PD#SWPL-6985
Problem:
cfo track value is small
Solution:
increase cfo track val to avoid crystal jitter
Verify:
verified by t962x2_x301
Change-Id: Ifcf53f1d06eae204a82dc99154d18c38f370ebc1
Signed-off-by: zhiwei.yuan <zhiwei.yuan@amlogic.com>
PD #SWPL-6027
Problem:
dmabuf panic when vout1,vout2 run at same time.
Solution:
When do pandisplay, only release the dma buf displayed
on current vout pipeline.
Verify:
Verify on macroni.
Change-Id: I8951d55f9f56cbfa509bcbe2906a108c5f50dbfe
Signed-off-by: sky zhou <sky.zhou@amlogic.com>
PD#172587
Problem:
add viu2 support for tl1.
Solution:
add viu2 support for tl1.
Verify:
verified by x301
Change-Id: Ie728f6ee7e0c4c4062e5e12e3d80515d99d020f8
Signed-off-by: pengcheng chen <pengcheng.chen@amlogic.com>
ff60d15 osd: calc osd parameters used num/den replace left/right shift
[1/1]
481d4f2 osd: set hdr size according osd blend0 out size [1/1]
42b54ce osd: afbc decode error when loop viu1 to vdin [1/1]
91bda20 osd: fix afbc decoder error caused flicker in display [1/1]
799ba4c osd: fix hotplug hdmi causes system crash [1/1]
e9fadfe5 osd: fix osd afbc can't display on android5.1 [1/1]
1f8aa33 osd: frame just display on half screen [1/1]
7bcfa18 osd: set osd1 scaler before osd blend [1/1]
6913eaa osd: osd display color abnormal when run drm [1/1]
6862fb2 osd: add viu2 fence support [1/1]
f59b7a6 drm: a113d support drm issue [1/1]
50557a1 osd: reset afbcd flag when convert format value [1/1]
cfbcb3d osd: fix buidroot compile error issue [1/1]
6163540 osd: rdma write miss caused afbc mosaic [1/1]
032a712 osd: fix display frame offset caused osd display abnormal [1/1]
2c1269e osd: osd: recovey mode always blank [1/1]
3be570b osd: osd: reserve vs_ctrl bit for VPP [1/1]
40bfe97 osd: add viu2 support for tl1 [1/1]
osd: osd: reserve vs_ctrl bit for VPP [1/1]
PD#172587
Problem:
reserve vs_ctrl bit for VPP
Solution:
Avoid operating VPP_OFIFO_SIZE bit19 on OSD code
Verify:
verified on t962x2_x301
Change-Id: Ic450d6f64e2349d97d02f0802058b4031564fea4
Signed-off-by: Jian Cao <jian.cao@amlogic.com>
osd: osd: recovey mode always blank [1/1]
PD#TV-1287
Problem:
recovey mode always blank
Solution:
set right condition to enable free_scale
Verify:
verified on P321 board
Change-Id: I2f70b9c5436b30156f157a3297a11a2ef1cfec67
Signed-off-by: Jian Cao <jian.cao@amlogic.com>
osd: fix display frame offset caused osd display abnormal [1/1]
PD#OTT-1663
Problem:
display frame offset caused osd display abnormal
Solution:
remove unnecessary blend dst_data adjust
Verify:
Locally on raven
Change-Id: I38b97f6da750f5edea97416b4d7fc0172dea7466
Signed-off-by: Pengcheng Chen <pengcheng.chen@amlogic.com>
osd: rdma write miss caused afbc mosaic [1/1]
PD#SWPL-4502
Problem:
afbc mosaic when bandwidth is high, root cause is
rdma write regs missed.
