PD#SWPL-17427
Problem:
when turn off dv vmode set to null, not vsync interrupt,
cause csc fail to monitor cap change
Solution:
csc add monitor for VOUT_EVENT_MODE_CHANGE
Verify:
Verify on u212
Change-Id: I072dcc75a62888abe403c574f2ecd8e796fa3e00
Signed-off-by: robin.zhu <robin.zhu@amlogic.com>
PD#SWPL-18116
Problem:
Under keeping frame case, dv toggle frame with wrong
mode, it may cause non-dv effect .
Solution:
Improve the toggle flow , pass the correct mode into
dv driver. Then using the last meta data
Verify:
Verified on u212
Change-Id: I456bb16e16810c166aba23d07a3296595032861e
Signed-off-by: Brian Zhu <brian.zhu@amlogic.com>
PD#SWPL-17476
Problem:
After kernel boots up, there will no edid info for vinfo
Solution:
Need update edid attach after reading once
In kernel init, hdmitx / vout / edid with attach once time
Normal replug, plugin / edid / uevent / mode setting / attach
Also, init DRM_DB[0] data.
Verify:
G12/U212
Change-Id: I188f0972c882a17efcbc568ef7d0db861b9b6c0a
Signed-off-by: Zongdong Jiao <zongdong.jiao@amlogic.com>
PD#SWPL-16484
Problem:
The DTVkit code is merged into the openlinux branch
Solution:
The DTVkit code is merged into the openlinux branch
Verify:
verify by newton
Change-Id: If7348733893f0518e68bd7d74593a78b510b88e2
Signed-off-by: zhiyuan.zhu <zhiyuan.zhu@amlogic.com>
PD#SWPL-16484
Problem:
The DTVkit code is merged into the November branch
Solution:
The DTVkit code is merged into the November branch
Verify:
verify by newton
Change-Id: If9b10321078083fc9dc402175c73bd2d79225029
Signed-off-by: zhiyuan.zhu <zhiyuan.zhu@amlogic.com>
PD#SWPL-11210
Problem:
stream mode set vpts in check in pts
Solution:
tunnel mode do not set first vpts for stream mode
Verify:
verify by u212
Change-Id: Ic369b83411051a819eb65ad5d1585e26e0342f3f
Signed-off-by: shuanglong.wang <shuanglong.wang@amlogic.com>
PD#OTT-5603
Problem:
Configurate GPIO_AO 9 as mclk_0,it doesn't work.
Solution:
From SM1, the mclk pad register is changed.
Using standard clk tree to make it compitable.
Verify:
TM2, SM1.
Change-Id: I8d53296297536c90768495232570f33fc89db131
Signed-off-by: Shuai Li <shuai.li@amlogic.com>
Signed-off-by: Luan Yuan <luan.yuan@amlogic.com>
Adding new kernel command line "enable_wol=<1|0>" will configure the WOL
features on next power off.
Change-Id: I4830aeb1651e90d4699887199000def1163fb6db
Signed-off-by: Dongjin Kim <tobetter@gmail.com>
(cherry picked from commit 22d698f4d2)
PD#SWPL-9350
Problem:
ppmgr does not support 10bit to cause a rotating screen.
Solution:
add vdin support 10bit.
Verify:
on U212
Change-Id: Idbe90f7e351edbc12e0e2d905f06e0cdd18da148
Signed-off-by: renjiang.han <renjiang.han@amlogic.com>
PD#TV-9856
Problem:
need change display driver for cool boot to enter
kernel stage freeze mode
Solution:
add lcd_panel_ctrl to control lcd display
Verify:
t962x2-x301
Change-Id: I8b58ab0a0f87c49791af7dddf7b05db37f7ad716
Signed-off-by: shaochan.liu <shaochan.liu@amlogic.com>
PD#SWPL-4097
Problem:
add lcd_ctrl bootargs for lcd driver control
Solution:
add lcd_ctrl bootargs for lcd driver advance control
and debug function in kernel
Verify:
verify by t962x2-r311
Change-Id: I4d741eef42505e259b54cd4f00e395d09edf7604
Signed-off-by: Shaochan Liu <shaochan.liu@amlogic.com>
PD#SWPL-10095
Problem:
command delay may too close to the command edge
Solution:
rescan cmd delay windows and find cmd delay value
after data alignment
Verify:
passed on g12b
Change-Id: I258e93aa87e35c843c45f62c58af3609bebe0901
Signed-off-by: Ruixuan Li <ruixuan.li@amlogic.com>
PD#TV-3042
Problem:
3D function did not support afbc format before
Solution:
Add the support case which format is afbc.
