen issue.
Change-Id: I1768f7b69ac1379166d88f605a4dcfab7a7044ea
Signed-off-by: yicheng shen <yicheng.shen@amlogic.com>
PD#169024: update g12b thermal ipa mode data for match power
Change-Id: Iedcb16cc9da2a47777456e041831ff60f0229c5a
Signed-off-by: Huan Biao <huan.biao@amlogic.com>
PD#168568: G12A need to support EFUSE burning
1.add child node amlogic_set in efuse
2.node amlogic_set support EFUSE pattern burning
Change-Id: Ie20a8b61678e351cf32418879d4b40228e1d365f
Signed-off-by: Zhongfu Luo <zhongfu.luo@amlogic.com>
PD#161475: ddr: fix overflow when ddr freq is high
Caculate of ddr freq will overflow if ddr freq is
over 1.5GHz, This commit fixed it.
Change-Id: Idc07b1022b52e3ec5c227c15afff1aaf21575ed7
Signed-off-by: tao zeng <tao.zeng@amlogic.com>
PD#165213:
This change can use some amlogic optimize on arm32
Change-Id: Ic364baab21431e83d9b224d0d6c58913404aed3c
Signed-off-by: tao zeng <tao.zeng@amlogic.com>
PD#168568: G12A need to support EFUSE burning
Change-Id: If85af608a03450ca5fc8557ea7d2c2c5f71fff09
Signed-off-by: Zhongfu Luo <zhongfu.luo@amlogic.com>
PD#169865: arm64: dts: g12a/g12b: correct i2c timeout interrupt number
I2c timeout interrupt number has changed since g12a SoC, the timeout
interrupt have not used in i2c controller driver, the function will
probably be added later.
Change-Id: I2aca009bacfda0bc2636e48032de71c9aa42cacb
Signed-off-by: Jian Hu <jian.hu@amlogic.com>
PD#169594: hdmitx: update extcon_hdmi_audio after resume
Under some corner case, extcon_hdmi_audio maybe as 0.
Change-Id: I497b5f8538ffd329e1fee4fcc44c09944e77cf64
Signed-off-by: Zongdong Jiao <zongdong.jiao@amlogic.com>