Solution:
1. add vsync line detected, if rdma write nearly
vsync, wait vsync needed
2. add rdma write detected, if rdma write missed
wait vsync needed
3. add tl1/g12b afbc backup
Verify:
Locally on tl1
Change-Id: If4fd303c3808525fa44e1118742a3e26830323f5
Signed-off-by: Pengcheng Chen <pengcheng.chen@amlogic.com>
osd: fix buidroot compile error issue [1/1]
PD#SWPL-4502
Problem:
buidlroot compile error
Solution:
fix buidroot compile error issue
Verify:
buildroot make linux-build
Change-Id: I0277c2b3f439946ab680f4c34f30c16e31ea6034
Signed-off-by: Pengcheng Chen <pengcheng.chen@amlogic.com>
osd: reset afbcd flag when convert format value [1/1]
PD#SWPL-5185
Problem:
"fence color format error 28" when test weston-simple-egl
Solution:
reset afbcd flag when convert format value
Verify:
Locally on g12b_w400
Change-Id: I81a9394288026bc596f6b3438cec72ceaad7749f
Signed-off-by: Jian Cao <jian.cao@amlogic.com>
drm: a113d support drm issue [1/1]
PD#SH-397
Problem:
use modetest to test A113D DRM function, displaying is incorrect
Solution:
add linear addr config for a113d drm mode
Verify:
verified on s400
Change-Id: Id6a2c6ad94bc0148815076561d9dc2ae8ded6884
Signed-off-by: Dezhi Kong <dezhi.kong@amlogic.com>
osd: add viu2 fence support [1/1]
PD#SWPL-6384
Problem:
viu2 not support fence
Solution:
add viu2 fence support.
Verify:
test pass on tl1
Change-Id: I94a5e483c88cace79b7386bb918c203ada6b8274
Signed-off-by: Pengcheng Chen <pengcheng.chen@amlogic.com>
osd: osd display color abnormal when run drm [1/1]
PD#SWPL-6867
Problem:
osd dispaly color abnormal because osd enable not update.
Solution:
update osd enalbe flag in drm process.
Verify:
Verified u212
Change-Id: I1c2e8b62d9d5af203c95d3d0ac940fb512dd8e5e
Signed-off-by: Pengcheng Chen <pengcheng.chen@amlogic.com>
osd: set osd1 scaler before osd blend [1/1]
PD#SWPL-6596
Problem:
bring up osd for TM2
Solution:
set osd1 scaler before osd blend
Verify:
Verified on T962e2_ab319
Change-Id: I9e7d5fa83b2edc8e9359371695ea46fa3b39e09c
Signed-off-by: Pengcheng Chen <pengcheng.chen@amlogic.com>
osd: frame just display on half screen [1/1]
PD#SWPL-7039
Problem:
bring up osd for TM2
frame just display on half screen
Solution:
fix field_out_en value from array
Verify:
Verified on T962e2_ab319
Change-Id: Id07f3d813242f031125fcac11d3fa05205895448
Signed-off-by: Jian Cao <jian.cao@amlogic.com>
osd: fix osd afbc can't display on android5.1 [1/1]
PD#SWPL-6869
Problem:
afbc can't display with android5.1, because blank enable
called before afbc set, which make osd enable not updated
and afbc not enable when hwc post frame
Solution:
if mali afbc enable, call osd enable.
Verify:
verified on x301
Change-Id: I1d727a586a66c6e7848d09dfb5c5b74ff7a2e3e6
Signed-off-by: Shuide Chen <shuide.chen@amlogic.com>
osd: fix hotplug hdmi causes system crash [1/1]
PD#SWPL-7009
Problem:
hotplug hdmi causes system crash
when unplug hdmi display mode is null, hwc hasn't received
event and post frame normal but osd vsync lost, which caused
wait hw vsync timeout(1s), and fd leak.
Solution:
when process every frame, if display mode is null, exit frame process
just process fence.
Verify:
verified on Raven, franklin
Change-Id: Icbe7cd76776e46a6ed79c6cee3ea05772cc5f9d2
Signed-off-by: Pengcheng Chen <pengcheng.chen@amlogic.com>
osd: fix afbc decoder error caused flicker in display [1/1]
PD#OTT-3000
Problem:
afbc decoder error caused flicker in display.
Solution:
close osd prefetch.
Verify:
Verified with raven
Change-Id: I44356c028b41e251f7a98b5e931b2cbd583b0829
Signed-off-by: Pengcheng Chen <pengcheng.chen@amlogic.com>
osd: afbc decode error when loop viu1 to vdin [1/1]
PD#TV-5024
Problem:
afbc decode error when loop viu1 to vdin.