Verify:
x301
Change-Id: I38189bfa78eec6ac811fb81631514d7d7b8b3d62
Signed-off-by: Brian Zhu <brian.zhu@amlogic.com>
b8d9145 vpp: add interface to force non-afbc path [1/1]
c807fc4 vpp: tm2: add vd2 function for tm2 [2/2]
eea348a vpp: tm2: add vpp and sr support [1/2]
f08c28c video: Some interlace stream will stuck when pts rebound [1/1]
53b2624 amlvideo: reset video_inuse when amlvideo stop [1/1]
17cdaf3 amvideo: set black_threshold_height default 48 [1/1]
1cd025d vpp: set default aspect when the ratecontrol is zero [1/1]
58a2e8f vpp: Modify vframe epoll event [1/1]
94b0dc8 vpp: Modify vframe epoll event [1/1]
e98d6d3 video: enable pts calculation when hold video state changes [1/1]
43d30c4 vpp: add histgram test interface for vpp slt test [1/1]
2677784 amvecm: optimize amvecm update in vsync [1/1]
af78b0f vpp: increase the afbc burst len as 4 for txlx [1/1]
1ace6fc vpp: hold the vpp setting when meet the non-dw afbc frame [1/1]
e8a3758 vpp: 3d: disable crop when 3d playback or hdmi in [1/1]
4e6774d vpp: add black_threshold to disable video when window is too small[1/1]
3ae164f vpp: including crop info when AFBC switch to normal frame [1/1]
c67657f vpp: add the pic_mode backup to check difference [1/1]
33b1aee video: timming gets error when switching channels [1/1]
233779e vpp: add log switch in vpp_set_filters [1/1]
b00582b vpp: config the vd1 canvas1 correctly when 3D enabled [1/1]
607bc19 vpp: support 3D with afbc format [1/1]
vpp: config the vd1 canvas1 correctly when 3D enabled [1/1]
PD#TV-3086
Problem:
3D display abnormal. The vd1 canvas1 was incorrect.
Solution:
When enabled 3D function, config vd1 canvas1 correctly
Verify:
x301
Change-Id: I201cda2f33badf1af54ab4f177a17f761c7cea8d
Signed-off-by: Brian Zhu <brian.zhu@amlogic.com>
vpp: add log switch in vpp_set_filters [1/1]
PD#SWPL-5942
Problem:
Too many log when DI process called the vpp_set_filters with AFBC.
Solution:
Add log switch to disable it.
Verify:
verified on X301
Change-Id: I34c8573bed78e49d27ec386279e929e617bf76d5
Signed-off-by: Brian Zhu <brian.zhu@amlogic.com>
video: timming gets error when switching channels [1/1]
PD#TV-3062
Problem:
When switching channels, Hisense platform needs hold video,
and the timming obtained at this time is wrong
Solution:
because we have add hold video function, so get width and
height interface give the last video frame width and height,
and so on change the video
Verify:
X301
Change-Id: I331a4589dcb5f5785dce7eea6d8cd03c92d733d2
Signed-off-by: Xiaoming Sui <xiaoming.sui@amlogic.com>
vpp: add the pic_mode backup to check difference [1/1]
PD#TV-2929
Problem:
The pic_mode in cur_dispbuf was changed but not be detected.
Solution:
Add global pic_mode variable to check if the pic_mode in cur_dispbuf
is changed. If so, force vpp_set_filters.
Verify:
verified on x301
Change-Id: I5b95f512ad0823b031989f05526f114694887f2b
Signed-off-by: Brian Zhu <brian.zhu@amlogic.com>
vpp: including crop info when AFBC switch to normal frame [1/1]
PD#SWPL-6347
Problem:
When AFBC switch to normal frame, excluding the crop information, the pps
parameters are calculated with wrong input size.
Solution:
1.Add the crop information, when afbc swicth to normal frame.
