PD#158592: di: add dummy buffer for first field
1) only middle buffer can be process in di
Change-Id: Ide92f1a17428cf5c27468a6dfc086ad2f4685fe3
Signed-off-by: kele bai <kele.bai@amlogic.com>
PD#158950: fixed the issure of crash when get pts rec num.
Change-Id: Iadba80bd5c0c1c4dc001e0321ed0e1a460c57ced
Signed-off-by: Nanxin Qin <nanxin.qin@amlogic.com>
PD#158474: fixed exported fd leaked.
Exported fd didnot bind correct release function,
use core gem-prime function to re-write export function.
The import function is not provded, for now we only import
the buffer created from meson driver.
Change-Id: I15fad65741631ee2b367d088e733f20af8b0cf5a
Signed-off-by: sky zhou <sky.zhou@amlogic.com>
PD#152825: Revert "drm: force ARGB8888 format to osd display"
This reverts commit 63a6fdd4fa.
Change-Id: Icc99d5ec3bcbf6e879bedf9385b4b56be679741b
Signed-off-by: Yalong Liu <yalong.liu@amlogic.com>
PD#157314: di: add protection for no mirror function
1) disable mirror function, set keep frame to 0 avoid post process
buffer
2) modify for keep function, avoid crash caused by calling de post
in blankout mode
3) move mutex operation out of tasklet
4) remove framereset in hw disable function
Change-Id: I6166a855a7fe6ad38a21c570e9ad0a6f9a204424
Signed-off-by: kele bai <kele.bai@amlogic.com>
PD#157881: disabled a debug msg info.
this msg is not a bug.
Change-Id: I043c57955646bcff92ee2dd9dbe41b8485e7c136
Signed-off-by: Zhi Zhou <zhi.zhou@amlogic.com>
PD#154836: di: move enable pre mif before frame reset avoid timeout
1) enable pre mif before&after frame reset for
mc mif will be clear by pre frame reset
Change-Id: Ied15c337c4b28a62a873bd36361357b8fecdaf32
Signed-off-by: Bencheng Jing <bencheng.jing@amlogic.com>
PD#156898: add the polling method of sd card_detect,
because gpio irq remove raising & falling trigger method.
Change-Id: If270d27619d2686e74fe5e6d02748242faec4ce8
Signed-off-by: Nan Li <nan.li@amlogic.com>
PD#157965: pinctrl: define the pinmux with the same format.
there are two different pin controllers in Meson Soc Series, one of
them uses continuous 4-bit register to select function for each pin
(Eg: AXG and next), the other use indefinite bits that maybe from
different registers (Eg: Before AXG and GXLX)
previously, the driver use two different format to define the pinmux,
as follows:
[1] Before AXG and GXLX:
mux {
groups = "uart_ao_tx_a", "uart_ao_rx_a";
function = "uart_ao_a";
}
[2] AXG and next
mux {
pins = "GPIOAO_0", "GPIOAO_1";
function = "uart_ao_a";
}
which is a little confusing，and in this patch define the pinmux with
one format[1].
Change-Id: I04fb256294e1b664224c50a1baa622eb3a50b1c1
Signed-off-by: Xingyu Chen <xingyu.chen@amlogic.com>
PD#157965: pinctrl: separate soc drivers
When meson pinctrl is enabled, all meson platforms pinctrl drivers are
built in the kernel, with a significant amount of data.
This leads to situation where pinctrl drivers targeting an architecture
are also compiled and shipped on another one (ex: meson8 - ARM - compiled
and shipped on ARM64 builds). This is a waste of memory we can easily
avoid.
This change makes 3 pinctrl drivers (1 per SoC) out the original single
driver, allowing to compile and ship only the ones required.
porting from the upstream v4.15-rc2, commits as follows:
commit 277d14eb81
Change-Id: I68832eaf4a86233f89b8c32c44aaaab3593711d7
Signed-off-by: Xingyu Chen <xingyu.chen@amlogic.com>
PD#157965: pinctrl: get rid of unneeded domain structures
porting from the upstream v4.15-rc2, commits as follows:
commit db80f0e158
Change-Id: I7c65b6844159378b7ef766569cb373fb78997d51
Signed-off-by: Xingyu Chen <xingyu.chen@amlogic.com>
PD#151900: irqchip: replace the gpio IRQ driver with upstream v4.15-rc2
1) separate the driver from the pinctrl driver
2) add support for GPIOAO* of M8B as interrupt source
3) irq lines of GPIOAO* maximum up to eight
4) remove the GPIO IRQ Controller in AO domain
note that the driver does not support for detecting the double-edge signal
through the pin，if you have related needs, please consider using polling.
test pass on axg_skt, p212
Change-Id: Iaa8da8a0cbfa0fe90d26fc8c2b775e045c8768f2
Signed-off-by: Xingyu Chen <xingyu.chen@amlogic.com>
PD#157223: lcd_extern: add st7701 driver for CES
Change-Id: I49d6930c4a4358a8a97a73cbe0194a77f39f55e3
Signed-off-by: Weiming Liu <weiming.liu@amlogic.com>
PD#154260: lcd: add txlx support
Add panel dtsi for txlx r311.
Also add backlight local dimming driver.
Change-Id: I8d6cbc0a2099c17de1adc4087a3f58e1c34264ae
Signed-off-by: Weiming Liu <weiming.liu@amlogic.com>
PD#157417: mmext: fix panic caused by page trace
stackframe.graph is not init if CONFIG_FUNCTION_GRAPH_TRACER
is opened.
Change-Id: Iea270dadd4579e71a778d0da764c4da27323938e
Signed-off-by: tao zeng <tao.zeng@amlogic.com>
PD#154260: hdmitx: update hdmitx driver
1. using pr_info or pr_debug instead of printk.
2. remove unuse code.
3. change modulepara to sysfs.
4. use iomap api for read and write reg
Change-Id: I523329d7b26cd7c6675bdae55cda76a6a11c533e
Signed-off-by: Kaifu Hu <kaifu.hu@amlogic.com>
PD#154260: add cvbs driver support for txlx
Update dts for all platforms.
1. Remove get_cpu type api and support dts match table data.
2. Add clock tree support.
3. Add performance property in device node.
4. Add protection flag for clk_gate on/off.
Change-Id: I082e48ecbbb44cfec5deb31a3a73b67b31370798
Signed-off-by: Nian Jing <nian.jing@amlogic.com>
PD#154260: refine unifykey codes
1. delete calling of cpu version related apis
2. replace self-implemented list with kernel-implemented one
3. delete unused MACRO defination
4. replace global variables with private data structure
5. define pr_fmt in each module
6. fix code defects:
e438
e527
e550
e570
e650
7. add safe guard
Change-Id: I3dc93e3fef8ccfe3593d3275a69e0e21786e3ef1
Signed-off-by: Jiamin Ma <jiamin.ma@amlogic.com>
PD#154260: vpu: add vpu support for txlx
Update dts for all platforms.
1. add support for txlx
2. add clktree support for clk change
3. remove unused vpu module for mem_pd
4. remove vpu_parent "vid_pll","mpll1","mpll2"
Change-Id: I43aa2435305fd02664ae825bc2f62664ffb526be
Signed-off-by: Evoke Zhang <evoke.zhang@amlogic.com>
PD#154260: enable crypto driver
restructure crypto driver on top of dma and enable it on txlx
Change-Id: I0ffc0aaf9ad94c9652b9141bf92201c92463a893
Signed-off-by: Matthew Shyu <matthew.shyu@amlogic.com>