Solution:
set osd hold line to max if vinfo is dummy_panel
Verify:
Tl1 X301
Change-Id: I0ebb312d381accb1890233164f071a095310d2f1
Signed-off-by: Pengcheng Chen <pengcheng.chen@amlogic.com>
osd: set hdr size according osd blend0 out size [1/1]
PD#IPTV-2395
Problem:
osd last line have abnormal data
Solution:
set hdr size according osd blend0 out size
Verify:
Verfied on u212
Change-Id: Iad738b16fce066270c78213f1b696a802e1b8da6
Signed-off-by: Pengcheng Chen <pengcheng.chen@amlogic.com>
osd: calc osd parameters used num/den replace left/right shift [1/1]
PD#OTT-3615
Problem:
a line on the right displayed
Solution:
calc osd parameters used num/den replace left/right shift
Verify:
Verfied on u212
Change-Id: If59d9de0bb3c525d2b67d05ec449d458fbbcdfe2
Signed-off-by: Pengcheng Chen <pengcheng.chen@amlogic.com>
PD#OTT-3716
Problem:
In GX, there is the I2C_REACTIVE method to avoid the I2C hangup
issue. But it is fixed in G12, so need replace it.
Solution:
Replace I2C_REACTIVE with I2C_RESET logic
Verify:
G12/U212
Change-Id: I1ca2f77a213db0d7de067745b3701816b7c85c27
Signed-off-by: Zongdong Jiao <zongdong.jiao@amlogic.com>
PD#OTT-3760, PD#SWPL-8309
Problem:
startup ott, cvbs out with pop noise
Solution:
Set gpio init low
Verify:
verified by franklin
Change-Id: Ieb33e72473055fad69bc8e9a68ed0b0552e9f029
Signed-off-by: Zhe Wang <Zhe.Wang@amlogic.com>
PD#TV-5764
Problem:
Goto the wrong case when using ext_sar
Solution:
Using the correct case when using ext_sar
Verify:
verified on r311
Change-Id: I181b9e8d21917840729f2e487b3dae3f41cd2c5a
Signed-off-by: Peng Yixin <yixin.peng@amlogic.com>
PD#OTT-2168
Problem:
media control bar can't displayed because afbc source crop not support
Solution:
add afbc source crop support
Verify:
verify on raven
Change-Id: Ib1f925aeea12ba18d8f976aba8c84f0738c41293
Signed-off-by: Pengcheng Chen <pengcheng.chen@amlogic.com>
PD#SWPL-9127
Problem:
the id pin of the type-c is aways high, whether it is connected to u disk
or usb cable.
Solution:
It need set vbus high when the usb mode is host only.
Verify:
test passed on sm1
Change-Id: I4ff8a9b5419b54828ecd797a78d149da98535dee
Signed-off-by: he.he <he.he@amlogic.com>
PD#SWPL-70
Problem:
arm isp can't get reserved mem
Solution:
reduce isp reserved mem
Verify:
w400
Test: camera preview and capture OK
Change-Id: Icaf630a25a55d31ec3ed68cae48fb840017c9fc0
Signed-off-by: Jiacheng Mei <jiacheng.mei@amlogic.com>
PD#SWPL-9593
Problem:
dtv audio is heard slower in spk
Solution:
when mclk is changed, spdif clk changes correspondingly in samesource case
Verify:
X301
Change-Id: I15fcb598ba893762580f0a5aac856376af8c94ec
Signed-off-by: Zhe Wang <Zhe.Wang@amlogic.com>
PD#SWPL-7606
Problem:
EQ/DRC module is out of work
Solution:
bringup EQ/DRC module
Verify:
verified on ac200
Change-Id: Ibd9b1e65aaed2ecd5f3086e4325d6b92fe34b040
Signed-off-by: Zhe Wang <Zhe.Wang@amlogic.com>
Signed-off-by: Luan Yuan <luan.yuan@amlogic.com>
PD#SWPL-9142
Problem:
Audio Abus may be stuck if it is stopped
when the burst is not finished.
And the stuck can't be recovered
unless reboot the system.
Solution:
Add check to make sure that the transfer
is over then start to disable the toddr fifo.
Verify:
TL1 stress test.
Change-Id: I28dcf84ddec421bc70370b2544f0bf1f3272e7b4
Signed-off-by: Shuai Li <shuai.li@amlogic.com>
PD#TV-6005
Problem:
change time sequence for extern AMP
Solution:
1) enable tdm clk before codec init, when system resume
Verify:
test on X301
Change-Id: I3d6411cd32fbc3496bed942c72b7bec408d66959
Signed-off-by: Zhe Wang <Zhe.Wang@amlogic.com>
Signed-off-by: Luan Yuan <luan.yuan@amlogic.com>
PD#TV-5865
Problem:
audio hdmiin freq responds test fail
Solution:
enable hw audio resample filter
Verify:
X301 marconi
Change-Id: I78699848049abe6a6b1b682e5a7bb2130fb16c09
Signed-off-by: Zhe Wang <Zhe.Wang@amlogic.com>
audio: set resample clk to mclk of tdm [1/2]
PD#TV-5865
Problem:
hdmiin frequency responds test fail.