2.check ratio of compress_width/width, sync to crop value
Verify:
verified on x301
Change-Id: Ib943f8a11263ce577952e589bc172d8b7bafd954
Signed-off-by: Brian Zhu <brian.zhu@amlogic.com>
Signed-off-by: Luan Yuan <luan.yuan@amlogic.com>
vpp: add black_threshold to disable video when window is too small [1/1]
PD#TV-3641
Problem:
Add new interface to disable video when window is too small
Solution:
Add the black_threshold interface to control the threshold size.
And set the default value is width=20, height=30.
Verify:
verified by x301
Change-Id: Ifeb376c2e2edbb5706b2cdc2d08421bd0086b01e
Signed-off-by: Brian Zhu <brian.zhu@amlogic.com>
vpp: 3d: disable crop when 3d playback or hdmi in [1/1]
PD#TV-3962
Problem:
3D mode does not support crop function
Solution:
Remove crop when 3D display.
Verify:
Verified on x301
Change-Id: Id35dd662886be24e3ec78d070e3a70f513f89b16
Signed-off-by: Brian Zhu <brian.zhu@amlogic.com>
vpp: hold the vpp setting when meet the non-dw afbc frame [1/1]
PD#SWPL-7513
Problem:
When meet the non-dw afbc frame, vpp can not display with
scaling down as expected.
Solution:
Hold the current vpp setting and wait provider to switch
non-afbc.
Verify:
x301
Change-Id: I3c0e678d2da42376f3a77e334b8c5ce48460273b
Signed-off-by: Brian Zhu <brian.zhu@amlogic.com>
vpp: increase the afbc burst len as 4 for txlx [1/1]
PD#TV-3132
Problem:
When playing 4K afbc and scaling down to small window,
the vskip is 1 and DDR freq is also lower, the display will
flicker caused by DDR bandwidth issue.
Solution:
Increase the afbc mif burst len from 2 to 4. And enable
the dmc adjustment in that case.
Verify:
r311, verify pass
Change-Id: Ia431a93f6083fd584b7e2eb14f777c5a5e7c20e7
Signed-off-by: Brian Zhu <brian.zhu@amlogic.com>
amvecm: optimize amvecm update in vsync [1/1]
PD#SWPL-6475
Problem:
hdmi input signal, video flicker
Solution:
optimize amvecm update in vsync
Verify:
verify on TL1
Change-Id: I3379333053fc52b8a33747ca83b1d6d68ea874ab
Signed-off-by: MingLiang Dong <mingliang.dong@amlogic.com>
vpp: add histgram test interface for vpp slt test [1/1]
PD#GH-31
Problem:
Need pattern to filter the error vpp modules in SLT test
Solution:
Using clipping and histgram function to create the test pattern
and get the histgram data.
Verify:
verified on w400
Change-Id: I52680c96f568980f71ac8c27c4b66352fea96651
Signed-off-by: Brian Zhu <brian.zhu@amlogic.com>
video: enable pts calculation when hold video state changes [1/1]
PD#TV-3999
Problem:
dtmb individual channel switching speed is slow,
it takes about 16s
Solution:
enable pts calculation when hold video
state changes.
Verify:
X301
Change-Id: I4c8eda3af3df894d8116461abf63c3dda45c8ce3
Signed-off-by: Rui Wang <rui.wang@amlogic.com>
vpp: Modify vframe epoll event [1/1]
PD#SWPL-8850
Problem:
too many print when channel change.
Solution:
Modify vframe epoll event flow to avoid same event.
Verify:
verify on marconi.
Change-Id: Id709439f24d3cad82df6082c477cacce1a9b9cc7
Signed-off-by: qiyao.zhou <qiyao.zhou@amlogic.com>
vpp: Modify vframe epoll event [1/1]
PD#SWPL-8850
Problem:
too many print when channel change.
Solution:
Modify vframe epoll event flow to avoid same event.
Verify:
verify on marconi.
Change-Id: Iefbd190c0280276bf941c48bf99706a0f2573df1
Signed-off-by: qiyao.zhou <qiyao.zhou@amlogic.com>
vpp: set default aspect when the ratecontrol is zero [1/1]
PD#TV-5266
Problem:
Vpp used the wrong aspect ratio in 3D, screen mode = normal
and aspect ratio is 0 in ratecontrol variable.