Solution:
set resample clk to mclk of tdm
Verify:
X301
Change-Id: I22c92219bcea534bdec2bc526d535cacd971faa5
Signed-off-by: Zhe Wang <Zhe.Wang@amlogic.com>
PD#TV-6267
Problem:
internal codec pointer operation error
Solution:
use 4.9 ALSA standard API to get the codec handle.
Verify:
R311
Change-Id: I52567a914230083054dc0413f818356d71c83a53
Signed-off-by: Jian Xu <jian.xu@amlogic.com>
PD#SWPL-6801
Problem:
There is too much kernel print which
blocks the system
Solution:
Add condition to remove the print log
Verify:
A113
Change-Id: I5762893b424e8201e2725f33854473097f1246b9
Signed-off-by: yujie.wu <yujie.wu@amlogic.com>
PD#SWPL-7465
Problem:
1.bus crash
Solution:
1. add debug info only for tl1;
2. increase protection for unreg;
Verify:
x301
Change-Id: I84c0058bc22310f87407de1bf56f7a5eb92fd2ed
Signed-off-by: Jihong Sui <jihong.sui@amlogic.com>
PD#OTT-2650
Problem:
Play local video, when source window size change,
flashing occur. about two frame is not right
Solution:
There have a bug when source window size change, current
frame width was copied to post ready frame. so every
frame backup width saved in to current frame private buffer.
Verify:
TL1
Change-Id: I1b82dcfcfaeffaad6b28a7871014e12f0d157004
Signed-off-by: Yong Qin <yong.qin@amlogic.com>
PD#SWPL-6762
Problem:
di clkb frq is not right
Solution:
change from 500 to 667
Verify:
tl1
Change-Id: I9242fec37f7527203d1d00cbcdfb79c4f09e9595
Signed-off-by: Yong Qin <yong.qin@amlogic.com>
Signed-off-by: Luan Yuan <luan.yuan@amlogic.com>
PD#SWPL-7006
Problem:
TL1 cave video 1080i 60hz have drawing.
Solution:
dark scenes don't into pulldown32 by vlsi yanling
Verify:
TL1
Signed
Change-Id: Ib77c0f99940c416943baa9b9a8a02a059b274e5b
Signed-off-by: Wenfeng Guo <wenfeng.guo@amlogic.com>
PD#SWPL-5205
Problem:
Now vdin support afbc+interlace format
Solution:
In vpp, add case to support vdin afbc with interlace
Verify:
tl1_x301, verify pass
Change-Id: I6540b03a6cb5308fc2bc202069aa87234fd35df6
Signed-off-by: Yong Qin <yong.qin@amlogic.com>
Signed-off-by: Luan Yuan <luan.yuan@amlogic.com>
a6973fc di: small window bottom of the screen no video [1/1]
fed45cd di: small window bottom of the screen is blank [1/1]
fb34727 deinterlace: fix tl1 in 1080i has small sawtooth [1/1]
66bdbe7 di: bringup for tm2 [1/1]
13ebe46 di: monkey test di cause crash [1/1]
2c8ed09 di: "DI: di_init_buf vmap fail" is seen when power on [1/1]
7ba6477 di: av to dtv , black screen [1/1]
5970920 di: The last frame of the video flash garbage [1/1]
8c3e98d di: flash green when play 265 SD video [1/1]
975c0ee di: exit play local 4k video flashing [1/1]
edc1970 di: pretect reg unreg flow [1/1]
030872b di: 1080p,the screen display anormal [1/1]
3f4854e di: support the interlace format from vdin afbc [2/2]
89a190a vpp: support the interlace format from vdin afbc [1/2]
di: support the interlace format from vdin afbc [2/2]
PD#SWPL-5205
Problem:
support afbc from vdin and decoder on tl1
Solution:
1.add this function
2.support from vdin and decoder
Verify:
tl1
Change-Id: I258d40ad5706f4a9a5749298dd9a33a9b4bbafa2
Signed-off-by: Yong Qin <yong.qin@amlogic.com>
Signed-off-by: Luan Yuan <luan.yuan@amlogic.com>
di: 1080p,the screen display anormal [1/1]
PD#SWPL-5874
Problem:
1080p the screen display anormal
Solution:
compress mode, modify vdin frame type.
Verify:
tl1
Change-Id: Ic1ee1472105861c8debce2a1645f70ed617fd132
Signed-off-by: Yong Qin <yong.qin@amlogic.com>
Signed-off-by: Luan Yuan <luan.yuan@amlogic.com>
di: pretect reg unreg flow [1/1]
PD#SWPL-4918
Problem:
when reg unreg event called too fast, di cause system crash
Solution:
pretect reg and unreg flow
Verify:
tl1
Change-Id: I9b3e28c2b0b709d4f53f60b1f044a390933117ce
Signed-off-by: Yong Qin <yong.qin@amlogic.com>
Signed-off-by: Luan Yuan <luan.yuan@amlogic.com>
di: exit play local 4k video flashing [1/1]
PD#SWPL-5877
Problem:
1.afbc mode, play h.265 local video, when exit playing,
screen will flashing sometimes.
2.when exit playing, there cost 5s time.
Solution:
4k video di bypass, afbc hw module used by vpp, when
DI unreg, needn't to disable AFBC moudule.
Verify:
tl1
Change-Id: I2ac66a145a009042d286dda50e7259657f4bfc8e
Signed-off-by: Yong Qin <yong.qin@amlogic.com>
di: flash green when play 265 SD video [1/1]
PD#SWPL-6097
Problem:
flash green garbages when play h.265 SD video
Solution:
afbc input not enable
Verify:
tl1
Change-Id: I310eeb6d922ab8b9035c815afc4e967c0e5390ff
Signed-off-by: Yong Qin <yong.qin@amlogic.com>
di: The last frame of the video flash garbage [1/1]
PD#SWPL-6070
Problem:
flash garbages when unreg process.
Solution:
can't speed down the clkb rate, there is a mirror mode
Verify:
tl1
Change-Id: I5fcc29a1cda196992a457f40fee31992f4bc1528
Signed-off-by: Yong Qin <yong.qin@amlogic.com>
di: av to dtv , black screen [1/1]
PD#SWPL-6096
Problem:
from local av switch to dtv，black screen,then search channel
Solution:
revert the modification "62617"
Verify:
tl1
Change-Id: I49ae627b9f0b1f6a776e5cbffc723a43e85cee72
Signed-off-by: Yong Qin <yong.qin@amlogic.com>
di: "DI: di_init_buf vmap fail" is seen when power on [1/1]
PD#SWPL-5908
Problem:
execute vmap when di reserved memory is disable
Solution:
skip memory calculation in init buf while using cma
Verify:
verified by t962x2_x301
Change-Id: Ib0c2e422f61f2b4182109cb7bbb3107029363ce0
Signed-off-by: zhiwei.yuan <zhiwei.yuan@amlogic.com>
di: monkey test di cause crash [1/1]
PD#SWPL-6133
Problem:
monkey test di cause crash,when is di reg processing, unreg event
attach, and released the di buffer, so cause crash.
Solution:
every unreg event received, need waitting reg process had done.
Verify:
tl1
Change-Id: I2f2bb068ed65ab14ab4f09de96b64d7290da5914
Signed-off-by: Yong Qin <yong.qin@amlogic.com>
di: bringup for tm2 [1/1]
PD#SWPL-6575
Problem:
chip bring up
Solution:
1.add tm2 chip id for tm2
2.add h scaling down function for tm2
Verify:
tm2
Change-Id: I364d7c07be331d81ef546357445225c6071f8e3c
Signed-off-by: Yong Qin <yong.qin@amlogic.com>
Signed-off-by: Luan Yuan <luan.yuan@amlogic.com>
deinterlace: fix tl1 in 1080i has small sawtooth [1/1]
PD#SWPL-4072
Problem:
tl1 1080i in some dark scenes and roller coasters
have small sawtooth
Solution:
adjust a set of registers with special motion
Verify:
tl1
Change-Id: Idbe62e823f1c6c683b67d000978de1862c8e3162
Signed-off-by: Wenfeng Guo <wenfeng.guo@amlogic.com>
Signed-off-by: Luan Yuan <luan.yuan@amlogic.com>
di: small window bottom of the screen is blank [1/1]
PD#TV-4708
Problem:
small window, bottom of the screen is covered by
blank on the online video
Solution:
vline is odd, mif out is not right
Verify:
verify on TL1
Change-Id: I39eb0cdfd2f4b200a09a9c8b779f509caf6dea37
Signed-off-by: Yong Qin <yong.qin@amlogic.com>
di: small window bottom of the screen no video [1/1]
PD#TV-4708
Problem:
small window,v scaling mode, bottom of the screen is no video.