Solution:
When the aspect ratio is 0, set the default value as
(height << 8) / width
Verify:
Verified by x301
Change-Id: I34f7cd3ce5ed1818d3090ebb4be934225038625e
Signed-off-by: Brian Zhu <brian.zhu@amlogic.com>
amvideo: set black_threshold_height default 48 [1/1]
PD#OTT-1836
Problem:
disable video when window is too small
Solution:
set black_threshold_height default 48
Verify:
U212
Change-Id: I9ed7deb54baef1c44bb9cc0c1a4d699140663864
Signed-off-by: jintao xu <jintao.xu@amlogic.com>
amlvideo: reset video_inuse when amlvideo stop [1/1]
PD#TV-6189
Problem:
video_inuse always is 1 when codec server crash
Solution:
reset video_inuse when amlvideo stop
Verify:
TL1
Change-Id: I5b1b808668e3b2fb78781a4ea1ccbaefc3507d2b
Signed-off-by: Lifeng Cao <lifeng.cao@amlogic.com>
video: Some interlace stream will stuck when pts rebound [1/1]
PD#TV-6236
Problem:
Some interlace stream di has buffer count more than 16
If video pts rebound in this stream. The condition that
(abs(omx_pts_set_index - next_vf->omx_index) <= 16) is
not true. So this frame can not toggle always.
Solution:
Delete this condition that
(abs(omx_pts_set_index - next_vf->omx_index) <= 16)
Verify:
verify TL1
Change-Id: I7e8c12ec72d086b0516f7c7490b492e16e36e8fe
Signed-off-by: Lifeng Cao <lifeng.cao@amlogic.com>
vpp: tm2: add vpp and sr support [1/2]
PD#SWPL-6615
Problem:
Need vpp and sr supprt for sm2
Solution:
add support for tm2
Verify:
test pass on tm2 skt
Change-Id: I0ae2cb178fcbe047cdfec6b4e200424178993e6e
Signed-off-by: Brian Zhu <brian.zhu@amlogic.com>
vpp: tm2: add vd2 function for tm2 [2/2]
PD#SWPL-6615
Problem:
Need vd2 function
Solution:
add vd2 function for tm2:
1.vd2 pps scaler
2.disable vd2 afbc
Verify:
test pass on tm2 skt
Change-Id: I7af5de741b90e443ee065218aecb823ef06d66a7
Signed-off-by: Brian Zhu <brian.zhu@amlogic.com>
Signed-off-by: Luan Yuan <luan.yuan@amlogic.com>
vpp: add interface to force non-afbc path [1/1]
PD#SWPL-7035
Problem:
When DI switched to use VD AFBC, need vpp force to non-afbc first.
Otherwise, display willl flash.
Solution:
Provide new interface to request the vpp release afbc hardware first.
Then return the current afbc status.
Verify:
verified on x301
Change-Id: Ibb2b897db7d2f2c40006433d63709988992c84f1
Signed-off-by: Brian Zhu <brian.zhu@amlogic.com>
PD#SWPL-5314
Problem:
1. add a dummy vframe flag VFRAME_FLAG_EMPTY_FRAME_V4L.
2. add the FRAME_BASE_PATH_V4L_* for v4l2 display
3. recycle vframes when the isr recevie the empty vframe.
Solution:
1. fixed some issues for the v4l2 decode.
2. add pause and resume for v4l2 m2m job.
Verify:
todo
Change-Id: I00b44ad4d3a75f7e2167ca347562d002c2690430
Signed-off-by: Nanxin Qin <nanxin.qin@amlogic.com>
PD#SWPL-10167
Problem:
Apk drop several frames at beginning, but
dolby frames are not consumed, decoder has
no idle buffers.
Solution:
Ignore drop for dual layer dolby video
Verify:
verified on u212
Change-Id: I732d82e71c190c62a14c05accea44b4c55d04239
Signed-off-by: yao liu <yao.liu@amlogic.com>
Signed-off-by: Luan Yuan <luan.yuan@amlogic.com>
PD#SWPL-6028
Problem:
enable ftrce in ramoops for new tm2 dtbs
Solution:
enable ftrce in ramoops for new tm2 dtbs
Verify:
verified ok
Change-Id: Ia7ee3b11784a69ef7d6b7671f9ad75c14ae477f7
Signed-off-by: Jianxin Pan <jianxin.pan@amlogic.com>
Signed-off-by: Luan Yuan <luan.yuan@amlogic.com>
debug: improve ftrace_ramoops for io trace [2/2]
PD#SWPL-6028
Problem:
improve ftrace_ramoops to debug bus hang
Solution:
1. in uboot
setenv initargs $initargs ramoops_io_en=1 loglevel=3;save;reset
2. in linux command line:
cat /sys/module/kernel/parameters/ramoops_io_en
to check if success.
3. after watchdog reboot, get trace data with:
cat /sys/fs/pstore/ftrace-ramoops-0
Verify:
TL1 x301
Change-Id: If1a2582b40a3ded31eedef5355eb0b8a5bf495c3
Signed-off-by: Jianxin Pan <jianxin.pan@amlogic.com>
debug: save irqflag locally when ftrace_ramoops io [1/1]
PD#SWPL-6028
Problem:
save irqflag locally when ftrace_ramoops io
Solution:
save irqflag locally when ftrace_ramoops io
Verify:
TL1 x301
Change-Id: I6df9700cceaccc97dc983d88ada73197a6968f73
Signed-off-by: Jianxin Pan <jianxin.pan@amlogic.com>
debug: do not print old_size when ftrace_size is 0 [1/1]
PD#SWPL-6028
Problem:
do not print old_size when ftrace_size is 0
Solution:
do not print old_size when ftrace_size is 0
Verify:
TL1 x301
Change-Id: I00a71c83fede14a2606c5e7eea5d8c4fdaeb5553
Signed-off-by: Jianxin Pan <jianxin.pan@amlogic.com>
dts: change ftrace-size. [1/1]
PD#SWPL-6028
Problem:
add ftrace-size.
Solution:
add ftrace-size.
Verify:
no.
Change-Id: I42d34edf665632dfe29d04df192964238b8e3df8
Signed-off-by: Jianxiong Pan <jianxiong.pan@amlogic.com>
Signed-off-by: Luan Yuan <luan.yuan@amlogic.com>
PD#SWPL-8648
Problem:
add interface for checks the video profile
Solution:
add interface for checks the video profile
Verify:
u212
Change-Id: I95d0df62fae2debc6c0cc5a4d2adf002122b7630
Signed-off-by: Nanxin Qin <nanxin.qin@amlogic.com>
PD#OTT-4372
Problem:
Need add a extra hdmi_format_para for valid_mode
Solution:
Add a extra hdmi_format_para for valid_mode
Also, fix cedst_en assginment and wrong aud ACR/N parameters when
kernel bootup, need to get current vinfo then set right ARC/N.
Verify:
G12/U212
Change-Id: Ib59986d7436a578daeb7055aa41a379e9381a99b
Signed-off-by: Zongdong Jiao <zongdong.jiao@amlogic.com>
PD#SWPL-8068
PD#SWPL-8069
Problem:
1. use select to polling frame.
Solution:
1. add when use video layer amlvideo support poll
2. add trace debug info
Verify:
Verify on marconi
Change-Id: Ib1ae87b4b7ab35b075bc357953abe43e3410232a
Signed-off-by: shipeng.sun <shipeng.sun@amlogic.com>
Signed-off-by: Tao Guo <tao.guo@amlogic.com>
PD#SWPL-8069
Problem:
1.about 2ms latency due to sleep
2.crash while poll ionvideo
Solution:
1.use semaphore instead of sleep
2.fix poll function
3.add trace info for ionvideo
Verify:
U212
Change-Id: Idde64151541d826ba6a6cd1abcc901e80f0e4b45
Signed-off-by: jintao xu <jintao.xu@amlogic.com>
PD#OTT-4320
Problem:
ge2d canvas_config have been overwritten
Solution:
move ge2d canvas_config from ge2d config to ge2d process
Verify:
w400
Change-Id: I6733751435f9185c8f96287c5308145898c8b8a7
Signed-off-by: Pengcheng Chen <pengcheng.chen@amlogic.com>
gdc: gdc dmabuf multi-process support [1/1]
PD#OTT-4320
Problem:
gdc phys have been overwritten when dma fd is same from diff process
Solution:
when get phys by dma fd, used struct dma_buf instead of dma fd
Verify:
w400
Change-Id: I6e990c9fda9245db0d92053cc011fc6f9507db72
Signed-off-by: Pengcheng Chen <pengcheng.chen@amlogic.com>
ge2d: ge2d dmabuf multi-process support [1/1]
PD#OTT-4320
Problem:
ge2d phys have been overwritten when dma fd is same from diff process
Solution:
when get phys addr by dma fd, used struct dma_buf instead of dma fd
Verify:
w400
Change-Id: Idb32bc61d33345d370db4eb6bcb04351d854f069