Solution:
vline is odd, mif out is not more enouth
Verify:
verify on TL1
Change-Id: I2ac35af3632e8b14df5c773b322d4b2d64b050ba
Signed-off-by: Yong Qin <yong.qin@amlogic.com>
PD#SWPL-6157
Problem:
TM2 bring up need to update chip version name and id
Solution:
add the chipid and chip version name at dts and help file
Verify:
on ptm board4
Change-Id: I37e44828db1821c7fd2921c3e4271a27bd715b88
Signed-off-by: pan yang <pan.yang@amlogic.com>
Signed-off-by: Luan Yuan <luan.yuan@amlogic.com>
PD#IPTV-1032
Problem:
Need support 1440x2560p60hz
Solution:
Porting VESA code and 1440x2560p60hz
Verify:
g12b/w400
Change-Id: I3cf38bebc29b76aed50fe2ced7b47e27f2d1af06
Signed-off-by: Kaifu Hu <kaifu.hu@amlogic.com>
PD#SWPL-9254
Problem:
uncached display unexpectly.
Solution:
Technically, calling dma_buf_map_attachment should return a buffer
properly dma_mapped. Add calls to dma_map_sg to begin_cpu_access to
ensure this happens. As a side effect, this lets Ion buffers take
advantage of the dma_buf sync ioctls.
Verify:
galilei, franklin
Change-Id: Ib6ca06e59e81031d3c65c2df8824b46baaba6c9f
Signed-off-by: Laura Abbott <labbott@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Jiyu Yang <Jiyu.Yang@amlogic.com>
PD#SWPL-9254
Problem:
Ion currently returns a single sg_table on each dma_map call. This is
incorrect for later usage.
Solution:
dup sg table on each dma_map call
Verify:
galilei, franklin
Change-Id: I6df2baa33bba9303b2ac25210ebaf56a337d56a2
Signed-off-by: Laura Abbott <labbott@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Jiyu Yang <Jiyu.Yang@amlogic.com>
PD#OTT-4262
Problem:
When disable video before unreg, cur_pipbuf will not set to NULL.
Next time playback will tog this buffer.
Solution:
Free cur_pipbuf when vd2 is closed in unreg.
Verify:
U212
Change-Id: Ie381ae9feda8a5d23a93b3a5974d9c0af87e6d6e
Signed-off-by: jintao xu <jintao.xu@amlogic.com>
PD#SWPL-6903
Problem:
pcr increase automatic after system reset
Solution:
in non-tunnel mode, only after video stop post will adjust pcr
in omx_secret_mode. Also clear pcr in video stop
Verify:
verify by nts
Change-Id: I528229e8121a99e50c7b8313bd8dc867e3710ad8
Signed-off-by: shuanglong.wang <shuanglong.wang@amlogic.com>
PD#SWPL-9298
Problem:
add dts config for P281
Solution:
add dts config for P281(from P212)
the difference as follows:
framebuffer from 1080p to 720p
gpu max freq from 750 to 666
Verify:
verify by p281
Change-Id: Ice6bcbd11fd831daeb6620d1780628494c8a10fa
Signed-off-by: Luan Yuan <luan.yuan@amlogic.com>
PD#SWPL-8806
Problem:
the driver strength is type 1 on sm1
Solution:
modify sm1 dts
Verify:
passed on sm1_ac213
Change-Id: Iea5093541dc0bbd08954e78827309a45a84efc60
Signed-off-by: Ruixuan Li <ruixuan.li@amlogic.com>
Signed-off-by: Luan Yuan <luan.yuan@amlogic.com>
PD#SWPL-8250
Problem:
1 check my patch to Mingliang on trunk
2 980 check vsif and frame timing confirm if vsif is one frame ahead
or not
Solution:
The data is the same as the standard of SPEC.
Verify:
on x301
Change-Id: I39ea8cb5d84c8b5b15109ed65f2428a4ec2c6c68
Signed-off-by: chengwang <cheng.wang@amlogic.com>
PD#OTT-3711
Problem:
color parameters are wrong
while displaying images on NativeImagePlayer
Solution:
add a macro BT_STANDARD for 709 or 601
Verify:
verified on W400
Change-Id: I0703ef17748c8267b86e85a4366cac88d3e41ee1
Signed-off-by: Jian Cao <jian.cao@amlogic.com>