Signed-off-by: Pengcheng Chen <pengcheng.chen@amlogic.com>
PD#SWPL-7421
Problem:
gdc output not support multi plane fd
Solution:
add gdc multi plane fd support
Verify:
Verfied on G12B-W400
Change-Id: I898c027f068f92af5101fe65487baf1dfbec7c35
Signed-off-by: Pengcheng Chen <pengcheng.chen@amlogic.com>
ge2d: add ge2d multi plane fd support [2/2]
PD#SWPL-7421
Problem:
ge2d not support multi plane fd
Solution:
add ge2d multi plane fd support
Verify:
Verfied on G12B-W400
Change-Id: Ia8a529833d5c53a70eaa2094f8110635e4f184c1
Signed-off-by: Pengcheng Chen <pengcheng.chen@amlogic.com>
PD#SWPL-4839
Problem:
have risk of unmap ge2d dma_buf
Solution:
unmap ge2d dma_buf after ge2d process finished
Verify:
verify by w400
Change-Id: Ia84786b297f8e95cc9efc038300917c98d6b73f6
Signed-off-by: Pengcheng Chen <pengcheng.chen@amlogic.com>
Signed-off-by: Jian Cao <jian.cao@amlogic.com>
gdc: unmap gdc dma_buf after gdc process stop [2/2]
PD#SWPL-4839
Problem:
have risk of unmap gdc dma_buf
Solution:
unmap gdc dma_buf after gdc process stop
Verify:
verify by w400
Change-Id: If86ac881fd85a5c4b3583567c9748e87149c1d78
Signed-off-by: Pengcheng Chen <pengcheng.chen@amlogic.com>
PD#SWPL-4355
Problem:
ge2d: fix ge2d bitblt error
Solution:
merge patch 'fix ge2d bitblt error' from amlogic-3.14-dev(PD#154877)
Verify:
verified on u200
Change-Id: I4a813810837814931c3cb68f9a0f8a0929b06540
Signed-off-by: pengcheng chen <pengcheng.chen@amlogic.com>
Signed-off-by: Jian Cao <jian.cao@amlogic.com>
ge2d: merge ge2d from amlogic-3.14-dev [2/3]
PD#SWPL-4355
Problem:
ge2d: play video display mess when used ionvideo
Solution:
merge patch 'play video display mess when used ionvideo'
from amlogic-3.14-dev(PD#155143)
Verify:
verified on u200
Change-Id: Iaf34fe1d1c7e7637015dadaaf43e201cf28089b7
Signed-off-by: pengcheng chen <pengcheng.chen@amlogic.com>
Signed-off-by: Jian Cao <jian.cao@amlogic.com>
ge2d: merge ge2d from amlogic-3.14-dev [3/3]
PD#SWPL-4355
Problem:
ge2d: Adjust scaler para when input is nv21 and output is rgb
Solution:
merge patch 'Adjust scaler para when input is nv21 and output is rgb'
from amlogic-3.14-dev(PD#15652)
Verify:
verified on u200
Change-Id: I199b07d683a01175ec17d4d34be6febd3083920c
Signed-off-by: pengcheng chen <pengcheng.chen@amlogic.com>
Signed-off-by: Jian Cao <jian.cao@amlogic.com>
PD#SWPL-4075
Problem:
dst data is not normal by using strechblit function
such as 1920x1080 --> 640x360
Solution:
add bit width restriction for
horizontal scaler initial phase
Verify:
verified on g12b-w400
Change-Id: Ibcd85cc08f49254e90100beb952e711736531134
Signed-off-by: Jian Cao <jian.cao@amlogic.com>
ge2d: add enhanced hsc adv num support [2/2]
PD#SWPL-4075
Problem:
add enhanced hsc adv num support
Solution:
add enhanced hsc adv num support
Verify:
verified on g12b-w400
Change-Id: I13b52a0b10e8f3830c57ff691ef3472a34cbe89c
Signed-off-by: Jian Cao <jian.cao@amlogic.com>
PD#SWPL-3876
Problem:
add support for nv16
Solution:
add support for nv16
Verify:
verified on g12a-u200
Change-Id: I34c9179ed4fde43b9bd00caa9505ea4c8ee78eb0
Signed-off-by: Jian Cao <jian.cao@amlogic.com>
PD#SWPL-6361
Problem:
Lack SCDC/CED function to check Rx TMDS status
Solution:
Add SCDC/CED function
By default, this function is not open.
Enable it in board dts file like below:
&amhdmitx {
cedst_en = <1>;
};
Also, you can manually enable it by
'echo 1 > /sys/class/amhdmitx/amhdmitx0/cedst_policy'
Then listen '/sys/class/extcon/hdmi_cedst/uevent'
and check 'cat /sys/class/amhdmitx/amhdmitx0/cedst_count'
Verify:
G12/U212
Change-Id: Ic9c90936bad643ea95d418d7b019eb37210d7123
Signed-off-by: Zongdong Jiao <zongdong.jiao@amlogic.com>
PD#SWPL-8903
Problem:
S905D3 project need bring up gc2145 mipi camera
Solution:
bring up gc2145 mipi camera on S905D3-AC202
Verify:
verify on S905D3-AC202
Change-Id: I5c7c3c551eca7ec20759e724c24d725f89641d96
Signed-off-by: Guosong Zhou <guosong.zhou@amlogic.com>
PD#OTT-3716
Problem:
In GX, there is the I2C_REACTIVE method to avoid the I2C hangup
issue. But it is fixed in G12, so need replace it.
Solution:
Replace I2C_REACTIVE with I2C_RESET logic
Verify:
G12/U212
Change-Id: I1ca2f77a213db0d7de067745b3701816b7c85c27
Signed-off-by: Zongdong Jiao <zongdong.jiao@amlogic.com>
PD#SWPL-6157
Problem:
TM2 bring up need to update chip version name and id
Solution:
add the chipid and chip version name at dts and help file
Verify:
on ptm board4
Change-Id: I37e44828db1821c7fd2921c3e4271a27bd715b88
Signed-off-by: pan yang <pan.yang@amlogic.com>
Signed-off-by: Luan Yuan <luan.yuan@amlogic.com>
PD#IPTV-1032
Problem:
Need support 1440x2560p60hz
Solution:
Porting VESA code and 1440x2560p60hz
Verify:
g12b/w400
Change-Id: I3cf38bebc29b76aed50fe2ced7b47e27f2d1af06
Signed-off-by: Kaifu Hu <kaifu.hu@amlogic.com>
PD#OTT-3711
Problem:
color parameters are wrong
while displaying images on NativeImagePlayer
Solution:
add a macro BT_STANDARD for 709 or 601
Verify:
verified on W400
Change-Id: I0703ef17748c8267b86e85a4366cac88d3e41ee1
Signed-off-by: Jian Cao <jian.cao@amlogic.com>
PD#SWPL-6338
Problem:
need to add dv interface in tm2
Solution:
choose dv in UI and play films, observe the video and
graphic
Verify:
ab301 verify ok
Change-Id: I5d85b195254a16bcc9046d258728bd41d8a809d5
Signed-off-by: Yi Zhou <yi.zhou@amlogic.com>
Signed-off-by: Luan Yuan <luan.yuan@amlogic.com>
PD#TV-5832
Problem:
when mmu scatter tail is freed. sometimes sao mmu is not
stopped or in idle. there is potential memory pollution
Solution:
before free unused scatter, to check hw statu idle and
diable sao mmu to avoid hevc back overwrite system memory
Verify:
X301
Change-Id: Ib784809a0946bd0a6c479a98678cb40edacc4118
Signed-off-by: Hui Zhang <hui.zhang@amlogic.com>
PD#SWPL-8670
Problem:
G12B report response crc error when hs400 200M busmode
Solution:
find a eyetest hole between 14-20 or 48-54, otherwise
tuning tx_delay and find again and
adjust CMD rx timing dynamically in HS400 mode
Verify:
passed on G12B
Change-Id: I23e4d5118e0ca0564367a77102aea9e1085633a9
Signed-off-by: Long Yu <long.yu@amlogic.com>
